YF19plus BT Speaker
User Manual BT speaker YF19plus
Specification:
Loudspeaker: 2*15W Built-in high performance speaker Support TF card slot, 1GB-32GB Support MP3 format music Support hands free 3000 MAH rechargeable battery
Operating your speaker Bluetooth Mode
Press
to turn on the device and enter Bluetooth Mode.
Follow the operating instructions for Bluetooth connection on your device and allow searching Bluetooth
speaker
Usually this is done by going to “set up “menu, connect for “Bluetooth” function and then selecting the
option to search for Bluetooth devices
Your device (mobile phone, PC, tablet,. etc.) will detect the Bluetooth speaker and ask if you wish to
connect with the speaker “YF19”. Press “Yes” or “confirm” to confirm this action
if your phone requires a password or a PIN number, enter 0000 and confirm it.
After connection, you can adjust volume and select last/next song by pressing
and
.If
you want to get the coming phone call, short press
, then you can make phone call by the speaker.
Press again to end the phone call. And the speaker will recover playing music if audio source don’t be
stopped.
Music play Mode
Short press
, the system will enter music playing after insert the Micro SD card before switching
modes. It will be played music from TF card or USB disk from 1GB to 32GB. Short press in 1 second
to pause the music ; press it again, to restore music playing;
Aux-in Mode
Press
to turn on the device ,then connect with the speaker by Aux in cable to PC ,Mobile or other
audio source by Line in cable .And then audio signal can be played by the speaker from external audio
resource. Short press in 1 second
switch to other modes
During Aux-in mode, long press /
for volume down/ up
FM Mode
Press
to turn on the device, connect the USB cable,short press
until you hear the prompt
for radio, short press
it will search all FM radio stations. Once the search is finished, press
/
to go back to desired radio station.
TWS
Press
to turn on the two devices, long press
Enter Bluetooth Mode, play the music.
for one devicces, until you hear the prompt.
Charging
Charge the speaker in “OFF”mode through the type-C cable from a computer or through a DC adaptor. Status LED Indication will be red, when charge full, the light will be off
Note:
Do not let children play with the product Do not throw the product into fire Do not use in very humid or high/low temperature environments. Product performance will decrease when used in such environments.
Documents / Resources
 | FTX YF19plus BT Speaker [pdf] User Manual YF19plus, YF19plus BT Speaker, YF19plus Speaker, BT Speaker, Speaker |