LiTE 2 Home Remote Gateway
“
Specifications:
- Product Name: Freedom Won LiTE 2 Home
- Release Date: 17/12/2024
- Manufacturer: Freedom Won
- Model: LiTE 2
- Location: Longmeadow Business Estate Nguni and Hereford Rd
Modderfontein, Edenvale 1609 South Africa
Product Usage Instructions:
Preparation Steps:
- Power On the Battery
Press the ON button to power on the battery.
- Ensure Wi-Fi Signal
Before connecting the antenna, ensure Wi-Fi signal is available
near the battery location. If not, consider using a Wi-Fi range
extender or running an Ethernet cable. - Connecting the Antenna
Connect the antenna to the battery connector securely.
- Access the Battery’s Wi-Fi Access Point (AP)
Locate the battery’s Wi-Fi network named FW_ followed by the
last 6 digits of the serial number. Connect to this network using
the password: Freedom Won.
Connecting to the Internet:
Wi-Fi Connection:
- Ensure the battery is powered on.
- Check for Wi-Fi signal availability near the battery.
- Connect the antenna to the battery securely.
- Access the battery’s Wi-Fi network and connect using password:
Freedom Won.
Ethernet Connection:
- If Wi-Fi connection is unavailable, connect the battery to the
network via Ethernet cable.
Final Steps:
- Once connected, proceed to the portal for further setup.
FAQ:
Q: What should I do if I cannot find the battery’s Wi-Fi
network?
A: Make sure the battery is powered on and in close proximity.
Check your device’s wireless settings and scan for available
networks.
Q: Can I use a Wi-Fi range extender with the battery?
A: Yes, you can use a Wi-Fi range extender if the signal near
the battery location is weak.
“`
FREEDOM WON LiTE 2 HOME Connectivity Setup Guide
Copyrights reserved by Freedom Won
This document specifically covers the LiTE 2 Home range. For more detailed information, refer
to the LiTE 2 installation manual.
SETUP GUIDE
Contact us: www.freedomwon.co.za
Freedom Won LiTE 2 Home Connectivity Setup Guide
LiTE 2
Longmeadow Business Estate Nguni and Hereford Rd Modderfontein, Edenvale 1609 South Africa www.freedomwon.co.za
Release Date: 17/12/2024
Connecting a Freedom Won Home LiTE 2 Unit to the Internet
Technical and Installation Assistance – Contact:
For technical and installation support, please contact your Freedom Won distributor, reseller, or installer. A directory of distributors and reseller installers can be found at www.freedomwon.co.za. For advanced support, please email support@freedomwon.co.za.
This guide will walk you through the procedure of connecting the Freedom Won Home LiTE 2 battery to an existing network. The steps outlined here should be followed after the battery has been properly set up according to the Freedom Won Installation Manual.
Preparation Steps
These are the steps to connect the battery to an existing Wi-Fi/Ethernet Network. This is a summary of the steps; they are explained in detail below:
1. Make sure the battery is powered on. 2.1 Ensure Wi-Fi signal is available where the battery is standing. 2.2 Connect the battery antenna to the battery 2.3 Access the Battery Wi-Fi access point. 2.4 Connect to the Wi-Fi network. 3. If the Wi-Fi connection is unavailable or unsuccessful, connect the battery to the network via ethernet. 4. Once everything is connected go to the portal.
Copyrights reserved by Freedom Won
Revision: FW V1.4
1 of 7
Freedom Won LiTE 2 Home Connectivity Setup Guide
LiTE 2
1. Power On the Battery
Press the ON button and ensure the battery is powered on before continuing to the next step.
2.1 Ensure Wi-Fi Signal
Before connecting the antenna, ensure that Wi-Fi coverage is available in the vicinity of the room where the battery is installed. If there is no signal near the battery, consider using a Wi-Fi range extender or booster, or alternatively, running an Ethernet cable directly to the system. For further details, refer to step 3.
Once a Wi-Fi signal is established move onto the next step.
2.2 Connecting the Antenna
A strong signal strength will ensure a reliable connection and optimal performance for the system.
1. Connect the antenna to the battery connector. a. Make the connection finger tight and secure. b. Do not use a spanner or tool to tighten the antenna as it could cause irreparable damage
Once the antenna is securely fixed to the battery, proceed to the next step.
2.3 Access the Battery’s Wi-Fi Access Point (AP)
The access point (AP) of the battery will be called FW_ followed by the last 6 digits of the battery serial number. For example: FW_123456
Once the battery is powered on, the access point (AP) will be available for connection via a smartphone or laptop. Navigate to the device’s wireless management settings and search for the battery’s Wi-Fi network name. Connect directly to this Wi-Fi network.
