Marshall Minor III - True Wireless

Contents

• English
• Arabic
• Bulgarian
• Croatian
• Czech
• Danish
• Dutch
• Estonian
• Filipino
• Finnish
• French
• German
• Greek
• Hebrew
• Hungarian
• Indonesian
• Italian
• Japanese
• Korean
• Latvian
• Lithuanian
• Norwegian
• Polish
• Portuguese
• Romanian
• Russian
• Simplified Chinese
• Slovak
• Slovene
• Spanish
• Swedish
• Thai
• Traditional Chinese
• Turkish
• Ukrainian
• Vietnamese

Getting Started

1. Open the charging case.
2. Press and hold the button on the bottom of the case until the LED turns to a slow blue pulse.
3. Select MINOR III from your sound device's Bluetooth® list.

Touch Controls

Touch the left or right earbud to control your music and phone calls.

• 1 touch to play/pause or receive/end a call
• 2 touches to skip forward or reject a call
• 3 touches to skip backward

Charging the Earbuds

Put your earbuds back in the case and close the lid to turn them off and begin charging.

Charging the Case

Use a wireless charger or plug the case into a USB power source to charge it. The case is fully charged when the front-facing LED is steady green.

To charge the case using a wireless charger, follow these instructions:

1. Place the charging case with its back flat against the wireless charging pad.
2. Make sure that the front LED lights up to indicate that the case is charging.
3. Once the LED light has turned steady green, the case is fully charged.

LED Indicator

The LED shows the case battery charge, from red through yellow to green (0-100%). It pulses blue while in Bluetooth pairing mode.

Pairing a New Device

Minor III remembers up to 6 previously paired devices and will try to reconnect with the last connected device.

1. Place the earbuds in the case and keep the lid open.
2. Press and hold the button on the bottom of the case until the LED turns to a slow blue pulse.
3. Select MINOR III from your sound device's Bluetooth list.

Note: Minor III can be connected with one sound device at a time. Make sure to disconnect from the current device before reconnecting with a different device.

Resetting the Earbuds

If your earbuds become erratic or unresponsive, follow these instructions:

1. Place the earbuds in the case and close the lid to restart the earbuds.

If the problem persists, perform a factory reset.

Note: This will delete all user settings and the earbuds will need to be paired again.

1. Place the earbuds in the case and keep the lid open.
2. Press and hold the Bluetooth pairing button for 10 seconds, until the LED turns purple, to reset the earbuds to factory settings.
3. Remove MINOR III from your sound device's Bluetooth list before pairing again.

If the problem persists, perform a hardware reset.

Note: This will delete all user settings and the earbuds will need to be paired again.

1. Place the earbuds in the case and keep the lid open.
2. Press and hold the Bluetooth pairing button for 15 seconds to reset the earbuds.
3. Remove MINOR III from your sound device's Bluetooth list before pairing again.