NZXT Kraken Plus 360 RGB AIO CPU Liquid Cooler Instruction Manual

Introduction

The NZXT Kraken Plus 360 RGB is an all-in-one (AIO) CPU liquid cooler designed to provide efficient and quiet cooling for your processor. It features a 360mm radiator, F360 RGB Core single-frame fans, and a customizable 1.54-inch square LCD on the pump cap. This manual provides essential information for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your cooler.

Qu'y a-t-il dans la boîte

Vérifiez que tous les composants sont présents avant de commencer l'installation :

• NZXT Kraken Plus 360 RGB AIO Cooler (Pump, Radiator, and Fans pre-assembled)
• Mounting Hardware for Intel (LGA 1851, 1700, 1200, 115X)
• Matériel de montage pour AMD (AM5, AM4)
• Breakout Cable for Pump Connections
• Documentation (Guide de démarrage rapide, Informations sur la garantie)

Image: Components of the NZXT Kraken Plus 360 RGB AIO liquid cooler, showing the radiator with three fans, the pump head, and tubing.

Configuration et installation

The Kraken Plus 360 RGB is designed for straightforward installation with pre-applied thermal paste and tool-free mounting brackets. Ensure your PC is powered off and unplugged before installation.

1. Préparez le socket du processeur

Identify the correct mounting brackets for your CPU socket (Intel LGA 1851/1700/1200/115X or AMD AM5/AM4). The cooler comes with Intel brackets pre-installed. If using AMD, replace the Intel brackets with the provided AMD brackets.

Image: Illustration of Intel LGA 1851, 1700, 1200, 115X and AMD AM5, AM4 mounting brackets for wide compatibility.

Image: Close-up of the cooler's cold plate with pre-applied thermal paste, ready for installation.

2. Monter le radiateur et les ventilateurs

Install the 360mm radiator with its integrated F360 RGB Core fans into your PC case. Typically, this is mounted at the top or front of the case. Secure the radiator using the provided screws.

3. Install the Pump

Carefully place the pump block onto your CPU, aligning it with the mounting holes. The cooler comes with pre-applied thermal paste, so no additional paste is needed. Secure the pump using the thumb screws or mounting hardware appropriate for your socket.

Image: The NZXT Kraken Plus 360 RGB AIO cooler installed at the top of a white PC case, showcasinet son éclairage RGB.

4. Connectez les câbles

Connect the pump's single breakout cable to the appropriate headers on your motherboard and power supply. This includes connections for pump power, fan power, and USB for NZXT CAM software control. Ensure all connections are secure.

Image: Diagram illustrating the streamlined cabling of the Kraken Plus RGB, highlighting the single breakout cable from the pump cap for simplified management.

Guide vidéo d'installation

Operating the Kraken Plus 360 RGB

Once installed, the Kraken Plus 360 RGB offers advanced control and customization through the NZXT CAM software.

1. Logiciel NZXT CAM

Téléchargez et installez le logiciel NZXT CAM depuis le site officiel de NZXT. website. This software allows you to monitor system temperatures, customize RGB lighting effects for the fans and pump, and configure the 1.54-inch LCD display.

2. Personnalisation de l'écran LCD

The 1.54-inch square LCD on the pump cap can display real-time system statistics (CPU/GPU temperature, liquid temperature), custom images, or animated GIFs. Use the NZXT CAM software to upload and manage your preferred content for the display.

Image: The pump head of the NZXT Kraken Plus 360 RGB, featuring a vibrant 1.54-inch square LCD displaying the liquid temperature.

3. Commande des ventilateurs et des pompes

Within NZXT CAM, you can adjust the pump speed and fan curves to optimize cooling performance and noise levels. Choose from preset profiles (e.g., Silent, Performance) or create custom profiles based on your system's needs.

Entretien

Regular maintenance ensures the longevity and optimal performance of your NZXT Kraken Plus 360 RGB cooler.

• Nettoyage de la poussière : Periodically clean the radiator fins and fan blades with compressed air to prevent dust buildup, which can impede airflow and cooling efficiency.
• Gestion des câbles: Ensure all cables are neatly routed and not obstructing airflow or fan operation.
• Mises à jour logicielles : Keep your NZXT CAM software updated to the latest version for new features, bug fixes, and improved compatibility.
• Niveau de liquide : As a closed-loop system, the liquid cooler does not require regular refilling. However, monitor liquid temperatures via NZXT CAM for any unusual spikes that might indicate an issue.

Dépannage

If you encounter issues with your Kraken Plus 360 RGB, refer to the following common troubleshooting steps:

• Pas d'alimentation/RGB : Check all cable connections, especially the SATA power and motherboard headers. Ensure the USB cable is securely connected for NZXT CAM functionality.
• Températures élevées : Verify that the pump is running (check NZXT CAM for RPMs). Ensure fans are spinning correctly and not obstructed. Re-check pump mounting pressure on the CPU.
• Écran LCD non fonctionnel : Confirm the USB connection to the motherboard. Reinstall or update NZXT CAM software. Check display settings within CAM.
• Bruit excessif : Adjust fan curves and pump speed in NZXT CAM to a quieter profile. Ensure no cables are hitting fan blades.

For further assistance, contact NZXT customer support.

Caractéristiques

Garantie et assistance

The NZXT Kraken Plus 360 RGB AIO CPU Liquid Cooler comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official NZXT website. For technical support, troubleshooting, or replacement parts, please contact NZXT customer service directly.

• Plan de protection de 3 ans : Disponible à l'achat.
• Plan de protection de 4 ans : Disponible à l'achat.