YS47 Wireless Joypad Switch
“
Product Information
Specifications
- Model: KS37/KS37L
- Connectivity: Bluetooth
- Interface: Type-C
- LED Lights: 4
- Turbo Speeds: 5Hz, 12Hz, 20Hz
Product Usage Instructions
Pairing and Connecting
Method 1: Insert the slide rail into the host to connect via
Bluetooth automatically.
Method 2: Press the pairing key for 3 seconds in the off state
to pair. Short press the home/capture key to reconnect.
Turbo Functionality
To activate turbo mode:
- Press Turbo + X for continuous manual transmission.
- Press Turbo + X again for automatic continuous
transmission. - Press Turbo + X a third time to cancel continuous sending
function.
Adjusting Turbo Speeds
Left Handle:
- Press Turbo + (-) to adjust speed – 5Hz, 12Hz, 20Hz.
Right Handle:
- Press Turbo + (+) to adjust speed – 5Hz, 12Hz, 20Hz.
Motion Adjustment
Left Handle:
- T + Left Rocker Up increases motor motion.
- T + Rocker Down decreases motor motion.
Right Handle:
- T + Right Rocker Up increases motor motion.
- T + Rocker Down decreases motor motion.
LED Lights
To cycle through LED light sequences:
- A. T + L3 (Rocker Click Down) – Blue, Red, Green, Yellow,
etc. - B. T + L3 (Rocker Double-Click Down) – Color Breathing Lamp
Cycle.
Charging and Shutdown
When fully charged, LED 4 lights flash slowly. The fourth LED
stays on continuously.
Frequently Asked Questions (FAQ)
Q: How do I pair the controller with my device?
A: Follow Method 1 or Method 2 mentioned in the user manual for
pairing instructions.
Q: How do I adjust the turbo speeds?
A: Use the Turbo + (-) key on the left handle and Turbo + (+)
key on the right handle to adjust speeds between 5Hz, 12Hz, and
20Hz.
Q: What do the LED light sequences signify?
A: The LED lights cycle through different colors based on the
button combinations mentioned in the manual.
“`
” _”
” +” X
Y
A
B
HOME
” _” Left stick
Direction key Screenshot
” +” X
Y
A
B
Right stick
HOME
M
M
M
M
T
T
T
T
3R
3L
3R
3L
L ZL
R ZR
SL
SR
TYPE-C
SR SL
TYPE-C
Pair3 Home/Capture
1.Turbo +X() 2.Turbo +X () 3.Turbo +X Turbo + -Turbo35Hz 12Hz 20Hz
Turbo + +Turbo35Hz 12Hz 20Hz
1.”T”+”” 1.”T”+”” 0.5
2.”T”+”” 2.”T”+””
A.TL3() 🙂 B.TL3():
LED4 LED4
L ZL
SL Pairing key
SR TYPE-C
R ZR
SR Pairing key SL TYPE-C
Methode1:Insert the slide rail into the host for use, and pull out the slide rail to automatically connect the Bluetooth back to the host
Methode2:In the off state, press pair key for 3 seconds to pair. Short press the home / capture key to connect back
There are three ways to cycle: 1. Press the turbo key + X key (for the first time) and press and hold the key to send
continuously manually 2. Press the turbo key + X key (the second time) without pressing and holding the
automatic continuous transmission 3. Press turbo + X (the third time) to cancel the continuous sending function Adjust the continuous firing speed: Left handle: Turbo + (-) key, adjust turbo speed, set successful vibration prompt, 3 gears in
total: 5Hz, 12Hz, 20Hz (cycle) adjust gear Right handle: Turbo + (+) key, adjust turbo speed, set successful vibration prompt, 3 gears
in total: 5Hz, 12Hz, 20Hz (cycle) adjust gear
