GL-iNet-lógó

KVM Cianda Foinse Oscailte GL iNet FGB-01

GL-iNet-FGB-01-Open-Source-Remote-KVM-product

Cuirimis tús leis

Cabhair uait? Scan an cód QR le haghaidh ranganna teagaisc físeán agus treoir úsáideora.GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-1

ÁBHAR PACÁISTE

GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-2

A CHOINNEÁIL

  1. Bain an cluaisín leithlisithe ceallraí plaisteacha. GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-3
  2. Remove the cover from the notch on 1he side of the device. GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-4
  3. Take out the USB dongle. (FGB-01-D) GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-5
  4. Insert the USB dongle into the Comet {GL-RM1 ). GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-6
  5. The FingerBot can be controlled through the GLKVM app7GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-6

SUITEÁIL

  1. Clean the surface of the device before Installation.
  2. Peel off the protective sticker from 1he adhesive on the bottom of the FingerBolt.
  3. Stick the FingerBat near the control button of 1he device. GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-7
  4. Testing pressure levels
    The FingerBot features two different pressing levels. You can adjust the level at any time through the GLKVM App.
    1. Light Press Mode: Use for shorter keys.
    2. Hird Press Mada: Use for longer key.GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-11
  5. Operation made
    • The FlngerBot features two different operation modes.. You can adjust the modes at any time through the GLKVM App.
    • Press Mode: Pressing the button or controlling one-way switches. Ideal for tasks like powering on a PC.GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-8
  6. lnstallallan an the laplap
    Nóta:
    Only for laptops with edge-mounted power buttons.
    1. Secure the bracket in the desired position and tighten it.
    2. Attach the FingerBot to the bracket and test its alignment.GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-9
  7. Tesl button
    Use the test button to find your preferred pressing level:
    1. First press – FingerBot extends to Light Press.
    2. Second press – FlngerBot extends to Hard Press.
    3. Third press – FingerBot retracts.GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-10

ATHCHÓIR CATHAIR

How ta replaC41 your battery;

  1. Ullmhaigh ceallraí CR2.
  2. Remove the cowr from 1he notch on the side of the device.
  3. Cuir an ceallraí in ionad.
  4. Put the cover back on the device

TACAÍOCHT

Set up video and FAQs
Le haghaidh Treoracha níos mionsonraithe agus nuashonraithe, tabhair cuairt ar ár websuíomh

BARÁNTA

  • We provide a two-year limited warranty for the product and a 3-month limited warranty for accessories.
  • An extra warranty may apply according to the local law in which the product purchase took place.
  • Any damage to the caused by not following the instructions will render this warranty null and void.
  • Any damage to the product caused by modifying the PCBA, components, or case will render this warranty null and void.
  • Seans nach bhfaighidh saincheisteanna a eascraíonn as úsáid firmware tríú páirtí tacaíocht oifigiúil uainn.
  • Any damage to the product caused by inappropriate use, e.g., inappropriate voltage input, high temperature, dropping in the water or on the ground, will render this warranty null and void.
  • Pictures in the instructions are only for reference. We reserve the right to change or modify these materials without further notice.

Oifig Hong Cong
GL Technologies (Hong Kong) Aonad Teoranta 601, Foirgneamh 5W, Páirc Eolaíochta Hong Cong, Shatin, NT, Hong Cong

Oifig Shenzhen
Shenzhen Guanglianzhitong Tech Co., Ltd Seomra 305 – 306, Foirgneamh Digiteach Skyworth, Sráid Shiyan, Dúiche Baoan, Shenzhen, an tSín, 518000 (+86-0755-86606126 )

Rabhadh CCFG

Chun comhlíonadh leanúnach a chinntiú, aon athruithe nó modhnuithe nach bhfuil ceadaithe go sainráite ag an bpáirtí. D’fhéadfadh údarás an úsáideora an trealamh seo a oibriú a chur ar neamhní a bheadh ​​freagrach as comhlíonadh.

