KINGrinder P0 Manual Hand Coffee Grinder Instruction Manual

1. Toradh thallview

The KINGrinder P0 is a lightweight manual hand coffee grinder designed for portability and consistent grinding. It features a durable stainless steel conical burr and offers precise grind size adjustments for various brewing methods.

• Dealbhadh aotrom: Constructed from ABS, weighing approximately 330g.
• Comas: Grinds up to 20g of coffee beans at a time.
• Durable Burr: Features a SUS420 stainless steel conical burr, suitable for drip coffee, Moka pot, and French Press.
• Precise Adjustment: Offers 30 clicks per rotation, with each click providing a fine adjustment of 0.0333mm for particle size.
• Cumail suas furasta: Designed for tool-free disassembly and cleaning. A cleaning brush is included.
• So-ghiùlain: Compact size makes it suitable for travel and outdoor activities.

2. Com-pàirtean

The KINGrinder P0 consists of the following main components:

• Corp Grinder: The main housing containing the burr assembly.
• Làimhseachadh: Detachable handle for manual grinding.
• Burr Assembly: Internal stainless steel conical burr for grinding coffee beans.
• Catch Cup: Bottom container for collecting ground coffee.
• Dial Atharrachaidh: Located at the bottom of the burr assembly for setting grind size.
• Sguab glanaidh: Included for maintenance.

3. Suidhich

1. Unpack: Thoir air falbh na pàirtean gu lèir bhon phacaid gu faiceallach.
2. Glanadh tùsail: Before first use, wipe down all parts with a dry cloth or use the included brush to remove any manufacturing dust. The grinder is not designed for wet cleaning.
3. Cruinnich an làmh: Attach the grinding handle to the top shaft of the grinder. Ensure it is securely fitted.
4. Atharraich Meud na Grind: Refer to Section 4.1 for instructions on adjusting the grind size.

4. Obrachadh

4.1 A’ gleusadh meud bleith

The KINGrinder P0 features a stepped adjustment mechanism. To change the grind size:

1. Ensure the catch cup is removed.
2. Locate the adjustment dial at the bottom of the burr assembly.
3. Turn the dial clockwise for a finer grind and counter-clockwise for a coarser grind. Each click represents a 0.0333mm change in particle size. The grinder offers 30 clicks per full rotation.
4. Reattach the catch cup once the desired setting is selected.

4.2 Recommended Grind Settings (Approximate)

The following are approximate starting points for various brewing methods. Fine-tuning may be required based on your specific beans and preference:

• Moka Pot / AeroPress: Approximately 20 clicks from the finest setting.
• Dòirt thairis: Approximately 22-30 clicks from the finest setting.
• Clò na Frainge: Approximately 35-40 clicks from the finest setting.

4.3 Pròiseas Bleith

1. Luchdaich Pònairean: Open the top lid and pour up to 20g of whole coffee beans into the grinder chamber.
2. Ceangail Làimhseachadh: Ensure the handle is securely attached to the grinder shaft.
3. Grid: Hold the grinder body firmly and turn the handle clockwise to begin grinding. Continue until all beans have passed through the burrs.
4. Cruinneachadh Talamh: Unscrew the catch cup from the bottom of the grinder to retrieve your freshly ground coffee.

5. Cumail suas agus Glanadh

Regular cleaning ensures optimal performance and longevity of your KINGrinder P0.

1. Disassembly: The grinder can be easily disassembled without tools. Simply unscrew the catch cup, then carefully remove the burr assembly components.
2. Glanadh: Use the provided cleaning brush to remove any residual coffee grounds from the burrs and internal components. Avoid using water or harsh detergents, as this can damage the burrs and internal mechanisms.
3. A 'tiormachadh: Dèan cinnteach gu bheil na pàirtean uile gu tur tioram mus tèid an ath-chruinneachadh.
4. Ath-chruinneachadh: Reassemble the components in reverse order of disassembly.

6. A ’dèanamh trioblaid

• Dealan Statach: If ground coffee clings to the catch cup due to static, a small amount of water (a single drop) can be added to the whole beans before grinding. This technique, known as the Ross Droplet Technique (RDT), can significantly reduce static.
• Grìosadh neo-chunbhalach: Ensure the adjustment dial is set correctly and securely. If the burr assembly feels loose, re-check the assembly steps.
• Difficulty Grinding: If grinding becomes difficult, check for foreign objects in the burr chamber. Ensure beans are not excessively oily, which can cause clogging.

7. Sònrachaidhean

8. Barantas agus Taic

For information regarding warranty coverage, please refer to the product packaging or the official KINGrinder website. If you encounter any issues or require technical assistance, please contact KINGrinder customer support through their official channels.