Huepar SW-T120 3-in-1 Laser Measurement Tool

1. Ro-ràdh

The Huepar SW-T120 is a versatile 3-in-1 measurement tool designed for various applications in construction, home improvement, and DIY projects. It integrates a laser distance meter, a green cross-line laser level, and a traditional 6.5ft tape measure into a single compact device. This manual provides detailed instructions for safe and effective operation of your device.

Image 1.1: The Huepar SW-T120 device demonstrating its three core functionalities: laser distance measurement, green cross-line laser leveling, and a built-in tape measure.

2. Dè tha sa bhogsa

Dearbhaich gu bheil na pàirtean uile an làthair nuair a dh’fhosglas tu am bogsa:

• 1x Huepar SW-T120 3-in-1 Laser Measuring Tool (400ft/120M)
• 1x Auxiliary Measuring Target Plate
• Càball cosgais 1x Type-C
• 1x Portable Carrying Bag
• 1x Strap-làimhe
• 1x Leabhar-làimhe Cleachdaiche
• 1x Paper Color Box

Image 2.1: All items included in the Huepar SW-T120 product package.

3. Setup agus Cìsean

Before initial use, ensure the device is fully charged. The SW-T120 features a built-in 3.7V / 600mAh Lithium-Ion battery.

1. A' cur cosgais: Connect the provided Type-C charging cable to the device's charging port and a suitable USB power source. The battery indicator on the display will show charging status.
2. Cumhachd air / dheth: Brùth agus cùm an Power ON/Measure putan gus an inneal a thionndadh air no dheth.

Image 3.1: The Type-C charging port and hand strap attachment point on the device.

4. Stiùireadh Obrachaidh

4.1 Tomhas Astar Leusair

This mode allows for precise distance measurements up to 400ft (120m) with an accuracy of ±1/16 inch.

1. Cuir an gnìomh: Brùth an Power ON/Measure putan gus an laser a ghnìomhachadh.
2. Tomhais: Aim the laser at the target point and press the Power ON/Measure button again to take a measurement. The result will be displayed on the screen.
3. Reference Points: The device supports measurements from three reference points: front, rear, or screw-hole. Use the Benchmark/Mode switch putan gus na roghainnean seo a chuairteachadh.

Image 4.1: Understanding the different measurement reference points for accurate readings.

4.2 Green Cross Line Laser Level Mode

The integrated green cross-line laser provides horizontal and vertical lines for leveling and alignment tasks, with a working distance of up to 33ft (10m) and an angle accuracy of ±1°.

1. Cuir an gnìomh: Brùth an Laser Level Mode button to project the green cross lines.
2. Ìre: Place the device on a stable surface. The screen displays angles from -90° to +90° horizontally. If the angle exceeds ±4°, the 'Out' icon will flash, and the laser line will flash rapidly, indicating it is out of level.
3. Mount Tripod: For enhanced stability and precise positioning, the device features a 1/4"-20 tripod mount.

Image 4.2: Using the green cross line laser level for precise alignment.

4.3 Tape Measure

A traditional 6.5ft (2m) physical tape measure is integrated for short-distance measurements or when a laser is not suitable.

• Cleachdadh: Pull out the tape measure from the side of the device. Ensure it retracts smoothly after use.

4.4 Modhan agus Gnìomhan Tomhais

The SW-T120 supports various measurement calculations:

• Tomhas air astar: Single distance measurement.
• Tomhais sgìre: Calculates the area of a surface.
• Tomhais tomhas-lìonaidh: Calculates the volume of a space.
• Indirect Height (Pythagoras): Calculates height using two or three measurements.
• Tomhas leantainneach: A’ toirt seachad ùrachaidhean astar fìor-ùine fhad ‘s a thèid an inneal a ghluasad.
• Cur-ris/Toirt-às: Allows for adding or subtracting measurements.

Dealbh 4.3: Thairisview of the multiple measurement modes available on the device.

4.5 Craoladh Guth

The device features real-time voice feedback for measurements, enhancing readability and efficiency, especially in challenging conditions or for users with limited vision.

• Gnìomhachadh: Brùth fada air an AONAD button to switch between English voice, Chinese voice, or to turn off the sound.
• Thoir an aire: Voice broadcast is not active while the device is charging.

Image 4.4: The voice broadcast feature provides audible measurement readings.

4.6 Data Memory and Units

The device can store up to 100 sets of measurement data, allowing for easy recall without manual notes. It also supports multiple measurement units.

• Sàbhaladh dàta: Valid measurements are automatically saved. The top of the screen indicates how many groups are saved.
• Atharrachadh aonad: Brùth an AONAD button (short press) to cycle through available units: inches (in), feet (ft), meters (m), feet and inches (ft'in"), feet and fractions (ft'in 1/X"), and meters with decimals (m.mm).

Image 4.5: Data memory and unit selection on the device display.

5. Cumail suas agus Cùram

• Glanadh: Cleachd bog, damp clò airson an inneal a ghlanadh. Na cleachd innealan-glanaidh sgrìobach no fuasglaidhean.
• Stòradh: Store the device in its portable carrying bag in a dry, cool place when not in use.
• Seasmhachd: The rugged TPE housing provides resistance against drops, dust, and light water spray (IP54 rated). However, avoid submerging the device in water.

Image 5.1: The device's robust design and accessories for protection and portability.

6. A ’dèanamh trioblaid

• Leughaidhean neo-mhearachdach: Ensure the laser target is clear and unobstructed. Verify the correct reference point (front, rear, screw-hole) is selected. For long distances, use the auxiliary measuring target plate to enhance laser visibility and accuracy.
• Device Shuts Off Unexpectedly: The device has an auto shut-off feature that activates after 150 seconds of inactivity to conserve battery. This setting cannot be changed. Ensure you are actively using the device or restart it if needed.
• Laser Not Visible: In bright light conditions, the green laser line may be less visible. Use the auxiliary measuring target plate to help locate the laser spot.

Image 6.1: The auxiliary target plate helps improve laser visibility and measurement accuracy.

7. Sònrachaidhean

8. Barantas agus Taic

The Huepar SW-T120 laser measuring tool comes with a 2-year quality assurance. Free repair or replacement is provided if the product is found to be faulty under normal use conditions.

For technical support, service inquiries, or warranty claims, please refer to the contact information provided in the product packaging or visit the official Huepar website. Huepar is committed to providing responsive customer service and lifetime technical support.

Image 8.1: Huepar's 2-year quality assurance and service commitment.

9. Bhidio Taisbeanaidh Bathar