TP-Link Range Extender Quick Installation Guide

1. Power On

Plug the extender into a power outlet next to your router. Wait until its Power LED turns solid on.

Note: For safety, only plug the extender in the direction as shown below.

A diagram illustrates plugging the Range Extender into a power outlet positioned next to a router. The extender's Power LED is shown turning solid on.

Setup with videos: Scan the QR code, or visit https://www.tp-link.com/support/setup-video/#range-extenders and search for the setup video of your model.

* Images may differ from your actual product.

2. Set Up

3. Relocate

1. Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of your router.

2. Wait for about 2 minutes until the LED turns solid blue. If it doesn't, relocate the extender closer to the router to achieve better signal quality.

Tip: To place the extender for optimal Wi-Fi performance, access extender settings via the Tether app and go to Tools > Location Assistant, or simply scan the QR code to visit https://www.tp-link.com/support/faq/3103/.

A diagram shows the ideal placement of the Range Extender halfway between the router and the Wi-Fi dead zone. Color indicators show 'Blue: Suitable location' and 'Red: Too far from router'.

Enjoy!

Connect your devices to the extender wirelessly or via an Ethernet cable, then enjoy the internet. The password of your extended network is the same as your host router.

Tip: You can also set up the extender in Access Point mode to transform your existing wired network to a wireless one. For details, refer to the user guide at https://www.tp-link.com.

An illustration depicts various devices such as a smartphone, tablet, laptop, smart TV, game console, and desktop computer connecting to the extended Wi-Fi network.

Access Extender Settings

After setup, you can access extender settings via any of the methods below. You can reselect host network, change extended network settings and more.

Note: If your extender and router use the same network name, Method 1 is recommended.

Method 1: Via the Tether App

1. Connect your smartphone to the extender's or router's network.

2. Launch the Tether app, select your extender, and log in.

3. View or change extender settings as needed.

Method 2: Via a Web Browser

1. Connect your computer or smartphone to the extender's network. If you are using a computer, unplug the Ethernet cable if any.

2. Launch a web browser, enter http://tplinkrepeater.net in the address bar, and log in.

3. View or change extender settings as needed.

LED Explanation

OneMesh™ with Seamless Roaming

TP-Link OneMesh router and extenders work together to form one unified Wi-Fi network. Walk through your home and stay connected with the fastest possible speeds thanks to OneMesh's seamless coverage.

A diagram illustrates how TP-Link OneMesh routers and extenders create a unified Wi-Fi network with a single network name and password for seamless roaming.

Unified Wi-Fi Network

Router and extenders share the same wireless settings, including network name, password, access control settings and more.

Seamless Roaming

Devices automatically switch between your router and extenders as you move through your home for the fastest possible speeds.

Easy Setup and Management

Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the Tether app or at your router's web management page.

To check full list of TP-Link OneMesh devices, scan the QR code, or visit https://www.tp-link.com/onemesh/compatibility.

FAQ (Frequently Asked Questions)

Q1. What should I do if the Tether app cannot find my device during setup?

Try another method by following the steps below:

1. Connect your smartphone to the extender's network TP-Link_Extender.

A screenshot shows a smartphone connecting to the 'TP-Link_Extender' Wi-Fi network.

2. Launch the Tether app, and select your extender.

Tip: If you have connected to the extender's Wi-Fi but still cannot find your device, try turning off your cellular data.

3. Follow app instructions to complete the setup. If you are still having problems, contact TP-Link technical support.

Q2. What should I do if the LED doesn't turn solid on after completing setup via the Tether app or web browser?

• You may have entered incorrect Wi-Fi password for your host router during the configuration. Check the password and try again.
• Make sure the extender is close to your router, preferably within 16 feet, and away from large electrical appliances.
• If you have enabled wireless MAC filtering, wireless access control, or access control list (ACL) on your router, disable them first, then follow any method on the front page to complete the configuration.
• Try setting it up via the WPS button.
• Reset the extender and go through the configuration again.

If you are still having problems, contact TP-Link technical support.

Q3. How do I reset the extender?

With the extender powered on, use a pin to press the Reset button for 1 second. The extender will reboot.

A visual shows a pin being used to press the reset button on the extender.

If you need more setup help, please visit https://www.tp-link.com/support/faq/3074/, or simply scan the QR code.

Safety Information

• Keep the device away from water [water-hazard], fire [fire-hazard], humidity [humidity-hazard] or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact TP-Link.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

[CE certification] TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce.

[UKCA certification] TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca.

To communicate with TP-Link users or engineers, please join the TP-Link Community at https://community.tp-link.com.

If you have any suggestions or needs for our product guides, you are welcome to email techwriter@tp-link.com.cn.

For technical support, replacement services, user manuals and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.

Models: AX1500/AX1800/AX3000 Wi-Fi 6 Range Extender

Model Numbers: RE500X/RE600X/RE700X