The password is: Freedom Won. Then proceed to the next step.
2.4 Connect the system to an Existing Wi-Fi Network
1. Once connected to the batteries Access Point, navigate to the smartphone or laptops web browser.
2. In the search bar type in the following http://10.232.10.232 and press enter. A text box will appear and request you to sign in.
3. Enter the following username and password into the appropriate boxes and press sign in. Note: This is case sensitive.
Copyrights reserved by Freedom Won
Revision: FW V1.4
2 of 7
Freedom Won LiTE 2 Home Connectivity Setup Guide
Username: user Password: freedom
LiTE 2
Fig. 1
4. Once signed in, the system will load and display the device status screen, which shows the current connection status. To set up the Wi-Fi, navigate to the network settings in the left-hand menu.
Fig. 2
Copyrights reserved by Freedom Won
Revision: FW V1.4
3 of 7
Freedom Won LiTE 2 Home Connectivity Setup Guide
LiTE 2
5. This menu will now display the “Network Settings” heading. Begin by clicking the search button next to the AP’s SSID. This will initiate a search for available Wi-Fi networks and open a new window to display them.
Fig. 3
6. The menu that opens will display the available Wi-Fi networks. Use the checkbox on the left to select the Wi-Fi network you wish to connect to. Press “Apply” to select that network.
Fig. 4
Copyrights reserved by Freedom Won
Revision: FW V1.4
4 of 7
Freedom Won LiTE 2 Home Connectivity Setup Guide
LiTE 2
7. Once you press “Apply,” the Wi-Fi list menu will close, and you will be returned to the STA Interface Settings or “Wi-Fi Settings” page. Your selected Wi-Fi network will now appear in the AP’s SSID box.
Next add the Wi-Fi password for this network to the “Password” text box and click “Apply”.
Fig. 5 8. Once you click apply a window will appear asking you to reboot the device.
Fig. 6
Press the “Restart” button. The Wi-Fi module in the battery will reboot and connect to the Wi-Fi network again set in the above steps.
9. Once the device has rebooted, you can check the connection status through the status page to ensure everything is properly connected. The device status screen will display the Wi-Fi connection status as well as the connection status to the cloud.
Copyrights reserved by Freedom Won
Revision: FW V1.4
5 of 7
Freedom Won LiTE 2 Home Connectivity Setup Guide
LiTE 2
Fig. 7
3. Connecting via ethernet
If a Wi-Fi connection is unsuccessful or not feasible, the battery can be connected to the network via Ethernet. Simply plug an Ethernet cable into the Ethernet port on the side of the battery and connect the other end to your network.
4. Once Everything is Connected, Access the Portal
Once the battery has been successfully connected to the network via Wi-Fi or Ethernet, the Freedom Won portal can be accessed through the following link: https://portal.fw-cloud.net. Please refer to the portal manual for instructions on how to use the Freedom Won portal.
Copyrights reserved by Freedom Won
Revision: FW V1.4
6 of 7
Freedom Won LiTE 2 Home Connectivity Setup Guide
LiTE 2
4. Identifying a Freedom Won LiTE 2
Freedom Won LiTE 2 units have different elements from the LiTE range units.
The model number on the front of the unit will incorporate a single forward slash (/) for LiTE (1) range units or a double forward slash (//) for LiTE 2 range units.
LiTE 2 units will also include a Wi-Fi connectivity symbol on the side of the unit, normally located near the Wi-Fi/Ethernet ports.
See example comparison below:
Item
LiTE Branding example
LiTE 2 Branding example
Image (example)
Model Branding (front of unit)
Take note of the `/’ (LiTE units) or
`//’ (LiTE 2 units)
Wi-Fi/Connectivity Sticker
(side of unit)
N/A Table 1
Copyrights reserved by Freedom Won
Revision: FW V1.4
7 of 7
LiTE 2 RANGE
SCAN ME TO LOG A SUPPORT TICKET
Freedom Won Technical Support Contact Details Please use the following contact details to make enquiries on technical matters
or for actual technical support with design and/or commissioning: Email:
support@freedomwon.co.za Office:
+27 (0) 10 597 7794
www.freedomwon.co.za
Documents / Resources
 | Freedom WON LiTE 2 Home Remote Gateway [pdf] User Guide LiTE 2, LiTE 2 Home Remote Gateway, Home Remote Gateway, Remote Gateway, Gateway |