PINDOWS Slim Minimalist Quartz Analog Watch User Manual

Introduction

Thank you for choosing the PINDOWS Slim Minimalist Quartz Analog Watch. This manual provides essential information for the proper setup, operation, and maintenance of your new timepiece. Designed for elegance and everyday wear, this watch features a reliable Japanese quartz movement and a comfortable leather strap. Please read this manual thoroughly to ensure optimal performance and longevity of your watch.

Image : Avant view of the PINDOWS Slim Minimalist Quartz Analog Watch with a gold-tone case and black leather strap.

Installation

Réglage de l'heure

Your PINDOWS watch is equipped with a single crown for time adjustment. Follow these steps to set the correct time:

1. Gently pull the crown located on the side of the watch case outwards to the first position. You may feel a slight click.
2. Rotate the crown clockwise or counter-clockwise to move the hour and minute hands until the desired time is displayed.
3. Une fois l'heure réglée, repoussez la couronne dans sa position initiale contre le boîtier. Cela mettra le mouvement de la montre en marche.

Image : Un gros plan view of the watch case highlighting the crown and an arrow indicating to pull it out for time adjustment.

Ajustement de la sangle

The black leather strap is designed for comfort and adjustability. To ensure a proper fit:

• Unbuckle the strap and place the watch on your wrist.
• Thread the end of the strap through the buckle and select a hole that provides a snug yet comfortable fit. The watch should not slide freely on your wrist but also not feel too tight.
• Secure the strap by inserting the buckle pin into the chosen hole. Use the two strap loops to secure the excess strap end.

Image: A PINDOWS watch with a black leather strap worn on a wrist, demonstrating a comfortable fit.

Opérationnel

Chronométrage

Your PINDOWS watch utilizes a precise Japanese quartz movement to provide accurate timekeeping. Once the time is set, the watch will continuously display the current hour, minute, and second.

Luminous Dial Function

The watch features a full luminous dial, allowing for clear visibility in low-light conditions. To activate the luminosity:

• Expose the watch dial to a bright light source, such as sunlight or strong indoor lighting, for at least 30 minutes.
• The luminous material on the dial will absorb the light energy and glow in the dark, providing temporary illumination. The duration and intensity of the glow depend on the exposure time and intensity of the light source.

Image: The PINDOWS watch dial illuminated with a green glow in a dark environment, demonstrating its luminous feature.

Image: A split image showing the watch near water with a "30M Water Resistant" label and the luminous dial glowing in the dark with a "Luminous Dial" label.

Entretien

Résistance à l'eau

This watch is rated for 30 meters (3 ATM) of water resistance. This means it is suitable for daily use and can withstand splashes, rain, and hand washing. It is pas Convient pour la natation, la plongée, la douche ou toute activité impliquant une immersion prolongée dans l'eau ou une exposition à l'eau sous haute pression.

• Ne pas actionner la couronne lorsque la montre est mouillée ou immergée dans l'eau.
• If the watch comes into contact with saltwater, rinse it gently with fresh water and dry it thoroughly with a soft cloth.

Nettoyage

Pour préserver l'apparence de votre montre :

• Essuyez le boîtier et le verre de la montre avec un chiffon doux, sec et non pelucheux.
• For the leather strap, avoid prolonged exposure to direct sunlight, extreme temperatures, and moisture, as these can cause the leather to dry out, crack, or discolor. Clean the strap with a slightly damp Essuyez avec un chiffon et laissez sécher complètement à l'air libre.
• Avoid using chemical cleaners, solvents, or abrasive materials on any part of the watch.

Remplacement de la batterie

The watch is powered by a long-lasting quartz battery. When the watch stops running, it indicates that the battery needs to be replaced. Battery replacement should be performed by a qualified watch technician to ensure the water resistance seal is maintained and to prevent damage to the movement.

Dépannage

Caractéristiques

Image: A detailed diagram illustrating the dimensions of the PINDOWS watch, including case size (32mm), strap/lug width (14mm), case thickness (8mm), and the adjustable wrist circumference range.

Image : Un côté profile view of the PINDOWS watch, emphasizing its slim 8mm case thickness compared to a phone.

Image : L'arrière view of the PINDOWS watch, displaying the stainless steel back cover which is corrosion-resistant and tightly sealed, along with the model number PDS-652.

Garantie et assistance

PINDOWS watches are manufactured with attention to quality and detail. For specific warranty terms and conditions, please refer to the warranty card or documentation included with your purchase. In most cases, warranty coverage addresses manufacturing defects.

For technical support, service, or warranty claims, please contact PINDOWS customer service through the retailer where the product was purchased or visit the official PINDOWS website for contact information. Please have your model number (PDS-652) and proof of purchase ready when contacting support.

Remarque : Les réparations ou modifications non autorisées peuvent annuler votre garantie.