GEEKOM MINI PC MiniAir 11
Installation and Safety Guide
Product Overview
The GEEKOM Mini PC MiniAir 11 is a compact and powerful computing solution. This guide details its components and installation procedures.
Component Identification
The front and rear panels of the Mini PC feature various ports and buttons:
- Front Panel: Power Button/LED, USB-C port + USB 3.2 Gen 1 port, Consumer Infrared (CIR) receiver, SD Card Reader.
- Rear Panel: Power Button/LED, USB 3.2 Gen 2 port + USB-C port, HDMI Port, Mini DisplayPort Connector, Ethernet Port, Electric Power Inlet, Anti-Theft Key Lock Hole.
Installation Steps
- M.2 SSD Installation
- Open the Mini PC casing.
- Insert the M.2 SSD into the designated slot.
- Secure the M.2 SSD.
- DDR4 RAM Installation
- Locate the DDR4 RAM slots.
- Insert the DDR4 RAM modules into the slots, ensuring they click into place.
- VESA Mounting
- Attach the VESA bracket to the back of a monitor or wall mount.
- Mount the Mini PC onto the VESA bracket.
- Connecting Peripherals and Power
- Connect the power adapter to the Mini PC and a power outlet.
- Connect display devices via HDMI or Mini DisplayPort.
- Connect network via the Ethernet port.
- Connect other peripherals via USB ports.
Safety and Caution Information
General Safety:
- AC Power Adapter: Use only the provided AC power adapter. Using a non-approved adapter may pose risks of electric shock, fire, or burns. Operate indoors and in dry environments only. Repairs should only be performed by qualified personnel. Do not open the casing. The adapter is rated for ambient temperatures between 0°C to 35°C (32°F to 95°F). Connect only to a properly wired and grounded power outlet.
- Operating Temperature: This device is suitable for use in ambient temperatures ranging from 0°C to 35°C (32°F to 95°F). Avoid using or storing near heat sources, in direct sunlight, or outside the specified temperature range.
- Medical Devices: This device may interfere with the operation of pacemakers, hearing aids, or other medical devices. To reduce this risk, maintain a distance of 20 cm (8 inches) between this device and the medical device. Refer to the medical device's instructions for more information.
- Modifications: Modifications to wireless solutions, thermal solutions, device components, or the casing may violate compliance requirements and introduce safety risks.
- Battery Replacement: There is a risk of explosion if the battery is replaced incorrectly. Recycle batteries whenever possible. Disposal of used batteries must comply with local environmental regulations.
- Compliance: Failure to use the provided power adapter violates compliance requirements and may expose users to safety risks.
- Transmitter Compliance: This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
