1. Ro-ràdh
Thank you for choosing the Einhell TH-MS 2513 T Miter and Table Saw. This versatile power tool is designed for precise cutting of wood, plastic, and non-ferrous metals, offering both miter saw and table saw functionalities. This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your saw. Please read these instructions carefully before first use and keep them for future reference.
Figear 1: Os a chionnview of the Einhell TH-MS 2513 T Miter and Table Saw.
2. Stiùireadh Sàbhailteachd
Cùm na ceumannan sàbhailteachd a leanas an-còmhnaidh gus casg a chur air clisgeadh dealain, teine agus leòn dona:
- Leugh an leabhar-làimhe gu lèir: Understand all instructions and warnings before operating the saw.
- Cuir ort uidheam dìon pearsanta (PPE): Always wear safety glasses, hearing protection, and a dust mask. Use gloves when handling saw blades.
- Cùm an raon obrach glan agus air a dheagh shoillseachadh: Bidh raointean cluttered no dorcha a’ toirt cuireadh do thubaistean.
- Na obraich ann an àile spreadhaidh: Na cleachd innealan cumhachd ann an làthair lionntan, gasaichean no duslach lasanta.
- Obair-obrach tèarainte: An-còmhnaidh clamp or hold the workpiece firmly to prevent movement during cutting.
- Use correct blade: Ensure the saw blade is sharp, clean, and suitable for the material being cut. Never use damaged or dull blades.
- Cùm bunait agus cothromachadh ceart: Na gabh thairis air.
- Dì-cheangail cumhachd: Always unplug the saw before making adjustments, changing accessories, or performing maintenance.
- Cùm geàrdan nan àite: Na cleachd an sàbh gu bràth mura h-eil na dìonan uile air an stàladh gu ceart agus ag obair gu ceart.
- Seachain tòiseachadh gun fhiosta: Dèan cinnteach gu bheil an suidse dheth mus cuir thu an inneal a-steach.
3. Suidhich
3.1 Unpacking agus Sgrùdadh
Carefully remove all components from the packaging. Inspect the saw for any damage that may have occurred during shipping. Do not operate the saw if any parts are damaged or missing. Contact customer support immediately.
3.2 Seanadh
The Einhell TH-MS 2513 T requires minimal assembly. Ensure all included components, such as the push stick and any necessary guards, are properly attached according to the diagrams in the separate assembly guide (if provided). The work table is made of lightweight and stable cast aluminum, designed for precise work.
3.3 Stàladh Lann-sàbhaidh
- Dì-cheangail cumhachd: Dèan cinnteach gu bheil an t-sàbh air a dhì-phlugachadh bhon stòr cumhachd.
- Open blade guard: Carefully lift or open the blade guard to access the blade arbor.
- Stàlaich an lann: Place the saw blade (Ø 250 x Ø 30 x 2.8 mm, 36 teeth) onto the arbor, ensuring the rotation direction indicated on the blade matches the arrow on the saw.
- Lann tèarainte: Fasten the blade with the provided washer and arbor nut, tightening securely.
- Close guard: Return the blade guard to its original position.
Figure 2: Saw blade and protective guard in miter saw configuration.
4. Stiùireadh Obrachaidh
4.1 Obrachadh Coitcheann
Before starting, ensure your workpiece is stable and properly supported. Always allow the blade to reach full speed before beginning a cut. Feed the material slowly and steadily. Never force the saw.
4.2 Miter Saw Function
The miter saw function allows for precise cross-cuts and miter cuts. Adjust the miter angle by loosening the locking knob, setting the desired angle (-45°/0°/+45°), and re-tightening the knob. For bevel cuts, adjust the saw head tilt. Ensure the workpiece is firmly against the fence.
- Comas gearraidh aig 90 °: 130 x 75 mm
- Comas gearraidh aig 45 °: 120 x 50 mm
- Cutting Capacity at 2 x 45° (Compound Miter): 70 x 35 mm
Figure 3: Adjusting the miter angle for precise cuts.
