Introduction
Thank you for choosing the Coleshome Multifunctional Dresser. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and efficient use of your new furniture. Please read this manual thoroughly before assembly and retain it for future reference.
Configuration et assemblage
Before beginning assembly, ensure all parts are present and undamaged. Refer to the included parts list. Assembly typically requires two people. A Phillips head screwdriver and a hammer (not included) may be needed in addition to the provided tools.
Déballage
- Retirez soigneusement tous les composants de l'emballage.
- Placez les composants sur une surface douce et propre pour éviter les rayures.
- Verify all parts against the parts list. If any parts are missing or damaged, contact customer service immediately.
Étapes d'assemblage
- Assemblage du cadre : Assemble the metal frame components according to the diagrams. Ensure all screws are tightened securely.
- Fabric Drawer Installation: Insert the fabric drawers into their designated slots. Ensure they slide smoothly.
- Clothes Rail Attachment: Securely attach the clothes rail to the frame using the provided hardware.
- Installation de la bande LED : Adhere the LED strip along the designated area of the clothes rail section. Connect the power cable.
- Power Outlet Unit Installation: Install the integrated power outlet unit into the tabletop. Connect the power cable to a wall outlet.
- Pieds réglables: Adjust the feet at the base of the dresser to ensure stability on uneven surfaces.
- Installation du kit anti-basculement : For safety, attach the anti-tip kit to the dresser and secure it to a wall stud. This is crucial to prevent accidental tipping, especially in households with children or pets.
Image : Terminéview of the dresser's multifunctional design, highlighting its storage components.
Image: Close-up of adjustable feet, side hooks, support bars, and the anti-tip mechanism for enhanced stability and safety.
Mode d'emploi
Système d'éclairage à DEL
The integrated RGB LED strip offers customizable lighting options.
- Marche/Arrêt : Utilisez la commande intégrée pour allumer ou éteindre les LED.
- Sélection de couleur : Cycle through 10 static colors using the controller.
- Modes dynamiques : Choose from 10 dynamic lighting modes for various effects.
- Réglage de la luminosité : Réglez la luminosité sur 7 niveaux selon vos préférences.
- Fonction mémoire : The system retains your last setting even after being powered off.
Image: The dresser with its LED lighting active, showcasing its use in a room setting.
Image: Visual representation of the LED lighting system's various modes and functions.
Station de recharge intégrée
The dresser includes a convenient charging station for your electronic devices.
- Prises secteur : Features 3 AC power outlets (220-250V/15A) for larger electronics.
- Ports USB : Includes 2 USB ports (5V/2A) for charging phones, tablets, and other USB-powered devices.
- Usage: Simply plug your devices into the appropriate outlets. Ensure the dresser's main power cable is connected to a functional wall outlet.
Image: Detail of the charging station, showing AC outlets and USB ports in use.
Image: Specifications and features of the integrated power strip.
Conception réversible
The dresser's design allows for flexible placement of the clothes rail and drawer sections.
- The clothes rail section can be assembled on either the left or right side of the drawer unit to best fit your room layout.
- Refer to the assembly instructions for specific steps on reversing the configuration.
Image: Illustration of the reversible design, showing the clothes rail configurable on either side.
Entretien et soins
Nettoyage
- Cadre: Essuyez le cadre métallique avec un chiffon doux et sec.amp chiffon. Évitez les nettoyants abrasifs.
- Tiroirs en tissu : Nettoyez les tiroirs en tissu localement avec un détergent doux et ajoutezamp En tissu. Laisser sécher complètement à l'air libre. Ne pas laver en machine.
- Composants électriques : Ensure the unit is unplugged before cleaning near the power outlets or LED strip. Use a dry cloth to wipe these areas.
Soins généraux
- Vérifiez régulièrement toutes les vis et les fixations pour vous assurer qu'elles restent bien serrées.
- Avoid placing excessively heavy items on the top surface or in the drawers.
- Do not expose the dresser to direct sunlight or extreme humidity for prolonged periods.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Les lumières LED ne s'allument pas. | Power cable not connected; LED strip damaged; controller malfunction. | Ensure the power cable is securely plugged into a working outlet. Check connections of the LED strip. If issues persist, contact customer service. |
| Prises de courant/ports USB non fonctionnels. | Dresser not plugged in; power surge; internal wiring issue. | Verify the dresser's main power cable is plugged into a live wall outlet. Test the wall outlet with another device. Avoid overloading the outlets. If still not working, contact customer service. |
| La commode est bancale. | Sol inégal ; connexions desserrées ; pieds réglables mal réglés. | Adjust the leveling feet at the bottom of the dresser. Ensure all assembly screws are tightened. Confirm the anti-tip kit is securely installed. |
| Les tiroirs ne coulissent pas facilement. | Improper installation; obstruction; overloaded drawer. | Ensure drawers are inserted correctly. Check for any items obstructing the drawer path. Do not overload drawers beyond their capacity. |
Caractéristiques
- Marque: Coleshome
- Numéro de modèle : Coleshome-44-356
- Couleur: Blanc
- Dimensions du produit (L x l x H) : 30 x 110 x 105 cm
- Poids de l'article : 12 kilogrammes
- Matériel: Metal frame, Fabric drawers
- Type d'installation : Freestanding
- Style: Moderne
- Nombre d'étagères : 1 (base shelf)
- Utilisations recommandées : Clothes, Shoes, Accessories
- Assemblage requis : Oui
- Éclairage LED : RGB, 10 static colors, 10 dynamic modes, 7 brightness levels, memory function
- Prises de courant: 3 AC outlets (220-250V/15A), 2 USB ports (5V/2A)
Image: Technical drawing with precise dimensions of the dresser.
Informations sur la garantie
Coleshome offers a 30-day return and exchange guarantee from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use. It does not cover damage caused by misuse, accidents, or unauthorized modifications.
Assistance clientèle
For any questions, concerns, or assistance with your Coleshome dresser, please do not hesitate to contact our customer service team.
- Our professional customer service team is available online 24/7.
- Please refer to your purchase documentation or the Coleshome official website pour les coordonnées.