CALIBRE HWP303U Leabhar-làimhe Cleachdaiche Socaid Cumhachd Smart
SÒNRAICHTEAN
- Smart 3 way socket type F
- Aplacaid an-asgaidh “Calibre SMART HOME”
- Wireless Protocols – Bluetooth® and Wi-Fi freq. 2.4GHz
- Physical ON/OFF button
- All 3 plug sockets can be switched on/off independently, USB outlets switch on/ off simultaneously.
- Fad càbaill: 1,5 meatairean
- 4 USB charge outputs
- USB Smart charging: 2.4A
- USB DC output: 5.0V/2.4A Max (4.2A max. total) 21W total power
- Child proof power socket
- Rated Current: 3x 8A outputs (1840W • max. 16A / 3680W Total)
- ABS+PC Fire retardant
- IP20 air a rangachadh
- Power supply: AC 110V-240V~, 50/60HZ
- Smart Home – powered by Tuya
- Accessible by multiple devices (phones, tablets, etc)
- Hacker proof ISO27017:2015
- APP works with any internet connection (WiFi or mobile data)
Modh Conaltraidh: Wi-Fi 802.11 b/g/n (2.4GHz) Max e.r.p: <100mW/20dBm Bluetooth® 2402-2480 Mhz Max e.r.p: <100mW/20dBm
Solar cumhachd: AC 110V-240V ~ 50HZ/60Hz
Rangaichte An-dràsta: 16A (3840W)
PRODUCT THOIRVIEW
The smart EU 3 way socket is a Wi-Fi based socket that works perfectly with Amazon Alexa and Google Assistant by voice control. You can either control it with Android and iOS based APP by phone, anywhere, at any time.
FIOSRACHADH PRODUCT
- Amazon Alexa agus Neach-taic Google co-chòrdail
- Ceangal Wi-Fi a ’faighinn taic
- Bluetooth connection (direct from phone)
- Suidheachadh tìm ri fhaighinn
- Schedule setting available
- Taic ri ùrachadh Firmware OTA
- CE, teisteanas RoHS
- Sgrùdadh lùth
- APP support: iOS 8.0 or Android 4.1 and higher
Earalas sàbhailteachd
Do not open the device. Use the device only for its intended purpose. Do not use the device if it is damaged or defective. In this case, replacement is required. This device is intended for indoor use only. Do not use this device outdoors.
The devices operate only on a stable 2.4GHz Wi-Fi network.
Getting Started
Luchdaich sìos APP agus ceangaltas cunntais
- Scan the QR code on the rear side of this manual to download the APP for Android or iOS system. Or you can download the ‘Caliber smart home’ APP on Apple Store and Google Play.
- Tòisich an APP agus clàraich cunntas leis an t-seòladh post-d / àireamh gluasadach agad agus an uairsin log a-steach leis a ’chunntas clàraichte.
Cuir inneal ris:
- Open Bluetooth on your smartphone.
- Enable Bluetooth and location permission for ‘Caliber Smart Home’ app, so the app can find the device via bluetooth.
- Press and hold the ON/OFF button for 5 seconds to enter the connection mode. The LED indicator will blink rapidly. If the LED indicator flashes slowly, press and hold the POWER button again for 5 seconds until the LED indicator flashes quickly.
- In the Caliber Smart Home app, click on the blue plus [+] in the upper right corner to add a device and select “Power distribution”. Then follow the on-screen instructions which may take approximately 30 seconds.
- When the HWP303U is added, the ON/OFF button can also be used manually to turn on or off the connected device.
Rach gu support.calibereurope.com agus cuir a-steach àireamh a ’mhodail san raon sgrùdaidh gus fiosrachadh a bharrachd a lorg.
Visit our smart home forum where users share their experiences https://support.calibereurope.com/community/
We are constantly improving/updating our products and product information. It is therefore possible that there is a small difference between the description in this manual and the operation of the product. If something is different or not clear, always check our weblàrach airson an dreach as ùire.
Tha na h-ìomhaighean a tha taisbeanach agus faodaidh iad a bhith eadar-dhealaichte a rèir gach inneal agus dreach. Dh ’fhaodadh cuid de dh’ fhaclan san leabhar-làimhe a bhith eadar-dhealaichte bho na dearbh fhaclan a chaidh a chleachdadh san app.
Sgrìobhainnean / Goireasan
 |
CALIBER HWP303U Smart Power Socket [pdf] Leabhar-làimhe neach-cleachdaidh HWP303U, Smart Power Socket, HWP303U Smart Power Socket, Power Socket, Socket |
