We-Vibe Temp Lay-On Vibrator User Manual

Introduction

Thank you for choosing the We-Vibe Temp Lay-On Vibrator. This device is designed to provide unique sensations through its heating and cooling functions, combined with powerful vibrations. Please read this manual thoroughly before use to ensure safe and optimal operation.

Consignes de sécurité

• This device is intended for external use only.
• Ne pas utiliser si l'appareil semble endommagé ou compromis.
• Nettoyez soigneusement l'appareil avant et après chaque utilisation, comme indiqué dans la section Entretien.
• À utiliser uniquement avec des lubrifiants à base d'eau. Les lubrifiants à base d'huile risquent d'endommager le silicone.
• Tenir hors de portée des enfants.
• En cas d'inconfort ou d'irritation, cessez immédiatement l'utilisation.
• Consult a healthcare professional if you have any medical conditions or concerns regarding use.

Contenu du colis

The We-Vibe Temp package includes:

• We-Vibe Temp Lay-On Vibrator
• Câble de chargement USB
• Manuel de l'utilisateur (ce document)
• Pochette de rangement (peut varier selon la région)

Produit terminéview

The We-Vibe Temp features an ergonomic design with intuitive controls for vibration, heating, and cooling functions.

Image: We-Vibe Temp device with its control buttons and charging port clearly indicated. The buttons are for heat, cool, and vibration, and the device is shown with a magnetic charging cable attached.

• Power/Vibration Button: Controls power on/off and cycles through vibration patterns and intensities.
• Bouton de chauffage : Active la fonction de chauffage.
• Bouton Cool : Active la fonction de refroidissement.
• Temperature Plate: The metallic surface on the device that provides heating and cooling sensations.
• Port de charge : Magnetic port for USB charging cable.

Chargement

Before first use, fully charge your We-Vibe Temp. A full charge typically takes approximately 90 minutes and provides up to 90 minutes of use, depending on the settings.

1. Connect the magnetic end of the USB charging cable to the charging port on the device.
2. Connectez l'extrémité USB-A du câble à un adaptateur secteur USB (non inclus) ou au port USB d'un ordinateur.
3. The indicator light on the device will pulse while charging and remain solid when fully charged.
4. Débranchez le chargeur une fois complètement chargé.

Installation

Ensure the device is fully charged before initial use. Clean the device as per the "Cleaning and Maintenance" section.

Image: A hand holding the We-Vibe Temp, emphasizing its ergonomic shape and soft-touch silicone material, along with its waterproof capabilities.

For optimal experience, apply a generous amount of water-based lubricant to the device and the desired area of the body.

Mode d'emploi

Power On/Off and Vibration Control

1. To turn on, press and hold the Power/Vibration button for 2 seconds. The device will start vibrating at the lowest setting.
2. Press the Power/Vibration button repeatedly to cycle through 3 vibration intensities and 3 vibration patterns.
3. To turn off, press and hold the Power/Vibration button for 2 seconds.

Fonction de chauffage

Image: The We-Vibe Temp device illustrating its temperature capabilities, with indicators for 38°C (100°F) warming and 20°C (68°F) cooling.

1. Press the Heat button to activate the warming function. The temperature plate will begin to warm up.
2. The device can reach a warming temperature of approximately 38°C (100°F).
3. Press the Heat button again to turn off the warming function.

Fonction de refroidissement

1. Press the Cool button to activate the cooling function. The temperature plate will begin to cool down.
2. The device can reach a cooling temperature of approximately 20°C (68°F).
3. Press the Cool button again to turn off the cooling function.

You can use the vibration, heating, and cooling functions independently or in combination for varied sensations.

Nettoyage et entretien

Proper cleaning and maintenance ensure hygiene and prolong the lifespan of your We-Vibe Temp.

1. Nettoyez soigneusement l'appareil avant et après chaque utilisation.
2. Wash the device with warm water and a mild soap or a specialized toy cleaner.
3. Rincer abondamment à l'eau claire.
4. Dry completely with a lint-free cloth.
5. N’utilisez pas de produits nettoyants contenant de l’alcool, du pétrole ou de l’acétone, car ils peuvent endommager le silicone.
6. The device is 100% waterproof (IPX7 rated) and can be rinsed under running water or submerged for cleaning.

Stockage

Store your We-Vibe Temp in a clean, dry, and dust-free environment, away from direct sunlight and extreme temperatures. Keep it separate from other toys made of different materials to prevent potential damage or reactions.

Dépannage

Si les étapes de dépannage ne résolvent pas le problème, veuillez contacter le service client.

Caractéristiques

• Numéro de modèle : 4251460626101
• Matériel: Silicone sans danger pour le corps
• Dimensions: 3.94 x 6.3 x 2.76 pouces
• Poids: 12.2 onces
• Batterie: Batterie rechargeable non standard (incluse)
• Temps de charge : Environ 90 minutes
• Durée d'exécution : Up to 90 minutes (depending on settings)
• Résistance à l'eau : IPX7 (100 % étanche)
• Température de réchauffement : Jusqu'à 38 °C (100 °F)
• Température de refroidissement: Down to 20°C (68°F)
• Fabricant: WOW Tech

Informations sur la garantie

We-Vibe products are manufactured to the highest quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official We-Vibe webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.

Assistance clientèle

If you have any questions, concerns, or require assistance with your We-Vibe Temp, please contact We-Vibe customer support through their official website ou les coordonnées fournies dans l'emballage de votre produit.

Website: www.we-vibe.com