Introduction
Thank you for choosing the DUDUPET 5L Automatic Cat Feeder. This device is designed to provide a consistent and convenient feeding routine for your pets, ensuring they receive meals on time with precise portion control. Please read this manual carefully before use to ensure proper operation and maintenance.
Qu'y a-t-il dans la boîte
- Unité principale du distributeur automatique de nourriture pour animaux
- Food Tank (5L capacity)
- Gamelle (amovible)
- Adaptateur secteur 5V DC
- Sac déshydratant
- Manuel d'utilisation

Image: All components of the DUDUPET Automatic Cat Feeder, including the main unit, food tank, food bowl, power adapter, and desiccant bag.
Video: An unboxing demonstration of the DUDUPET Automatic Cat Feeder, showing all included parts and accessories.
Installation
- Install Rotating Component: Insert the rotating component into the base unit.
- Rotate Blade to Locked Position: Ensure the slots of the rotor component are aligned with the base, then manually rotate the three-blade until it is securely locked in place and cannot move.
- Assemble Food Tank: Place the 5L food tank onto the base unit, aligning the locking mechanisms.
- Lock Food Tank: Gently rotate the food tank clockwise until it clicks into the locked position.
- Installer le déshydratant : Open the desiccant box located on the underside of the lid and insert the provided desiccant bag. Close the box securely.
- Installer le couvercle : Place the lid onto the food tank and rotate it to lock it in place.
- Connectez l'alimentation : Plug the 5V DC adapter into the feeder and a wall outlet. For uninterrupted operation, install 3 D-cell batteries (not included) in the battery compartment on the bottom of the unit.

Image: Step-by-step visual guide for assembling the DUDUPET Automatic Cat Feeder, including rotor, food tank, and lid installation.
Video: A detailed guide on how to install and power on the automatic pet feeder, demonstrating each step of the assembly process.

Image: The DUDUPET Automatic Cat Feeder showcasing its dual power supply options: a 5V DC adapter and a battery compartment for D-cell batteries.
Mode d'emploi
1. Réglage de l'heure actuelle
- Appuyez et maintenez enfoncé le ENSEMBLE button for 3 seconds to enter time setting mode. The hour display will flash.
- Utilisez le UP et VERS LE BAS boutons pour régler l'heure.
- Presse ENSEMBLE again to switch to minute setting, then use UP et VERS LE BAS pour régler les minutes.
- Presse ENSEMBLE pour confirmer et quitter.
2. Programmation des horaires d'alimentation
- Presse ENSEMBLE to cycle through meal settings (Meal 1 to Meal 6).
- When a meal time is flashing, use UP et VERS LE BAS to set the desired feeding time.
- Presse ENSEMBLE to move to portion setting. Use UP et VERS LE BAS sélectionner 1 à 20 portions.
- Repeat for up to 6 meals. Press ENSEMBLE pour sauvegarder et quitter.

Image: Close-up of the DUDUPET Automatic Cat Feeder's intuitive LCD screen and control buttons for easy setup and programming.
Video: A demonstration of how to set up a simple and easy timed feeding schedule on the pet feeder.
3. Alimentation manuelle
- To manually dispense one portion of food, press both the UP et VERS LE BAS boutons simultanément.
4. Mécanisme de verrouillage
- Appuyez et maintenez enfoncé le VERROUILLAGE button for 3 seconds to lock or unlock the control panel. This prevents accidental changes to settings or pets from feeding themselves.

Image: The DUDUPET Automatic Cat Feeder featuring an anti-tip design and a secure, lockable lid to keep pet food safe and prevent accidental spills.
Entretien et nettoyage
- All food-contact components, including the food tank and food bowl, are detachable and washable.
- To clean, detach the food tank and bowl from the main unit. Wash them with mild soap and water, then rinse thoroughly and dry completely before reassembling.
- The main unit should PAS ne peut être lavé ni immergé dans l'eau. Essuyez-le avec un chiffon doux.amp tissu.
- Replace the desiccant bag every 30 days to maintain food freshness.

Image: The DUDUPET Automatic Cat Feeder disassembled, showing the detachable food tank and bowl being washed in a sink, highlighting its easy-to-clean design.
Dépannage
- Distribution de nourriture non assurée : Check if the food tank is properly installed and locked. Ensure there is enough food in the tank. Verify that the kibble size is between 0.07 to 0.55 inches (2-15mm) to prevent jamming.
- Incorrect Portions: Adjust the portion settings in the programming menu. Note that 1 portion is approximately 0.62 oz (3 Tbsp / 0.2 cup) for 0.35-0.39 inch pellets.
- Le distributeur ne s'allume pas : Ensure the power adapter is securely plugged into both the feeder and a working outlet. If using batteries, check that they are correctly installed and not depleted.
- Les paramètres ne sont pas enregistrés : Assurez-vous d'appuyer sur le ENSEMBLE button to confirm and save changes after adjusting time or meal settings.
Réinitialisation d'usine
- To restore the feeder to factory settings, press and hold the UP button for 6 seconds. You will hear a