BLAZE PowerZone 1004 Power Amplifier Brûkersgids
Kartonynhâld
- Amplifier ienheid
- Output Connector x 1 of 2
- Netspanningskabel
- Adhesive rubberen fuotten x 4
- Ynfier connector x 1 of 2
- Dokumintpakket
- GPIO socket Anschluss
- Rack Ears (PowerZone 1004)
ferbinings
DIP Switch Funksjes
| OMSKEAKELJE | ÚT↓ | ON↑ | |
| 1 | Kanaal 1 yn Low-Z modus | Kanaal 1 yn Hi-Z modus | |
| 2 | Kanaal 2 yn Low-Z modus | Kanaal 2 yn Hi-Z modus | |
| 3 | Channel 3 in Low-Z mode* | Channel 3 in Hi-Z mode* | |
| 4 | Channel 4 in Low-Z mode* | Channel 4 in Hi-Z mode* | |
| 5 | 70V Hi-Z mode (for channels in Hi-Z mode) |
100V Hi-Z mode
(for channels in Hi-Z mode) |
|
| 6 | Ynput ganging 1: Alle | Ynput ganging 1:1 | |
| 7 | GPIO standby polariteit NO (normaal iepen) | GPIO standby polariteit NC (normaal sluten) | |
| 8 | Front paniel kontrôle beskoattele. | Frontpanelkontrôle ûntskoattele. |
* Not applicable to two channel amplifters.
Ynstallaasje-notysjes
- Ensure that rack or other confined installation does not restrict the airflow required for safe and reliable operation of the equipment. It is important to ensure that the 40°C maximum operating temperature for the equipment is not exceeded.
- Amplifters sille net oerskeakelje út standby modus útsein as in ynfier sinjaal is oanwêzich of de standby switch wurdt toggled.
GPIO Funksjes
Stypje
- A full user manual that includes information on installation, mounting accessories and amplifier operation is available online. Go to www.blaze-audio.com or scan the QR code.
Lês mear oer dizze hantlieding & Download PDF:
Dokuminten / Resources
 |
BLAZE PowerZone 1004 Power Amplibbener [pdf] Brûkersgids PowerZone 252, PowerZone 504, PowerZone 1004, PowerZone 1004 Power Amplifier, Krêft Amplibbener, Amplibbener |
