YATINEY BT18DBR Bar Table with LED Lights Instruction Manual

1. Introduction

Merci pour votre achatasing the YATINEY BT18DBR Bar Table with LED Lights. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar table. Please read these instructions carefully before use and retain them for future reference.

Figure 1.1: YATINEY BT18DBR Bar Table with LED Lights.

2. Consignes de sécurité

Pour garantir une utilisation en toute sécurité et éviter tout dommage, veuillez respecter les consignes de sécurité suivantes :

• Kit anti-basculement : Always install the provided anti-tip kit to secure the table to a wall, especially if it will be placed in an area with children or pets, or if it will bear heavy loads.
• Capacité de poids : Do not exceed the maximum recommended weight capacity for the tabletop. Distribute weight evenly.
• Stabilité: Ensure the table is placed on a flat, stable surface. Adjust the leveling feet as needed to prevent wobbling.
• Sécurité électrique : The LED light strip requires a USB adapter (included). Use only the provided adapter or a compatible USB power source. Do not expose the light strip or adapter to water or excessive moisture.
• Assemblée: Follow all assembly instructions carefully. Do not overtighten screws. Ensure all connections are secure before use.
• Enfants: Pendant le montage, tenez les petites pièces et les matériaux d'emballage hors de portée des enfants.

3. Configuration et assemblage

The YATINEY BT18DBR Bar Table is designed for easy assembly. All necessary tools and components are included.

3.1 Composants inclus

• 1 x Suspended Bar Table (disassembled parts)
• Bande lumineuse 1 x LED
• 1 x Accessory Kit (screws, hex bolts, leveling feet, anti-tip kit)
• 1 x Guide d'assemblage
• 1 x USB Adapter for LED strip

3.2 Instructions de montage

1. Unpack all components and verify against the parts list in the included Assembly Guide.
2. Attach the legs to the main frame using the provided screws.
3. Tighten all screws using the provided tool, ensuring a snug fit without overtightening.
4. Insert tabletop support brackets into the pre-drilled holes on the frame.
5. Secure the legs to the brackets using the included hex bolts.
6. Carefully flip the table upright once all connections are secure.
7. Install the LED light strip according to the separate instructions provided with the strip.
8. Attach the anti-tip kit to the table and wall as per the safety instructions.

Figure 3.1: Product Dimensions for Assembly Reference.

Figure 3.2: Detail of Reinforced Metal Frame Connection.

4. Fonctionnement des lumières LED

The integrated LED light strip offers customizable lighting to enhance your environment.

4.1 Mise sous/hors tension

Connect the LED light strip's USB cable to the provided USB adapter, then plug the adapter into a standard wall outlet. The lights can be turned on or off using the remote control, the mode key on the cable, or the dedicated app.

Méthodes de contrôle 4.2

• Télécommande: Use the included remote to change colors, adjust brightness, select lighting modes, and control music synchronization.
• Touche de mode : A physical button on the LED strip's cable allows for basic mode cycling and power control.
• Application Bluetooth : Download the recommended app (details in the LED strip's separate guide) to connect via Bluetooth. The app provides advanced control over colors, effects, music synchronization, and timing functions.

Figure 4.1: LED Light Control Options (App and Remote).

Figure 4.2: Bar Table with LED Lights in use.

5. Entretien

Un entretien approprié prolongera la durée de vie et préservera l'apparence de votre table de bar.

• Nettoyage: Wipe the table surfaces with a dry cloth. For stubborn marks, use a slightly damp cloth with a mild, non-abrasive cleaner, then dry immediately. Avoid harsh chemicals.
• Déversements : Clean up spills immediately to prevent staining, especially on the particleboard surfaces.
• Inspection: Vérifiez régulièrement le serrage de toutes les vis et fixations. Resserrer si nécessaire.
• Lumières LED : Ensure the LED strip and its connections are free from dust and debris. Do not attempt to repair damaged LED strips; contact customer support for replacement.
• Environnement: This table is designed for indoor use only. Avoid prolonged exposure to direct sunlight or extreme humidity.

6. Dépannage

If you encounter issues with your YATINEY Bar Table, refer to the following common solutions:

6.1 Table Stability Issues

• Vacillement: Check that all assembly screws are securely tightened. Ensure the table is on a level surface. Adjust the leveling feet at the bottom of the legs to compensate for uneven floors.
• Kit anti-basculement : Verify that the anti-tip kit is correctly installed and securely fastened to both the table and the wall.

6.2 Problèmes liés à l'éclairage LED

• Les lumières ne s'allument pas :
  • Ensure the USB adapter is properly plugged into a working power outlet.
  • Check that the USB cable from the LED strip is securely connected to the adapter.
  • Verify the LED strip itself is properly connected to its controller.
  • Try using a different USB power source to rule out adapter failure.
• La télécommande ne fonctionne pas :
  • Vérifiez la pile de la télécommande et remplacez-la si nécessaire.
  • Assurez-vous qu'aucun obstacle ne se trouve entre la télécommande et le récepteur LED.
• Bluetooth App Connectivity Issues:
  • Assurez-vous que Bluetooth est activé sur votre smartphone.
  • Redémarrez l'application et essayez de vous reconnecter.
  • Unplug and replug the LED strip power to reset the Bluetooth module.

7. Spécifications

8. Garantie et assistance

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the YATINEY official webVeuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.

Politique de retour: This product is eligible for a 30-day refund or replacement policy from the date of purchase, subject to the retailer's terms and conditions.