Manuel d'utilisation du système de microphone sans fil double LENSGO 528C

1. Introduction

This manual provides detailed instructions for the LENSGO 528C Dual Wireless Microphone System. Designed for content creators, this system offers clear, professional audio for cameras and USB-C compatible smartphones. It features noise reduction, real-time monitoring, and a plug-and-play setup for various recording environments.

2. Contenu du colis

Veuillez vérifier que tous les articles énumérés ci-dessous sont inclus dans votre colis. Si des articles sont manquants ou endommagés, veuillez contacter votre revendeur.

For Android + Apple Smartphones Configuration:

• Étui de chargement
• TX (Transmitter) x2
• RX (Receiver) x2
• Câble de chargement

For Android Phones + Camera Configuration:

• Étui de chargement
• TX (Transmitter) x2
• RX (Receiver) x2
• Câble de caméra
• Câble de chargement

3. Guide de configuration

3.1 Chargement du système

Before initial use, fully charge the transmitters (TX) and receivers (RX) using the provided charging cable. Place the TX and RX units into the charging case. A full charge typically takes approximately 1 hour and provides up to 6 hours of working time.

3.2 Appairage automatique

The LENSGO 528C system is designed for convenience. Simply remove the transmitters and receivers from the charging case, and they will automatically power on and pair with each other. No manual pairing steps are typically required.

3.3 Connexion à votre appareil

The LENSGO 528C offers wide compatibility:

• Pour les smartphones (USB-C) : Connect the receiver directly to your smartphone's USB-C port.
• For Cameras (DSLR, Camcorders): Use the provided camera cable to connect the receiver to your camera's 3.5mm audio input jack.

Ensure the connection is secure before beginning your recording.

4. Mode d'emploi

4.1 Dual-Channel Recording

The system supports dual-channel recording, allowing you to capture audio from two separate sources simultaneously. This is ideal for interviews, podcasts with multiple speakers, or presentations.

4.2 Surveillance en temps réel

Connect headphones to the receiver's monitoring port (if available) to listen to the audio in real-time while recording. This ensures optimal audio levels and quality throughout your session.

4.3 Réduction du bruit

The LENSGO 528C features intelligent noise reduction technology. This function automatically minimizes ambient noise, signal undercurrent, and bottom noise, resulting in clearer vocal recordings even in challenging environments.

4.4 Reverb Function

To activate or deactivate the reverb effect, double-click the designated button on the transmitter. When the reverb function is active, a red indicator light will illuminate. When off, the light will be off.

4.5 Stable Transmission

The LENSGO 528C utilizes a 2.4G wireless transmission chip, providing stable audio transmission over distances of up to 50 meters in open and unobstructed environments. This ensures reliable performance even in areas with complex wireless signals.

4.6 High Definition Pickup

The microphone is designed for 360° omnidirectional pickup, receiving sound from all directions with equal volume. This provides a wider range of sound capture, suitable for various recording scenarios.

5. Entretien

• Nettoyage: Use a soft, dry cloth to clean the microphone units and charging case. Avoid using harsh chemicals or abrasive materials.
• Stockage: Store the system in its charging case in a cool, dry place when not in use. Avoid extreme temperatures and humidity.
• Entretien de la batterie: To prolong battery life, avoid fully discharging the units frequently. Charge them regularly, even if not in constant use.

6. Dépannage

• Pas de sortie audio :
  • Ensure both TX and RX units are powered on and paired.
  • Check all cable connections to your recording device.
  • Verify that the recording device's audio input is correctly selected and its volume is not muted.
  • Ensure the TX unit is properly clipped and facing the sound source.
• Mauvaise qualité audio/Interférences :
  • Move closer to the receiver to reduce transmission distance.
  • Avoid environments with strong Wi-Fi signals or other 2.4G devices that may cause interference.
  • Ensure the noise reduction function is appropriately enabled or disabled based on your environment.
  • Vérifiez l'absence d'obstructions physiques entre l'émetteur et le récepteur.
• Appareils ne chargeant pas :
  • Ensure the charging cable is securely connected to a power source and the charging case.
  • Verify that the charging case itself has power (check indicator lights).
  • Clean the charging contacts on both the units and the case.

7. Spécifications

8. Garantie et assistance

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official LENSGO webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.