Ráiteas CCFG
Comhlíonann an trealamh seo Cuid 15 de Rialacha CCFG. Tá an oibríocht faoi réir an dá choinníoll seo a leanas:

  1. Ní fhéadfaidh an gléas seo a bheith ina chúis le cur isteach díobhálach, agus
  2. Ní mór don ghléas seo glacadh le haon chur isteach a fhaightear, lena n-áirítear cur isteach a d’fhéadfadh oibriú gan iarraidh a chruthú.

NÓTA: Tástáladh an trealamh seo agus fuarthas amach go gcomhlíonann sé na teorainneacha le haghaidh feiste digiteach Aicme B, de bhun chuid 15 de rialacha CCFG. Tá na teorainneacha seo deartha chun cosaint réasúnta a sholáthar ar chur isteach díobhálach i suiteáil chónaithe. Gineann, úsáideann agus féadann an trealamh seo fuinneamh radaimhinicíochta a ghathú agus, mura ndéantar é a shuiteáil agus a úsáid de réir na dtreoracha, féadfaidh sé cur isteach díobhálach a chur ar chumarsáid raidió. Mar sin féin, níl aon ráthaíocht ann nach gcuirfear isteach ar shuiteáil áirithe. Má chuireann an trealamh seo isteach go díobhálach ar fáiltiú raidió nó teilifíse, ar féidir a chinneadh tríd an trealamh a mhúchadh agus a chur ar siúl, moltar don úsáideoir iarracht a dhéanamh an cur isteach a cheartú trí cheann amháin nó níos mó de na bearta seo a leanas:

  • Atreoraigh nó athlonnaigh an t-aeróg glactha.
  • Méadú ar an scaradh idir an trealamh agus glacadóir.
  • Ceangail an trealamh isteach in asraon ar chiorcad atá difriúil ón gceann a bhfuil an glacadóir nasctha leis.
  • Téigh i gcomhairle leis an díoltóir nó le teicneoir raidió/teilifíse a bhfuil taithí aige/aici chun cabhair a fháil.

Ráiteas Nochtadh Radaíochta FCC
The equipment complies with the FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. EU Declaration of Conformity Hereby, GL Technologies (Hong Kong) Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53 /EU and 2011/65/EU. A copy of the EU Declaration of Conformity (DoC) is available online at https://www.gl-inet.com/products/certificate.

AIRE
Riosca dóiteáin nó pléasctha má chuirtear ceallraí eile in ionad an cheallraí den chineál mícheart.

  • Cineál mícheart a chur in ionad cadhnra a d’fhéadfadh cosaint a shárú (le haghaidh seanample, i gcás roinnt cineálacha ceallraí litiam).
  • Ceallraí a dhiúscairt i dtine nó in oigheann te, nó ceallra a bhrú nó a ghearradh go meicniúil, ar féidir pléascadh a bheith mar thoradh air.
  • Ceallraí a fhágáil i dtimpeallacht teocht an-ard máguaird a bhféadfadh pléascadh nó sceitheadh ​​leacht nó gáis inadhainte a bheith mar thoradh air; agus
  • Ceallra faoi bhrú an-íseal aeir a d’fhéadfadh pléascadh nó sceitheadh ​​leachta nó gáis inadhainte a bheith mar thoradh air.

Doiciméid / Acmhainní

KVM Cianda Foinse Oscailte GL iNet FGB-01 [pdfLámhleabhar Úsáideora
FGB01D, 2AFIW-FGB01D, 2AFIWFGB01D, KVM Cianda Foinse Oscailte FGB-01, FGB-01, KVM Cianda Foinse Oscailte, KVM Cianda Foinse, KVM Cianda, KVM

Tagairtí

Fág trácht

Ní fhoilseofar do sheoladh ríomhphoist. Tá réimsí riachtanacha marcáilte *