Foscam Support - FAQs
Foscam Official Website - Security Cameras, NVRs, Baby Monitors, IP Cameras, NVR Kits, Security Kit, Pet Monitors, Cloud Storage ServiceFoscam Declaration of Conformity SystemFoscam Open-Information System
User Manual for FOSCAM models including: FOSCAM, 8 Channel, NVR, FN7118E-B4
To connect your cameras to the NVR simply connect the supplied cable in to the socket of the small cable coming from the camera.
5 6 7 8 1 2 3 4 285mm.00 142.5mm.00 95.00mm 190.00mm 285.00mm 380.00mm Quick Setup Guide Security Tips 2 1 4 NVR Structure Device Connection V1.1 305503000543
File Info : application/pdf, 2 Pages, 1.42MB
DocumentDocument1 Security Tips 3 4 Installing the Cameras NVR Structure Quick Setup Guide For detailed manuals, tools, etc., please visit foscam.com/tools V1.1 305503000543 1 5 Device Connection Step One - Connect Monitor A: Connect the NVR to your HDTV Plug one end in to the HD-OUT socket on the rear of the NVR and the other in to a spare HD-OUT port on your TV. Please change the password of your Foscam NVR App account, and NVR and cameras username regularly. The password should contain a combination of numbers, letters and special characters. Please keep the username and password of your cameras, NVR and Foscam NVR App account safe. Please update your camera to the latest firmware regularly for an optimal user experience. Place the cameras in your preferred locations and use the included screws to mount them. 0~360° 0~90° 0~360° 2 Package Contents 0~360° 0~90° 0~360° 8 Channel NVR 4 x 1080P Bullet IP Cameras 2 x 25m (82 ft) Ethernet Cable 2 x 15m (49 ft) Ethernet Cable 1 x1.5m (5 ft) Ethernet Cable Quick Setup Guide Screw Pack USB Mouse Power Adapter for NVR Warranty Card Quick Operation Guide Please Note: Ensure that the rain or water will not reach the connector ports at the end of the pig tail wiring. These connectors are not weather-resistant. 2 Step Two - Connect your cameras To connect your cameras to the NVR simply connect the supplied cable in to the socket of the small cable coming from the camera then plug the other end of this cable into one of the ports on the back of the NVR. There is a one-to-one relationship between the IP Camera Input port and the video channel of your NVR. 3 NVR Mouse Step Five - Connect the power adapter Connect the power adapter to the power input port. Power Switch IP Cameras Input Ethernet Port VGA Output Power Input USB Reset HD-OUT USB Power Switch : Power on / off button. IP Cameras Input : These ports are for both power and video and are where you plug in your camera cables. Ethernet Port : 10 / 100Mb. You can connect your NVR to the internet via the Ethernet cable. VGA Output : Connect to your TV or computer monitor via VGA port. Power Input : This is where you connect the NVR's DC power supply. USB : For connecting your USB mouse to control the NVR. Reset : Press and hold the "Reset" button for a few seconds while the NVR is powered on, and then release. The NVR will automatically reboot and restore factory settings. The username and password will be set to the default value, which are "admin / (blank)" respectively. HD-OUT : Connect to your HDTV or computer monitor with HD-OUT port. 4 7 Technical Support If you have problems with your Foscam device, please contact the reseller you purchased from, or you can e-mail the headquarter technical support team: support@foscam.com Your valuable comments and suggestions on improving Foscam products are welcomed! NVR HD-OUT Cable Note: If you have already connected your NVR using HD-OUT you don't need to do it again using the VGA port. B: Connect the NVR to a Monitor or TV Use the VGA cable that came with your monitor to connect it to the NVR's VGA port. NVR VGA Cable (not supplied) 5 IP Camera NVR Ethernet Cable Step Three - Connect to your network Please connect your NVR to the router using Ethernet cable. Please make sure your router is connected to the internet Ethernet Cable Router NVR Step Four - Connect the mouse The USB mouse supplied with your NVR can be connected to either of the two rear USB ports. 6 NVR Power Adapter The connection are now complete. You can turn on the power to enter your NVR's user interface. 6 Product Performance Power Supply: DC 48V 2.0A 96W (NVR) DC 12V 1.0A 12W (IPC) 7 CE Certificate statement Website: https://www.foscam.com/company/ce-certificate.html Exporter and Importer Information Opened to Public: https://www.foscam.com/company/open-information.html Manufacturer: Shenzhen Foscam Intelligent Technology Co., Ltd Addr: Room 901, Unit B, Building 7, Xingke 1st Street Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, 518055, China www.foscam.com As a result of product upgrades and other reasons, this guide may not be able to update in time, resulting in inconsistent with the official website information, please take the official website(www.foscam.com) information as the standard. 8 Camera Camera Ethernet Cable Camera Camera Ethernet Cable NVR Power æ ç è é VGA VGA VGA Cable Monitor Router LAN Ethernet Cable Computer LAN Mouse HD-OUT USB HDD HD-OUT Cable HD-OUT TV