Programmer Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Programmer products.

Tip: include the full model number printed on your Programmer label for the best match.

Programmer manuals

Puist as ùire, leabhraichean-làimhe sònraichte, agus leabhraichean-làimhe ceangailte ri luchd-reic airson a’ bhrand seo tag.

Stiùireadh Prògramair Teirmeastat CHC WB10 UFH

Dùbhlachd 2, 2025
CHC WB10 UFH Thermostat Programmer Specifications Product Name: WB10 Wiring Center Compatible with: Radiator or HWC Control, UFH Thermostat Programmer Features: Zone 10 Radiator Thermostat/Programmer, Volts Free Appliance Switching, UFH Motorised Valve Product Usage Instructions Installation Ensure power is switched…

Leabhar-stiùiridh GODIYMODULES Pro-341A-001

20 an Dàmhair, 2025
GODIYMODULES Pro-341A-001 Sònrachaidhean Tionndadh: Solas Dathte Tionndadh v1.5, v1.6, v1.7 Meud Toraidh Uile-choitcheanntage: 1.8v, 2.5v, 3.3v (default), 5v Supported Modes: Programmer mode, TTL output Additional Features: Infrared code measurement, Colored light indicators Product Usage Instructions CH341A Programmer Introduction Provide an…

Stiùiridhean Prògramair SMARTRISE C4 Link 2

1 Sultain, 2025
SMARTRISE C4 Ceangal 2 Prògramadair thairisview This document provides step-by-step instructions for downloading, installing, and using the Link2 Programmer with C4 controllers. It explains how to load software onto the C4 controller using the Link2 Programmer. Required Tools for Software…

Stiùireadh Cleachdaiche airson Prògramair Iuchrach Autek IKEY820

13 an t-Iuchar, 2025
Prògramadair Iuchrach IKEY820 LIOSTA GHNÌOMHAN IMMO IKEY820 NOTA: THA——Gnìomh air a thaic. N/A——Chan eil feum air a’ charbad shònraichte. [bàn]——Gnìomh gun taic no Chan eil mi cinnteach; Dèanamh Modail Bliadhna Còd-puist Iuchrach Gnìomhan Iomallach Acura ILX 2013-2016 N/A/A THA CUIR RIS GUN IUCHAIR SGUAB ÀS GUN IUCHAIR UILE…

Stiùireadh Cleachdaiche Prògramadair Modail XTOOL X2MBIR

3 an t-Ògmhios, 2025
XTOOL X2MBIR Module Programmer Disclaimer Please read this manual carefully before using X2Prog Module Programmer (herein after referred to as X2Prog). Shenzhen Xtooltech Intelligent Co., Ltd. (herein after referred to as "Xtooltech") does not assume any liability in case of…

Stiùireadh Cleachdaiche Prògramadair Modail XTOOL X2TPU

3 an t-Ògmhios, 2025
X2TPU Module Programmer Specifications: Product Name: X2TPU Module Programmer Manufacturer: Shenzhen Xtooltech Intelligent Co., Ltd. Functionality: Read, write, and modify EEPROM and MCU chip data via BOOT method Compatibility: Professional vehicle tuners or mechanists for module cloning, modification, or replacements…

Stiùireadh Prògramair SMARTRISE C4 Link2

20 an Cèitean, 2025
C4 Link2 Programmer Specifications Product: C4 LINK2 PROGRAMMER Version: 1.0 Date: March 3, 2025 Product Usage Instructions 1. Overview This document provides step-by-step instructions for downloading, installing, and using the Link2 Programmer with C4 controllers. It explains how to…