Owner's Manual for POTTER models including: PNA Portable Nitrogen Analyzer, PNA, Portable Nitrogen Analyzer, Nitrogen Analyzer
Potter PNA Portable Nitrogen Analyzer - Fire Alarm Resources - Free fire alarm PDF manuals, documents, installation instructions, and technical specifications
File Info : application/pdf, 1 Pages, 822.54KB
DocumentDocumentFeatures · Durable N2 analyzer · One-button calibration · Auto-off · 3-digit display · Maintenance free Portable Nitrogen Analyzer Description The Portable Nitrogen Analyzer is an easy way to determine the purity of nitrogen that the Potter Nitrogen Generator is producing. Since the analyzer is portable, it gives you the ability to check the end of the line purity of the fire sprinkler system, ensuring the system is protected. Store the N2 analyzer in a temperature similar to its ambient environment of daily use. Operation Prior to turning on the unit, wait 5 minutes to allow the sensor to reach equilibrium. Using the "ON/OFF" key, make sure the unit is in the power "ON" mode. Press and hold the Calibration Key for 3 seconds until the display reads "CAL". This will calibrate the N2 Analyzer to room air. A new calibration is required when the measured N2 percentage is above 80.1% N2 or below 78.1% N2. The N2 Analyzer is ready to use. Ordering Information Model PNA Description Portable Nitrogen Analyzer Stock No. 1119504 Technical Specifications Measurement Range Resolution Operating Temperature Storage Temperature Sensor Type Battery Type 0-99.9% 0.1% Nitrogen 15°C to 40°C (59°F to 104°F) -15°C to 50°C (5°F to 122°F) Galvanic fuel cell 3V Lithium button cell (non-replaceable) Potter Electric Signal Company, LLC · St. Louis, MO · Phone: 800-325-3936 · www.pottersignal.com 5401581 - REV A · 09/17 PAGE 1 OF 1 firealarmresources.com