Cecotec Power Black Titanium 1800MAX Wizard & Wizard Go Blender

Safety Instructions

General Warnings:

• Read these instructions thoroughly before using the device. Keep this manual for future reference or new users.
• All safety instructions must be closely followed when using the appliance.
• Check the power cable regularly for visible damage. If damaged, it must be replaced by the manufacturer, their after-sales service, or similarly qualified personnel to avoid risks.
• WARNING: Incorrect or improper use can be dangerous for the user and damage the appliance. Use only for purposes described in this manual.
• Handle blender blades with care, especially when changing accessories, cleaning, or emptying the jug.
• Turn off and unplug the appliance before changing accessories or moving parts.
• Always unplug if left unattended and before assembly, disassembly, or cleaning.
• This appliance is not intended for use by children. Keep it and its cord out of their reach.
• Persons with reduced physical, sensory, or mental capabilities, or lack of experience/knowledge, can use it if supervised or instructed on safe use and hazards.
• Children must not play with the device.
• Designed for domestic use only; excluded from bars, restaurants, farms, hotels, motels, and offices.
• Ensure mains voltage matches product marking and wall outlet is grounded.
• Do not immerse cable, plug, or any non-removable part in water or other liquid. Keep electrical connections dry. Ensure hands are dry before handling the plug or switching on.
• Do not use if cable, plug, or housing is damaged, or if it malfunctions, has been dropped, or damaged.
• Do not twist, bend, pull, or damage the power cable. Protect from sharp edges and heat sources. Keep away from hot surfaces. Do not let the cable hang over edges.
• Not designed for operation via timers or external remote-control systems.
• Turn off and unplug when not in use and before cleaning. Pull the plug, not the cable.
• Do not use non-Cecotec accessories; they could cause damage or injury.
• Place on a dry, stable, flat, heat-resistant surface.
• Do not attempt self-repair. Contact Cecotec Technical Support for advice.
• For correct operation, cleaning, and maintenance must follow this manual. Turn off and unplug before moving or cleaning.
• Cleaning and maintenance must not be carried out by children.
• Do not wash the main body in the dishwasher.
• Do not use with hard foods (bones, shelled nuts, frozen meats) as it could damage blades or motor.
• Do not process hot foods or boiling liquids. Let them cool first.
• No liability accepted for damage/injuries from misuse or non-compliance with this manual.

Before Use

The appliance is packaged to protect it during transport. Remove from box and all packaging materials. Keep original box for future transport needs. Recycle packaging materials properly.

Ensure all parts and components are included and in good condition. Contact Cecotec Technical Support immediately if any are missing or damaged.

Box Content:

• Blender
• Transportable cup (only included in reference 03906_Power Black Titanium 1800MAX Wizard Go)
• Instruction manual

Operation

General Operation:

1. Pour ingredients and cover the jug. Place jug in the main body. (Refer to Fig. 2)
2. Plug the appliance into a power supply.
3. Turn the speed knob to set desired speed:
   • Turn left (counterclockwise) for PULSE mode.
   • Turn right (clockwise) for speed settings 1-4.
4. At the end of preparation, turn speed knob to 0, switch off, and wait for blades to stop completely.
5. Remove jug and lid, then pour ingredients.
6. Do not use the blender continuously for more than 2 minutes. Allow 20 minutes cooling time between uses if the motor overheats.

Ice Crushing:

Recommended to use the "Pulse" function at maximum power and add a little water with the ice.

Cleaning and Maintenance

General Cleaning:

• Before cleaning, switch off and unplug the appliance.
• Be careful with the sharp blades.
• Regular cleaning and removal of food residues are advisable.
• Improper cleaning/maintenance can deteriorate the surface, affecting lifespan and causing hazards.
• Dishwasher-safe parts: jug, jug lid, measuring cup.

Cleaning Procedure:

1. Rinse jug with water. Fill with 400ml lukewarm water and a little detergent. Close jug with lid and run in PULSE mode for 2 seconds at a time, repeating as needed.
2. After cleaning, turn speed knob to "0", switch off, and unplug after each use and before cleaning.
3. Clean jug with water. Do not use abrasive or chemical cleaners.
4. Never submerge motor base or blade holder in water.
5. Clean motor base with a soft, dry cloth. Do not use a wet cloth.

Maintenance:

• If the product malfunctions, makes unusual noises, or vibrates excessively, stop use and contact Cecotec Technical Support.
• Do not attempt self-repair.

Storage:

• After cleaning, ensure the appliance is thoroughly dried before storing.
• Store in a dry, safe place.
• Avoid direct sunlight.
• Store out of reach of children.

Technical Specifications

• Product reference: 04382/03906
• Product: Power Black Titanium 1800MAX Wizard / Power Black Titanium 1800MAX Wizard Go
• Voltage: 220 - 240 V~
• Frequency: 50 - 60 Hz
• Power: 1250 W
• Maximum locked motor power: 1800 W
• Specifications are subject to change without prior notice to improve quality.
• Made in China | Designed in Spain

Disposal of Old Electrical and Electronic Appliances

This symbol indicates separate disposal of product/batteries from household waste, according to applicable regulations. At end-of-life, remove batteries/accumulators and take to a designated local collection point. Contact local authorities or retailer for detailed disposal information. Compliance helps protect the environment.

Technical Support and Warranty

Cecotec is liable for conformity defects at the time of delivery, as per applicable regulations.

Repairs should be carried out by qualified personnel.

For any product issues or queries, contact Cecotec Technical Support at +34 963 210 728.

Copyright

Intellectual property rights for this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. Reproduction, storage, transmission, or distribution of this publication in whole or in part, by any means, requires prior authorization from CECOTEC INNOVACIONES, S.L.

Diagram Descriptions

Fig./Img./Abb./Afb./ Rys. 1: Parts and Components

This diagram shows the main parts of the blender. It labels:

• 1. Measuring cup
• 2. Lid
• 3. Glass jug
• 4. Main body
• 5. Speed knob
• 6. Rubber feet
• 7. Transportable cup (included with specific models)

Fig./Img./Abb./Afb./ Rys. 2: Operation Steps

This diagram illustrates the process of placing the jug onto the main body of the blender.