1. Introduction
The FNIRSI FPM-02 is a high-precision 3-in-1 environmental monitor designed for measuring illuminance (lux), temperature, and humidity. It features a 2-inch color display for clear data visualization and is suitable for various professional applications including office lighting assessment, horticulture, laboratories, and photography studios.
2. Contenu de la boîte
- FNIRSI FPM-02 Environmental Monitor
- Câble USB
- Mallette de transport
- Manuel d'utilisation
3. Principales caractéristiques
- Mesure 3 en 1 : Monitors Lux, temperature, and humidity simultaneously.
- Écran couleur de 2 pouces : High-definition display with light and dark theme modes for optimal readability.
- Real-time Data & Curve Recording: Visualizes environmental changes over time.
- Adjustable Alarm Thresholds: Alerts users when measurements exceed set values.
- Rapide SampTaux de ling: 20Hz (50ms) for real-time monitoring.
- Dual-language Interface: Prend en charge l'anglais et le chinois.
- Built-in Sleep Mode & Data Logging: Enhances battery efficiency and usage tracking.
Figure 1: FNIRSI FPM-02 Environmental Monitor with key features highlighted on its color screen.
4. Installation
4.1 Chargement de l'appareil
- Connect the provided USB cable to the FNIRSI FPM-02's charging port.
- Branchez l'autre extrémité du câble USB à un adaptateur secteur USB standard (non inclus) ou au port USB d'un ordinateur.
- L'appareil affichera l'état de charge sur son écran. Une charge complète prend généralement entre 2 et 3 heures.
4.2 Mise sous/hors tension
- To power on: Press and hold the Power button (usually located on the side or front panel) until the screen illuminates.
- Pour éteindre l'appareil : maintenez le bouton Marche/Arrêt enfoncé jusqu'à ce que l'appareil s'éteigne.
5. Mode d'emploi
5.1 Navigation dans l'interface
The FPM-02 features a user-friendly interface with a 2-inch HD color screen. Use the navigation buttons (up, down, left, right, OK/Enter) to move through menus and select options. The device supports both English and Chinese languages, which can be selected in the settings menu.
5.2 Taking Measurements (Illuminance, Temperature, Humidity)
Upon powering on, the device typically defaults to the main measurement screen, displaying real-time values for illuminance (Lux/FC), temperature (°C/°F), and relative humidity (%).
- Éclairement: Ensure the light sensor (located at the top of the device) is unobstructed and pointed towards the light source or area to be measured. The device will display the light intensity in LUX or FC.
- Température et humidité : The internal sensors continuously monitor ambient temperature and humidity. Allow a few minutes for readings to stabilize after significant environmental changes.
5.3 Real-time Data and Curve Recording
The device can display real-time data and record changes over time, presenting them as a curve. Access this feature through the main menu to visualize trends and fluctuations in environmental conditions.
5.4 Réglage des seuils d'alarme
You can set custom alarm thresholds for Lux, temperature, and humidity. If a measured value exceeds or falls below the set threshold, the device will trigger an alert. Refer to the device's settings menu to configure these thresholds.
5.5 Sleep Mode and Data Logging
To conserve battery, the device features a configurable sleep mode. It also includes data logging capabilities, allowing you to store measurement data for later review and analysis. Consult the user manual for detailed instructions on activating and managing these functions.
6. Entretien
- Nettoyage: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents. Ensure the light sensor and display are kept clean for accurate readings.
- Stockage: Rangez l'appareil dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes. En cas de stockage prolongé, assurez-vous que la batterie est partiellement chargée (environ 50 %) afin d'en prolonger la durée de vie.
- Entretien de la batterie: Avoid fully discharging the lithium battery frequently. Recharge the device when the battery level is low.
7. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| L'appareil ne s'allume pas. | Batterie faible ou déchargée. | Chargez l'appareil à l'aide du câble USB fourni. |
| Lectures inexactes. | Sensor obstructed or dirty; device not calibrated. | Clean sensors. Ensure proper placement. If issues persist, contact support. |
| L'écran ne répond pas. | Bug logiciel ; température extrême. | Restart the device. Ensure operating within specified temperature range. |
8. Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Numéro de modèle | FPM-02 |
| Plage d'éclairement | 0–1000 / 9999 / 99990 LUX; 10–1000 / 1000 / 10000 FC |
| Résolution d'éclairement | 0.1 LUX (0–1000); 0.1 FC (10–1000) |
| Précision de l'éclairement | ±(3% + 5 LUX) with standard incandescent lamp (2854°K); ±(6% + 5 LUX) for other light sources |
| Sample temps | 20 Hz (50 ms) |
| Afficher | 2″ HD Color Screen |
| Source d'énergie | Batterie au lithium 3.7 V / 1500 mAh |
| Dimensions de l'appareil | 63 × 28 × 182 mm |
| Poids | 205g |
| Couleur | Noir et bleu |
| Pays d'origine | Chine |
9. Garantie et assistance
This FNIRSI FPM-02 Environmental Monitor comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.