Introduction
The ROFAVEZCO USB 3.2 70m 4-Port Extender allows you to extend USB 3.0 signals up to 70 meters (230 feet) over a single Cat5e or Cat6 Ethernet cable. This device is designed for applications requiring remote USB connectivity, such as offices, surveillance systems, and home entertainment setups. It features a 4-port USB 3.0 hub on the receiver unit, supporting data transfer speeds of up to 5 Gbps. The extender also supports Power over Ethernet (PoE) for simplified installation and is plug-and-play compatible with Windows, macOS, Android, and Linux operating systems, requiring no additional drivers.
The transmitter unit is powered by your PC, while the receiver unit utilizes an efficient 24V 2A power adapter for reliable, energy-saving operation.
Contenu du colis
Veuillez vérifier que tous les articles sont présents dans votre colis :
- 1x USB 3.2 Extender Transmitter (TX) Unit
- 1x USB 3.2 Extender Receiver (RX) Unit
- 1 adaptateur secteur 24 V 2 A
- 1 câble USB-C vers C
- 4x oreilles de montage
- 1x Manuel d'utilisation
Figure 1 : Contenu de l'emballage
Instructions d'installation
Follow these steps to set up your ROFAVEZCO USB 3.2 Extender:
- Connectez l'unité émettrice (TX) :
- Connect the USB-C to C cable from your computer (PC, Laptop, PS5, Xbox) to the "PC HOST" port on the Transmitter (TX) unit.
- If your setup requires video, connect an HDMI cable from your computer or source device to your monitor. Note that this USB extender does not transmit video; it only extends USB signals.
- Connectez le récepteur (RX) :
- Connect the 24V 2A power adapter to the "DC/24V" port on the Receiver (RX) unit and plug it into a power outlet.
- Connect your USB peripherals (e.g., cameras, printers, external hard drives, keyboard, mouse, gamepad) to the four USB 3.0 ports on the Receiver (RX) unit.
- Connect TX and RX Units with Ethernet Cable:
- Use a high-quality Cat5e or Cat6 Ethernet cable to connect the "UTP OUT" port on the Transmitter (TX) unit to the "UTP IN" port on the Receiver (RX) unit. For optimal performance and maximum distance (up to 70m), a Cat6 cable is recommended.
- Ensure the Ethernet cable is a direct connection between the TX and RX units and is not routed through a network switch or router, as this device uses the cable for direct USB signal transmission, not network data.
- Mise sous tension :
- Once all connections are secure, power on your computer and connected USB devices. The extender is plug-and-play and should be recognized automatically by your operating system.
Figure 2: Home Office Connection Diagram
Figure 3: Gaming Connection Diagram
Figure 4: Home Surveillance Connection Diagram
Mode d'emploi
The ROFAVEZCO USB 3.2 Extender operates as a transparent extension of your USB connection. Once set up, connected USB devices will function as if they were directly connected to your computer.
- Transfert de données : The 4-port USB 3.0 hub on the receiver supports data transfer rates up to 5 Gbps, allowing for high-speed communication with compatible devices.
- Alimentation par Ethernet (PoE) : The system supports PoE, meaning the receiver unit can draw power from the Ethernet cable if your setup supports it, simplifying power management. Otherwise, use the provided 24V 2A power adapter for the receiver.
- Voyants lumineux : Observe the "STATUS" indicator lights on both the TX and RX units. A solid light typically indicates a successful connection and operation. Refer to the specific product manual for detailed light status meanings.
- Compatibilité: The extender is compatible with Windows, macOS, Android, and Linux operating systems without requiring driver installation.
Figure 5 : Scénario d'utilisation typique
Entretien
The ROFAVEZCO USB 3.2 Extender requires minimal maintenance. To ensure optimal performance and longevity:
- Keep the units in a cool, dry environment, away from direct sunlight and excessive heat.
- Évitez d'exposer les appareils à l'humidité ou aux liquides.
- Clean the exterior of the units with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Vérifiez que tous les branchements de câbles sont bien fixés et exempts de dommages.
Dépannage
If you encounter issues with your USB 3.2 Extender, please refer to the following common solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| No power to Receiver (RX) unit. | Power adapter not connected or faulty; PoE not active or incompatible. | Ensure the 24V 2A power adapter is securely connected to the RX unit and a working power outlet. If using PoE, verify your PoE source is active and compatible. |
| USB devices not recognized or intermittent connection. | Faulty Cat cable; cable too long or low quality; loose connections; incompatible USB device. |
|
| Slow USB data transfer speeds. | Using USB 2.0 devices; Cat cable quality/length; multiple high-bandwidth devices. |
|
| "UPDATE NORMAL" switch on TX unit. | This switch is for firmware updates. | Leave this switch in the "NORMAL" position for regular operation. Only switch to "UPDATE" if performing a firmware update as instructed by ROFAVEZCO support. |
| "USB POWER FOLLOW PC ON" switch on RX unit. | Controls USB power behavior. | This switch controls how the USB ports on the RX unit receive power. "FOLLOW PC" typically means power is controlled by the PC's USB power state. "ON" means the USB ports are always powered when the RX unit has power. Adjust as needed for your peripherals. |
If the problem persists, please contact ROFAVEZCO customer support for further assistance.
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Marque | ROFAVEZCO |
| Modèle | USB 3.2 70m 4-Port Extender |
| Couleur | Noir |
| Interface matérielle | USB 3.0, RJ45 Ethernet |
| USB Ports (Receiver) | 4 ports USB 3.0 |
| Distance d'extension | Up to 70 meters (230 feet) over Cat5e/Cat6 cable |
| Taux de transfert de données | 5 gigabits par seconde (USB 3.0) |
| Protocole de liaison de données | Ethernet, USB |
| Alimentation (TX) | Powered by PC via USB-C |
| Alimentation (RX) | 24V 2A DC Adapter (included) or PoE |
| Systèmes d'exploitation compatibles | Windows, macOS, Android, Linux (Driver-free) |
| Appareils compatibles | Cameras, Printers, USB 3.0 Peripherals, External Hard Drives, Barcode Scanners, Gamepads, Keyboards, Mice |
| Dimensions du produit (approx.) | 5L x 3W x 8H centimeters (for each unit) |
| Code UPC | 635403250891 |
Informations sur la garantie
ROFAVEZCO products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ROFAVEZCO webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.
Assistance clientèle
If you require technical assistance or have questions about your ROFAVEZCO USB 3.2 Extender, please contact our customer support team. You can typically find contact information on the official ROFAVEZCO websur le site ou dans la documentation fournie avec votre produit.
For the latest drivers, firmware updates, and FAQs, please visit the ROFAVEZCO support page online.