FtyCamPro Spy Camera User Manual
App installation
- Download the FtyCamPro app by using App Store for IOS and Google Play for Android. To make the installation easier, scan the following QR code.
Note: We recommend you to use the built-in browser or another QR code scanner to download the app. You can’t download the app with WeChat scanner.
- Open the FtyCamPro cam, press “+” to add a network camera (the name is similar to XXX-nnnnnn-YYYYY).
- Go to the WiFi connection page, select the corresponding network and connect (the name is similar to XXX-nnnnnn-YYYYY). Once the connection is successful, return to the app and the device will be successfully added. (If the app does not automatically connect to a device, click on search to add the device you want.)
- Once the camera is successfully connected, select it to capture real-time videos. The device can be controlled from the video interface.
- Main icons and buttons on the video page.
Take snapshots and record videos
Vertical and horizontal rotation of images
Camera settings
- Press the tool settings button to go to the advanced settings page.
- Fill in the camera name and P2P code (default password: admin) and click “Yes”. The camera will connect successfully. After completing the camera settings, we advise you to change the P2P code.
- Set the WiFi connection for the camera. Select “WiFi Settings” to see the available networks. Select your WiFi network (SSID), enter the password and press “Complete”.
Note: If the camera connects to WiFi after it is saved, it will exit the application for about a minute to complete the connection.
- SD card registration settings
Main settings and indicator light
If you want to connect a new camera, reset it to its original settings. When the camera is turned on, press and hold “MODE” for more than 5 seconds and the indicator light will flash slowly (once every 0.5 seconds). Then open the mobile settings, connect the mobile to the camera network, and wait for it to connect before opening the application.
Indicator light:
- When in AP mode, the blue light will flash. The red light refers to USB operation and turns off when the device is fully charged.
- During WiFi setup, the blue light is always on. If the blue light flashes, make sure the WiFi password is correct.
Note: If the application continues to have problems, check the following parameters:
A. If the mobile cannot connect to the AP camera, connect the mobile to the cam hotspot AP.
B. A public WiFi network requesting a login password may not be compatible.
C. Avoid entering the wrong network name, password, and UID.
D. Chinese WiFi network names, passwords and special symbols are not compatible.
E. 5G WiFi signals are not compatible.
FAQ
1.Why the application does not detect / cannot connect to the network?
Make sure the device is connected properly and check if the operation of the application is limited.
If you forget your username or password, you can go back to the original settings to find your default username and password.
Press the “MODE” button for about 5 seconds until the camera restarts.
Remove the protective film from the lenses. If the image is still blurred, rotate the lens and focus on theimage.
Documents / Resources
 | Spy Camera |
References
- User Manualmanual.tools
bonjour,pouvez vous m envoyer ID ou le QR de ma camera merci d avance.
How can I find the ID or QR code for my FtyCamPro Spy Camera?
To find the ID or QR code for your FtyCamPro Spy Camera, please check the following locations:
XXX-nnnnnn-YYYYY).If you are looking for the QR code to download the app, it is provided in the manual. If you have lost the physical sticker on the camera, resetting the device by holding the MODE button for 5 seconds will allow you to find its ID again via the WiFi hotspot method mentioned above.
Read the full Q&A page
This is absolutely garbage! Picture is bad, minimal instructions, and an adhesive only camera as far as mounting? It doesn’t stick to brick very well. Also with the heat here in the south it falls right off! Does it not have night vision of some sort? I have absolutely no clue because of lack of an owners manual, and cannot see anything with the lights off! 2 guys who wanted to make a better camera my ass! This things absolutely sucks!!
How do I fix blurry images, mount the camera properly, and does it have night vision?
Based on the FtyCamPro Spy Camera manual, here are the solutions to the issues you mentioned:
Read the full Q&A page
Como instalar duas câmeras no Ftycampro?
How to install two cameras in FtyCamPro?
To install multiple cameras in the FtyCamPro app, you simply need to repeat the pairing process for each individual device. The app is designed to manage multiple cameras within the same interface.
Follow these steps for each camera you wish to add:
XXX-nnnnnn-YYYYY(this is the camera's unique hotspot).Note: If you are adding a camera that was previously used, it is recommended to reset it first by holding the "MODE" button for more than 5 seconds until the indicator light flashes slowly.
Read the full Q&A page