Zkoee Orp02 True Wireless Earphones Instruction Manual

Product Overview

This manual provides instructions for the Zkoee Orp02 True Wireless Earphones. Please read it carefully before use and keep it for future reference.

1. Product Diagram

The Zkoee Orp02 earphones feature a touch-sensitive area and a microphone on each earphone.

Music Mode Controls:

• Touch Area (Left/Right Earphone): Play/Pause (single tap).
• Right Earphone: Next Song (double tap).
• Left Earphone: Previous Song (double tap).
• Right Earphone: Volume Up (triple tap).
• Left Earphone: Volume Down (triple tap).
• Left/Right Earphone: Activate Voice Assistant (Siri) (long press for 3 seconds until beep).
• Left/Right Earphone: Power Off (long press for 5 seconds).

Phone Mode Controls:

• Touch Area (Left/Right Earphone): Answer/Hang Up Call (single tap).
• Left/Right Earphone: Reject Call (long press).

2. Product Operation

First Use:

1. Open the charging case.
2. Pairing Mode: The earphones enter pairing mode automatically.
3. Charging: Place earphones in the charging box. The indicator light flashes and turns off when fully charged. Charge the charging box using the provided cable; the display shows 100% when fully charged.
4. Power Off: Place earphones back into the charging box and close the cover.

Attention: If pairing is not completed within 5 minutes, the earphones will automatically power off. They have a memory function and will automatically reconnect to the phone upon subsequent power-on.

3. FAQs

Q1: Why can't the wireless earphones be searched or is the sound stuck?

A1:

• Ensure you are within 10 meters of your mobile phone and avoid obstructions like walls.
• Your area might have electromagnetic interference. Move away from potential interference sources.

Q2: Why is the touch insensitive?

A2:

• Ensure your fingers are dry and free of foreign matter when touching the earphones.
• Confirm you are touching the correct area and performing the control actions promptly.

Q3: Why can't the product reconnect?

A3:

• If the earphones exceed the 10-meter connection range, they disconnect. If they don't return within 5 minutes, they power off.
• If reconnection fails after 5 minutes, place the earphones back in the charging box, close the cover, and then take them out again.

Q4: Why is there no sound on one side?

A4:

• Place the earphone back into the charging box, close the cover, and then take it out again.
• If the above fails, turn off Bluetooth on your phone and reconnect.
• If the issue persists, contact your local retailer.

4. Safety Precautions

Important Tips:

Handle Zkoee Wireless Earphones with care as they contain sensitive electronic components, including batteries. Avoid dropping, burning, squeezing, disassembling, or puncturing them, as this can cause damage or injury. Do not use damaged earphones.

Battery:

Do not attempt to replace the battery yourself. This could lead to damage, overheating, or personal injury.

Prolonged Heat Exposure:

Avoid prolonged contact with charging earphones to prevent discomfort or injury. Do not sit or sleep on the earphone case, charging cable, plug, power adapter, or place them under blankets, pillows, or your body.

Hearing Impairment:

Do not listen to music at high volumes for extended periods to prevent hearing damage.

Medical Equipment Interference:

The earphones contain components and radio devices that emit electromagnetic fields and magnets. These may interfere with pacemakers, defibrillators, or other medical devices. Consult your doctor or medical device manufacturer for guidance on maintaining a safe distance.

Asphyxiation Hazard:

Keep earphones out of reach of children to prevent choking or other injuries.

5. Specifications

6. Declaration on Toxic or Hazardous Substances

This section details the presence of hazardous substances in electronic products according to Chinese standards (GB/T 26572-2011 and SJ/T 11364-2014). The table indicates the limits for Cadmium (Cd), Lead (Pb), Mercury (Hg), Hexavalent Chromium (Cr(VI)), Polybrominated Biphenyls (PBB), and Polybrominated Diphenyl Ethers (PBDE) in components like PCB, Battery, and Accessories. 'O' signifies below the limit, and 'X' signifies exceeding the limit.

Environmental protection service life marks may vary by component and manufacturer. Component markings take precedence.

7. Warranty Terms

Zkoee provides a one-year warranty for hardware defects in materials and workmanship from the date of initial retail purchase. This warranty does not cover normal wear and tear, aging, or damage caused by accidental or improper use.

8. Packing List

• Earphones: 2pcs
• Charging box: 1pcs
• Instruction Manual: 1pcs
• Charging cable: 1pcs

Manufacturer Information

Brand Name: Guangzhou Lear Electronic Technology Co., Ltd

Address: Room 101, No. 8, Second Lane, East Dalang Road, Baiyun District, Guangzhou

Executive Standard: GB4943.1-2011

Hotline: 400-653-1868

Website: www.zkoeetws.com

Manufacturer: Shenzhen Tengliwei Electronic Development Co., Ltd

Production Place: 4th Floor, Weixing Science Park, No. 268, Baoshi East Road, Shiyan Street, Bao'an District, Shenzhen

Copyright © 2010-2021 Guangzhou Lear Technology Co., Ltd. All Rights Reserved.

CE certification mark present.

Note: Only applicable to safe use in areas with an altitude of 2000 meters and below.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.