AIPER Scuba S1 Pro Cordless Robotic Pool Cleaner Instruction Manual

Produit terminéview

The AIPER Scuba S1 Pro is an advanced cordless robotic pool cleaner designed for efficient and thorough cleaning of in-ground pools up to 2,150 sq.ft. Featuring WavePath Navigation 2.0, double filtration, and smart app control, it ensures pristine pool water with extended battery life.

The AIPER Scuba S1 Pro, a cordless robotic pool cleaner, ready for operation.

Caractéristiques principales

• Double filtration : Equipped with an extra replaceable 3-micron ultra-fine filter and a standard 180-micron filter to capture fine debris.
• Extended 180-Min Battery Life: Provides long cleaning sessions for larger pools.
• Navigation WavePath 2.0 : Intelligent navigation for efficient and systematic cleaning routes.
• Smart App Control & OTA Upgrades: Full control via app with continuous improvements and new features.
• Horizontal Waterline Cleaning: Industry-first technology for comprehensive pool cleaning.

Installation et première utilisation

Déballage

Carefully remove all components from the packaging. Ensure all accessories, including the retriever hook and charger, are present. The main unit is protected by plastic wrapping.

Installation du filtre

The cleaner comes with a large filter basket and an extra 3-micron ultra-fine filter. Ensure both are correctly installed before use. The filter basket features a lever design to prevent debris from escaping when removed from the pool.

Détaillé view of the 180µm standard filter and the 3µm ultra-fine filter for advanced particle filtration.

Chargement

Connect the provided charger to the unit. A full charge takes approximately 4 hours, providing up to 180 minutes of cleaning time.

Placing in Pool

Submerge the cleaner in the pool. The unit will release air bubbles as it sinks. Once fully submerged, it is ready to operate.

Modes de fonctionnement

The Scuba S1 Pro offers multiple cleaning modes to suit your pool's needs:

• Mode étage uniquement : Cleans only the pool floor using an 'S' pattern.
• Mode mur uniquement : Cleans only the pool walls using an 'N' pattern (accessible via Aiper app).
• Mode ligne de flottaison : Specifically targets the horizontal waterline to remove oily films, limescale, and algae.
• Mode automatique: Automatically cleans both the floor and walls, self-parking when battery is low.
• Mode écologique: Energy-efficient cleaning mode, ideal for regular maintenance.

The robotic cleaner utilizing WavePath Navigation 2.0 for efficient cleaning coverage.

Contrôle intelligent des applications

Control your cleaner and receive OTA updates via the Aiper app. Note: App control is only available when the pool cleaner is out of the pool. After selecting a cleaning mode, immediately submerge the device to prevent shutdown.

A smartphone displaying the Aiper app interface for controlling the Scuba S1 Pro.

Entretien

Nettoyage du filtre

After each cleaning cycle, remove the filter basket and rinse it thoroughly. The unique design prevents debris from spilling back into the pool.

A user cleaning the filter basket with a hose, demonstrating the ease of maintenance.

Quick Water Release

The cleaner is designed for quick water release, making it lighter and easier to remove from the pool after use.

A user lifting the robotic cleaner from the pool, showing water quickly draining from the unit.

Dépannage

If the cleaner is not performing as expected, ensure the filter basket is clean and properly installed. Check for any obstructions in the suction ports or brushes. Refer to the user manual for specific error codes or further assistance.

Caractéristiques

Garantie et assistance

This robotic pool cleaner comes with a 90-day limited warranty. For support or warranty claims, please refer to the contact information provided in your product packaging or visit the official AIPER website.