Left handle: 1. “T” + “left rocker up” increases motor motion 2. “T” + “rocker down” decreases motor motion Right handle: 1. “T” + “right rocker up” increases motor motion 2. “T” + “rocker down” decreases motor motion After successful adjustment, the motor of this gear vibrates for 0.5 seconds
A. T + L3 (rocker click down) sequence: blue, red, green, yellow, green, orange, purple, pink, magic color) light cycle
B. T plus L3 (rocker double-click down) sequence: color breathing lamp cycle / slide color breathing lamp cycle / turn off light
Shutdown Charging Fully charged
Led 4 lights flash slowly The fourth LED is on for a long time
” _”
MODEL:KS37/KS37L
” +”
X
Y
A
B
” _” Linker Stock
Home
Wegweiser Schlüssel
Screenshot
” +”
X
Y
A
B
Rechter Stock Home
M
M
M
M
T
T
T
T
3R
3L
3R
3L
L ZL
R ZR
SL
SR
TYPE-C
SR
SL
TYPE-C
1 Bluetooth 2Pair3 Home/Capture
3: 1.Turbo+X 2.+X2 3.+X3 Turbo+(-)Turbo35
Hz 12 Hz 20 Hz Turbo+(+)Turbo35
Hz 12 Hz 20 Hz()
1.T 2.T 1.T 2.T 0.5
A.TL 3
B.TL 3
LED 4 LED 4
L ZL
SL Schlüsselbund
SR TYPE-C
R ZR
SR Schlüsselbund SL TYPE-C
Methode1:Stecken Sie die Diaschiene in den Host und ziehen Sie die Diaschiene aus, um den Bluetooth automatisch mit dem Host zu verbinden.
Methode2:Im Off-Zustand drücken Sie die Pair-Taste für drei Sekunden, um sich zu paaren.Kurz drücken Sie die Home /Capture-Taste, um wieder zu verbinden
Es gibt drei Möglichkeiten zum Radfahren: 1. Drücken Sie die Turbo-Taste + X (zum ersten Mal) und drücken Sie und halten Sie die
Taste, um kontinuierlich manuell zu senden 2. Drücken Sie die Turbo-Taste + X (das zweite Mal) ohne Drücken und Halten der
automatischen kontinuierlichen Übertragung 3. Drücken Sie Turbo + X (das dritte Mal), um die fortlaufende Sendefunktion zu beenden Einstellen der kontinuierlichen Brenngeschwindigkeit: Linker Griff: Turbo + (-) Schlüssel, Turbo-Geschwindigkeit einstellen, erfolgreiche
Vibrations-Prompt einstellen, 3-Gänge insgesamt: 5Hz, 12Hz, 20Hz (Zyklus) Einstellrad Rechter Griff: Turbo + (+) Taste, Turbo-Geschwindigkeit einstellen, erfolgreiche
Vibrations-Prompt einstellen, 3-Gänge insgesamt: 5Hz, 12Hz, 20Hz (Zyklus) Einstellrad
Linker Griff: 1. “T” + “linker Rocker nach oben” erhöht die motorische Bewegung 2. “T” + “rocker down” verringert die motorische Bewegung Rechter Griff: 1. “T” + “rechte Rocker nach oben” erhöht die Motorbewegung 2. “T” + “rocker down” verringert die Bewegungsfreiheit Nach erfolgreicher Einstellung schwingt der Motor dieses Getriebes für 0,5 Sekunden
A.T + L3 (Rocker nach unten) Sequenz: blau, rot, grün, grün, orange, lila, pink, magic color) Lichtzyklus
B.T plus L3 (Rocker Doppelklick nach unten) Sequenz: Farb-Atemlampe Zyklus / Diafarbe Atemlampe Zyklus / Ausschalten Licht
Laden abschalten Voll aufgeladen
Led 4-Leuchten blinken langsam Die vierte LED ist schon lange an
FCC Caution. (1)§ 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Changes or modification warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB 447498 (2)(a)(i)
Documents / Resources
 | Funlab YS47 Wireless Joypad Switch [pdf] Instruction Manual KS37, KS37L, YS47 Wireless Joypad Switch, YS47, Wireless Joypad Switch, Joypad Switch, Switch |