Doiciméad

OWLLON TNS-0117 Dobe Wireless Gamepad Do Nintendo Switch Pro Rialaitheoir Lámhleabhar
OWLLON TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller

Réamhrá Táirgthe:

This controller is of Bluetooth wireless type, which is mainly used with N-S console. The aisle light of the controller is assigned through the console. This product is available in motor vibration and sensor functions, and it supports the connection to PC console via USB so as to achieve PC XINPUT function

Léaráid Táirgí:

Léaráid Táirgí
Léaráid Táirgí

Léaráid Feidhme:

Ainm Feidhm Is there a function? Nótaí
Nasc sreangaithe USB Is ea  
Nasc Bluetooth Tacaíocht  
mód ceangal N-S PC mode  
Six-axis gravity induction Is ea  
Eochair Is ea  
B eochair Is ea  
X eochair Is ea  
Y eochair Is ea  
- eochair Is ea  
+ eochair Is ea  
L eochair Is ea  
R eochair Is ea  
Eochracha ZL Is ea  
Eochracha ZR Is ea  
Eochair bhaile Is ea  
Print Screen key function Is ea  
Luamhán stiúrtha 3D (feidhm luamhán stiúrtha 3D ar chlé) Is ea  
Eochair L3 (feidhm cnaipe luamhán stiúrtha 3D ar chlé) Is ea  
R3 key (right 3D joystick press key function) Is ea  
Cross key function Is ea  
TUBRO speed regulation function Is ea  
Connecting indicators Is ea  
Motor vibration intensity adjustment Is ea  
Uasghrádú rialtóir Tacaíocht  

Mode and Pairing Instruction:

  • 1. N-S wired connection mode:
    1. Before use the wired connection, please confirm the N-S console system: “set up” -> “controller and inductor” -> “wired connection of Pro controller” in “on” state.
    2. The controller is connected to the N-S base via USB cable so as to be used as the wired controller, and the corresponding indicator light of the controller will flash slowly; when you plug out the USB cable, the controller turns into wireless mode and connect the console automatically!
  • 2. N-S wireless connection mode:
    1. Before use the wireless connection, please confirm that the N-S console system turns to: “controller” -> “ change grip/order” in pairing state.
    2. Long press the code key of the controller for 3 seconds to enter into Bluetooth search mode, and the LED indicator light will flash in marquee type.
      The corresponding channel indicator light will be on after successful connection.
  • 3. PC-360, PC mode:
    Firstly, please download the PC 360 to Windows computer. After the PC 360 is installed, the controller should be connected to the computer via USB cable, and the corresponding channel indicator light will be on after successful connection. The LED2 and LED3 will be on when the No.1 and No.10 keys are pressed simultaneously to switch to PC mode.
  • 4. Back connection and shutdown instruction:
    1. Short press the Bluetooth code key to shutdown the controller.
    2. Press Home to wake up the controller. The awakened controller will automatically back connect the console which has been paired previously; it will switch to auto sleep if the back connection is not successful within 8 seconds.

Tásc Muirir agus Tréithe Muirir:

During the charging of the controller: the charging LED indicator light will be on, and it will be off after the controller is fully charged.

Codladh Auto:

  • Connect N-S mode: the N-S console screen is off or shut down, and the controller automatically disconnects and switch to sleep mode.
  • Bluetooth connection mode: the Bluetooth disconnects and switches to sleep mode after the Bluetooth code key is pressed shortly.
  • Without any keys pressed within 5 min, it will switch to auto sleep mode (including gravitational induction immobility). Remarks: there is no auto sleep currently

TURBO Function Settings:

  • Socrú feidhm TURBO leath-uathoibríoch: brúigh an eochair TURBO agus ansin é a shocrú mar eochair feidhme TURBO de réir mar is gá, ansin is féidir leat na socruithe a chomhlánú go rathúil.
  • Full-automatic TURBO function setting: press TURBO key and then press the key which has been set up with the semi-automatic TURBO function.
  • Keys available for TURBO function settings: A key, B key, X key, Y key, + key, – key, L key, R key, ZL key, ZR key, “cross” key (up, down, left and right), L3 key (left 3D joystick press key) and R3 (right 3D joystick press key).
  • Glan na heochracha feidhme TURBO atá socraithe:
    • Clear TURBO function of single key: press TURBO key + key set up with TURBO function for quick clear.
    • Shut down the automatic firing function: you should short press the – key and down arrow key once, and the controller will vibrate once to execute the command, then the automatic firing function of all keys will be turned off.
  • Regulation methods of automatic firing speed:
    • A. Increase automatic firing speed: short press T key and up arrow key once, and the controller will vibrate once to execute the command, which means that the automatic firing speed has been up regulated by one gear successfully.
    • B. Reduce automatic firing speed: short press T key and up arrow key once, and the controller will vibrate once to execute the command, which means that the automatic firing speed has been down regulated by one gear successfully.
    • C. The automatic firing function is memorable. If the console is connected after the controller is disconnected, the automatic firing speed set up previously can be memorized.

Motor Vibration Regulation:

3 gears in total: weak, intermediate and strong (the changed amplitude is 40%, 70% and 100%) regulation methods:

  • Lowest gear (40% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • Intermediate gear (70% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • Top gear (100% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • The intermediate gear of controller vibration is acquiescently connected for the first time, i.e. 70% ampéadrom.

