Thrustmaster TR J12 USB Adapter Instruction Manual

1. Ro-ràdh

The Thrustmaster TR J12 USB Adapter is designed to enhance the compatibility of your Thrustmaster T3PA and T3PA-PRO 3-pedal pedal sets. This adapter allows these pedal sets to be used on PC with a wide range of racing wheels and PC games that support multi-USB input. It provides high-resolution, high-precision 10-bit performance (1024 values) for each of the three pedals (gas, brake, and clutch).

This manual provides essential information for setting up, operating, and maintaining your TR J12 USB Adapter.

2. Dè tha sa bhogsa

Nuair a dh’fhosglas tu am pasgan, dèan cinnteach gu bheil na pàirtean uile an làthair:

• Thrustmaster TR J12 USB Adapter
• Leabhar-làimhe stiùiridh

Image: The product packaging for the Thrustmaster TR J12 USB Adapter, detailing product information and barcodes.

3. Suidhich

Follow these steps to connect and prepare your TR J12 USB Adapter for use:

1. Connect Pedals to Adapter: Plug your Thrustmaster T3PA or T3PA-PRO 3-pedal set's RJ12 connector into the corresponding port on the TR J12 USB Adapter.
   

   Image: The Thrustmaster TR J12 USB Adapter, showing its RJ12 input and USB-A output connectors.

2. Connect Adapter to PC: Plug the USB-A connector of the TR J12 USB Adapter into an available USB port on your PC.
   

   Image: The underside of the adapter, displaying its model information and regulatory compliance.

3. Stàlaich draibhearan: Download and install the latest PC drivers for the TR J12 USB Adapter from the official Thrustmaster website. These drivers include a customized Windows Control Panel interface for configuration.
4. Calibration Software: For advanced customization, download the Advance Calibration Software from the Thrustmaster website. This software allows you to adjust the dead zones at the beginning and end of each pedal's range of travel.
5. Pedal Mode Switch: If your pedals have a physical switch for "airplane" or "car" mode, ensure it is set to the appropriate mode for your intended use (e.g., "airplane" for rudder pedals, "car" for racing pedals). Incorrect settings can lead to unexpected behavior.

4. Stiùireadh Obrachaidh

Once the adapter and pedals are connected and drivers are installed, your pedal set should be recognized by your PC and compatible games.

• Co-fhreagarrachd geama: The adapter is compatible with all PC games that support multi-USB devices. Ensure your game settings are configured to use the pedal set.
• Cruinneas: Benefit from the high-resolution, 10-bit precision (1024 values) on each pedal for accurate control in simulations.
• Gnàthachadh: Use the Windows Control Panel interface (installed with drivers) or the Advance Calibration Software to fine-tune pedal response, including dead zones, to match your preference.

5. Cumail suas

To ensure the longevity and optimal performance of your TR J12 USB Adapter:

• Cùm an inneal-atharrachaidh glan agus saor bho dhuslach. Cleachd clò bog, tioram airson a ghlanadh.
• Seachain an inneal-atharrachaidh a nochdadh do theodhachd no taiseachd anabarrach.
• Do not attempt to open or modify the adapter, as this will void the warranty.
• Stòraich an inneal-atharrachaidh ann an àite sàbhailte nuair nach eilear ga chleachdadh gus casg a chur air milleadh corporra.

6. A ’dèanamh trioblaid

If you encounter issues with your TR J12 USB Adapter, consider the following:

• Adaptair gun aithneachadh:
  • Ensure the adapter is securely plugged into a functional USB port on your PC.
  • Verify that the pedal set is correctly connected to the adapter.
  • Check if the latest drivers from the Thrustmaster weblàrach air a stàladh.
  • Feuch port USB eadar-dhealaichte air a’ PC agad.
• Pedals Not Responding in Game:
  • Confirm that the game's control settings are configured to use the pedal set.
  • Open the Windows Control Panel interface for the adapter to check if the pedals are registering input.
  • If your pedals have a mode switch (e.g., "airplane" or "car"), ensure it is set correctly for the game you are playing.
• Incorrect Pedal Response (e.g., dead zones):
  • Use the Advance Calibration Software to adjust pedal dead zones and sensitivity.

7. Sònrachaidhean

8. Barantas

This product is covered by a one-year warranty. For detailed warranty terms and conditions, please refer to the official Thrustmaster weblàrach-lìn no cuir fios gu taic teachdaiche.

9. Taic

For further assistance, technical support, driver downloads, or calibration software, please visit the official Thrustmaster weblàrach:

www.thrustmaster.com

You can also find additional resources and FAQs on the Thrustmaster support pages.