Shark FA220UK Fan User Guide
This document provides setup instructions, safety guidelines, and warranty information for the Shark FA220UK fan.
Manufacturer's Guarantee
The Shark representative will assist with troubleshooting. If the item fails, a replacement part or a free returns label will be provided. The defective product must be boxed for return. Genuine Shark spares and accessories are available at www.sharkclean.co.uk. Damage from non-Shark spares may void the guarantee.
Guarantee Details:
- Coverage: Repair or replacement (at Shark's option) of your Shark machine, including all parts and labour.
- Duration: One year as standard, or two years if registered within 28 days of purchase.
- What's Not Covered: Normal wear and tear, accidental damage, misuse, neglect, careless operation not in accordance with the manual, damage from non-domestic use, damage from non-Shark parts/accessories, faulty installation (unless by Shark), or repairs by unauthorized parties.
- Claiming: Contact the customer service helpline on 0800 862 0453 or visit https://support.sharkclean.co.uk/.
Contact Information:
- SharkNinja Europe Limited, 3150 Century Way, Thorpe Park, Leeds, LS15 8ZB, UK. Phone: +44 (0)800 862 0453. Website: www.sharkclean.co.uk
- SharkNinja Germany GmbH, Rotfeder-Ring 9, 60327 Frankfurt am Main, Germany. Website: www.sharkclean.eu
For full instructions or to purchase accessories, visit qr.sharkclean.com/FA220UK or scan the provided QR code.
Important Information
Register Your Purchase
Register your product at sharkclean.uk/register-guarantee. Scanning the QR code with a mobile device provides access to product support, warranty information, troubleshooting, and exclusive promotions.
Tip: Model and serial numbers are located on the QR code on the back of the unit.
Record This Information
- Model Number: FA220UK
- Serial Number: [To be filled by user]
- Date of Purchase: [To be filled by user]
- Store of Purchase: [To be filled by user]
Technical Specifications
- Voltage: 220-240V 50Hz - 60Hz
- Watts: 36W
Battery Removal and Disposal (Remote Control)
The remote control uses a lithium button battery. When depleted, remove and recycle the battery according to local regulations. Do not incinerate or compost. Contact local recycling centers for disposal information.
Important Safety Instructions
Suitability: Suitable for Outdoor Use & Household Use Only. IPX4 Rain Resistant (excluding the remote).
Warning: To reduce the risk of fire, electric shock, or injury, read all instructions before use.
- Use only the supplied charger for the rechargeable battery (models GQ36-120300-ABO or AJJ3-1).
- Do not attempt to disassemble or incinerate the battery pack. Consult local waste authorities for recycling options.
- Dispose of coin batteries properly. Keep away from children (choke hazard).
- Connect only to an outlet with a Residual Current Device (RCD).
- Use on a stable, level surface.
- Do not use near pools, bathtubs, showers, basins, or other water vessels.
- Do not operate with a damaged power supply wire or charger.
- Do not run cord under carpeting or cover with rugs. Keep away from high-traffic areas.
- If the charger cord is damaged, it must be replaced.
- Not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience, unless supervised.
- Supervise children to ensure they do not play with the appliance.
- Cleaning and user maintenance should not be done by children without supervision.
- Unplug before cleaning or maintenance.
- Only use Shark branded accessories.
- Do not use if the appliance is not working correctly, has been dropped, damaged, left outdoors without protection, or dropped into water.
- Turn off controls before plugging/unplugging.
- Unplug when not in use and before maintenance/cleaning.
- Hand wash exterior/hard plastic/non-electronic parts with water only. Do not immerse. Chemicals may damage the unit.
- Do not attempt to repair electrical or mechanical functions; this may cause danger and void the warranty.
Lithium Coin Cell Battery Warning: Risk of severe internal burns and death if swallowed. Seek immediate medical attention if a battery is swallowed or placed inside any part of the body. Ensure battery compartments are securely closed.
Lithium Battery Safety Warnings: Lithium batteries store significant energy and can vent fire or explode if mistreated. Do not open, drop, short-circuit, puncture, incinerate, or expose to extreme temperatures (below 0°C or above 60°C). Inspect battery pack before use; do not use or charge if damaged. Charge only with the provided charger.
Power Supply Safety: Do not use extension cords. Do not use within 3 meters of a pool or in a bathroom. For outdoor use, install only to a covered, weatherproof, RCD-protected receptacle. Contact a qualified electrician if needed.
Quick Start Guide
Setting Up Your Fan
Follow these steps to assemble your Shark Fan:
- Align and insert the Upper Pole into the Lower Pole until it clicks into place.
- Align the yellow dot on the assembled pole with the yellow dot on the BASE, then slide the pole down onto the base.
- Insert the BOLT into the bottom of the BASE and twist the HEX KEY clockwise to fasten the pole to the base.
- Insert the fan post into the top of the ASSEMBLED POLE until it clicks into place. (Caution: risk of finger pinch).
- Charge the fan to 100% battery before using it without the cord. For first use with the remote, press the POWER BUTTON on the fan.
Features
- CORDLESS: This is a 2-in-1 fan that can be used with or without the power cord.
- OUTDOORS: This fan is water-resistant (IPX4) and can be enjoyed indoors or outdoors.
- LIFT-AWAY: Press the lift-away button and lift the handle to convert the fan from pedestal to tabletop mode.
- BREEZE MODES: Activate breeze modes for a varying airflow that mimics nature.
- OSCILLATION: Select the angle of oscillation (45°, 90°, 180°) to best suit your needs. The remote control can also move the fan head left or right.
- TIMER: Set the timer to automatically turn off the fan (1, 2, 3, 4, or 5 hours).
- REMOTE: Store the remote on the back of the fan head when not in use.
How to Use Your Fan
Fan Speeds
Press to switch between fan speeds 1-5. LED lights indicate the selected speed.
- Strong Breeze Mode: (Remote only) Press and hold for 3 seconds.
- Gentle Breeze Mode: (Remote only) Press and hold for 3 seconds.
Oscillation Settings
Press to toggle between oscillation angles: 1 - 45°, 2 - 90°, 3 - 180°. LED lights indicate the selected angle.
Use the remote control to move the fan head left or right.
Timer
(Remote only) Press to switch between timer settings: 1 Hour, 2 Hours, 3 Hours, 4 Hours, 5 Hours. LED lights indicate the set duration. LEDs turn off after 20 seconds; press the timer button again to check remaining time.
Runtime and Charging
- Maximum Cordless Runtime: Up to 24 hours on fan speed 1.
- Maximum Cordless Performance: Up to 2 hours on fan speed 5.
- Plugged In: Indefinite runtime; the fan charges while operating.
- Charge Time: 5 hours from 0% to 100% battery.
Battery Indicator
- 100% charged: White light
- 51%-99%: Green light
- 21%-50%: Amber light
- 6%-20%: Red light steady
- 5% and below: Red light blinking
Tip: The fan works while charging.