Feidhm Nasc USB:

  • The wired N-S and PC XINPUT mode connection is supported.
  • It is automatically identified as N-S mode when connected to N-S console.
  • It is in XINPUT mode when connected to PC.

Paraiméadair Leictreacha:

Mír Luach tagartha
Ag obair voltage DC 3.6-4.2V
Ag obair faoi láthair 24mA
Codladh reatha 22.5uA
Reatha creathadh 82 mA~130 mA
Ionchur chumhacht DC 4.5~5.5V/400mA
cumas Battery 500mAh
Achar oibríochta 10m

3D Joystick Instruction:

  • The 3D joystick is not required to be calibrated manually on N-S console. The 3D joystick will be calibrated automatically when the N-S console is plugged.
  • If the 3D joystick drips during use, please replug and unplug the controller before use. Be careful not to touch the 3D joystick when you plug and unplug the controller.

Gyroscope Calibration Instruction:

Enter into the “N-S console setting – controller and inductor – calibration of gyroscope inductor” for controller test and calibration; place the controller horizontally on the desktop and long press + or – for calibration.

Controller Upgrade Instruction:

  • If this product cannot be used due to system compatibility and other reasons, please contact the customer service provider to provide program: install the upgrade package to upgrade.
  • Specific operation: plug the controller into the computer first, then press the X+Y+HOME for 3 sec to enter into the upgrade mode; and then open the Program.exe software, click update firmware to upgrade, and wait for the prompt for successful update.

Cúrsaí a bhfuil aird ag teastáil uathu:

  • Ba cheart an táirge seo a choinneáil go maith nuair nach bhfuil sé in úsáid.
  • Ní féidir an táirge seo a úsáid agus a stóráil i dtimpeallacht tais.
  • Ba cheart an táirge seo a úsáid nó a stóráil trí dheannach agus ualaí trom a sheachaint chun a shaol seirbhíse a ráthú.
  • Ná húsáid le do thoil an táirge atá sáithithe, tuairte nó briste agus a bhfuil fadhbanna feidhmíochta leictrigh de bharr úsáid mhíchuí aige.
  • Ná húsáid trealamh teasa seachtrach mar oighinn micreathonn le haghaidh triomú.
  • Má dhéantar damáiste dó, seol chuig an roinn cothabhála é le diúscairt. Ná disassemble é leat féin.
  • Úsáidfidh úsáideoirí leanaí an táirge seo i gceart faoi threoir na dtuismitheoirí, agus ní bheidh siad tugtha don chluiche.

Rabhadh FCC :

Comhlíonann an gléas seo cuid 15 de Rialacha FCC. Tá an oibríocht faoi réir an dá choinníoll seo a leanas:

  1. Ní fhéadfaidh an gléas seo cur isteach díobhálach a dhéanamh, agus
  2. caithfidh an gléas seo glacadh le haon chur isteach a fhaightear, lena n-áirítear cur isteach a d’fhéadfadh a bheith ina chúis le hoibriú neamh-inmhianaithe.

D’fhéadfadh aon athruithe nó modhnuithe nach gceadaíonn an páirtí atá freagrach as comhlíonadh go sainráite údarás an úsáideora an trealamh a oibriú a chur ar neamhní.

Nóta: Tástáladh an trealamh seo agus fuarthas go gcomhlíonann sé na teorainneacha le haghaidh feiste dhigitigh Aicme B, de bhun chuid 15 de Rialacha FCC. Tá na teorainneacha seo deartha chun cosaint réasúnach a sholáthar ar chur isteach díobhálach i suiteáil chónaithe.
Gineann an trealamh seo úsáidí agus féadann sé fuinneamh minicíochta raidió a radaíocht agus, mura ndéantar é a shuiteáil agus a úsáid de réir na dtreoracha, d’fhéadfadh sé cur isteach díobhálach a dhéanamh ar chumarsáid raidió. Mar sin féin, níl aon ráthaíocht ann nach dtarlóidh cur isteach i suiteáil áirithe. Má chuireann an trealamh seo isteach go díobhálach ar fháiltiú raidió nó teilifíse, ar féidir é a chinneadh tríd an trealamh a chasadh air agus air, spreagtar an t-úsáideoir chun iarracht a dhéanamh an cur isteach a cheartú le ceann amháin nó níos mó de na bearta seo a leanas:

  • An t-aeróg glactha a atreorú nó a athlonnú.
  • An deighilt idir an trealamh agus an glacadóir a mhéadú.
  • Ceangail an trealamh le asraon ar chiorcad atá difriúil ón trealamh lena bhfuil an glacadóir ceangailte.
  • Téigh i gcomhairle leis an déileálaí nó le teicneoir raidió / teilifíse a bhfuil taithí aige chun cabhair a fháil.

Rinneadh an fheiste a mheas chun riachtanas ginearálta nochta RF a chomhlíonadh. Is féidir an gléas a úsáid i riocht nochta iniompartha gan srian.

Doiciméid / Acmhainní

OWLLON TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller [pdf] Lámhleabhar Úsáideora
TNS-0117, TNS0117, 2AJJCTNS-0117, 2AJJCTNS0117, TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller, TNS-0117, Dobe Wireless Gamepad For Nintendo Switch Pro Controller

Fág tagairt

Nach mbeidh do sheoladh r-phoist a fhoilsiú.