FUNSNAP Capture π Foldable Gimbal Stabilizer User Guide

FUNSNAP Capture π Foldable Gimbal Stabilizer

Download “Capture2” APP

Scan the QR code on the left side or search for “Capture2” on Google Play / App Store then download and install it.

Unfold the gimbal

Rotate the gimbal arm by 180 degrees in the direction indicated.

Secure the phone to the clamp

The position of clamp is around 5mm off to the center of the phone to be in balance. Make sure the lens of the phone camera is at the left side of the clamp

Boot up

1. Long press the  power button for 3 seconds to boot up
2. Turn on the bluetooth of your phone
3. Open the “Capture2” App
4. Connect the Gimbal

Fold back

Rotate the gimbal arm by 180 degrees in the direction indicated until a click is heard. Adjust the phone clamp as necessary.

Documents / Resources