4.3 Table Saw Function
To use the saw as a table saw, lock the saw head in the upright position. Adjust the cutting height (0–40 mm) using the height adjustment mechanism. Use the parallel fence for rip cuts and the push stick for feeding smaller workpieces. The table surface measures 416 x 352 mm.
Figure 4: Adjusting the cutting height for table saw operation.
4.4 Dust Extraction
The saw is equipped with a dust funnel behind the saw blade for improved sawdust collection. Connect a suitable dust extractor to the dust port to maintain a clean work environment and improve visibility during operation.
Figure 5: Dust extraction port for connecting a vacuum system.
5. Cumail suas
Bidh cumail suas cunbhalach a’ dèanamh cinnteach gum mair an sàbh agad fad-beatha agus gum bi e ag obair gu sàbhailte.
- Glanadh: After each use, disconnect the saw from power and clean off sawdust and debris using a brush or compressed air. Do not use solvents that could damage plastic parts.
- Sgrùdadh lann: Dèan sgrùdadh cunbhalach air lann an t-sàbhaidh airson geur-leanmhainn, sgàinidhean, no fiaclan a dhìth. Cuir lannan maol no millte nan àite sa bhad.
- Gnìomhachd an Dìonadair: Ensure all guards move freely and return to their protective positions.
- Lubrication: Apply a light coat of machine oil to moving parts as recommended in the full manual (if applicable).
- Corda cumhachd: Check the power cord for damage. Do not use the saw if the cord is frayed or cut.
6. A ’dèanamh trioblaid
Tha an earrann seo a’ dèiligeadh ri cùisean cumanta a dh’ fhaodadh tu a thighinn tarsainn orra. Airson duilgheadasan nach eil air an liostadh an seo, cuir fios gu taic luchd-cleachdaidh.
| Trioblaid | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Chan eil sàbh a’ tòiseachadh | No power supply; faulty switch; thermal overload activated. | Check power connection; test switch; allow motor to cool down. |
| Droch chàileachd gearraidh / Fiodh a’ losgadh | Dull or dirty blade; incorrect blade for material; feeding too fast. | Replace or clean blade; use appropriate blade; reduce feed rate. |
| Crathadh cus | Lann sgaoilte; lann millte; suidheachadh neo-sheasmhach. | Tighten blade nut; replace blade; ensure saw is securely mounted. |
| Tarraing duslach neo-èifeachdach | Dust port clogged; dust extractor not powerful enough; hose disconnected. | Clear dust port; use a more powerful extractor; check hose connections. |
7. Sònrachaidhean Teicnigeach
| Sònrachadh | Luach |
|---|---|
| Modail Àireamh | 4300345 |
| Cuir a-steach cumhachd | 1800 W |
| Luas gun luchdachadh | 4500 mionaid-1 |
| Saw Blade Dimensions | Ø 250 x Ø 30 x 2.8 mm |
| Àireamh nam Fiaclan | 36 |
| Atharrachadh Ceàrn Miter | -45 ° / 0 ° / +45 ° |
| Cutting Width at 90° | 130 x 75 mm |
| Cutting Width at 45° | 120 x 50 mm |
| Cutting Width at 2 x 45° | 70 x 35 mm |
| Table Saw Surface | 416 x 352 mm |
| Table Saw Cutting Height | 0-40 mm |
| Voltage | 230 v |
| Cuideam nì | 14 kg |
| Meudan toraidh (L x W x H) | 54.5 x 47 x 37.5 cm |
| An uachdar a thathar a ’moladh | Fiodh, meatailt, plastaig |
8. Barantas agus Taic
8.1 Barantas
This Einhell product comes with a Barantas 2-bliadhna from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in material and workmanship under normal use. It does not cover damage caused by misuse, abuse, unauthorized repairs, or normal wear and tear.
8.2 Taic teachdaiche
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer support. You can find contact information on the official Einhell weblàrach-lìn no tron neach-reic ionadail agad.
Weblàrach: www.einhell.com
Please have your model number (4300345) and serial number (if applicable) ready when contacting support.