Jectse Wireless Print Server Instruction Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Jectse Wireless Print Server. This device enables you to share up to four USB printers across a network, supporting both wired and wireless connections. It is designed for use in various environments, including homes, offices, warehouses, and retail stores.

The print server features a 10/100 Mbps LAN bridge and a USB 2.0 port, ensuring stable printing services and broad compatibility with most traditional USB interface printers.

2. Produit terminéview

Familiarize yourself with the components and ports of your Jectse Wireless Print Server.

Image 2.1: Devant et côté view of the Jectse Wireless Print Server, highlighting the LED indicators, WPS button, LAN port, USB 2.0 port, Micro USB port (DC 5V IN), and Reset button.

2.1. Composants de l'appareil

• Indicateurs LED : Provide status information for WLAN, LAN, Bridge, and System (SYS).
• Bouton WPS : Used for quick wireless pairing. Press for 6 seconds to initiate pairing.
• LAN Port (IN): 10/100Mbps Ethernet port for connecting to your network router or switch.
• BRIDGE Port (OUT): 10/100Mbps Ethernet port for network bridging.
• Port USB 2.0: Connects to your USB printer. Supports up to 480 Mbps.
• Micro USB Port (DC 5V IN): Alimentation électrique de l'appareil.
• Bouton de réinitialisation : Used to restore factory settings. Press for 6 seconds to reset.

3. Installation

3.1. Connexion matérielle

1. Connecter l'alimentation : Plug the provided power adapter into the Micro USB Port (DC 5V IN) on the print server and then into a power outlet. The SYS LED indicator should light up.
2. Connecter l'imprimante : Connect your USB printer to the USB 2.0 Port on the print server using a USB cable. Ensure the printer is powered on.
3. Network Connection (Choose one mode):
   • Mode filaire: Connect an Ethernet cable from your network router or switch to the LAN Port (IN) on the print server. The LAN LED indicator should light up.
   
   Image 3.1: Wired Mode setup, connecting the print server to a wireless router via an Ethernet cable.
   • Mode sans fil : Press the WPS button on the print server for 6 seconds. Then, within two minutes, press the WPS button on your wireless router. The WLAN LED indicator on the print server should light up steadily once connected.
   

   Image 3.2: Wireless Mode setup, connecting the print server to a wireless router via Wi-Fi.

   • Mode autonome: In this mode, the print server broadcasts its own Wi-Fi signal. Connect your computer directly to the print server's Wi-Fi network. This mode is suitable for direct printing without an existing network infrastructure.
   

   Image 3.3: Standalone Mode setup, where the print server broadcasts its own signal for direct connection.

3.2. Configuration du logiciel

After hardware connection, you will need to configure the print server and install printer drivers on your computers.

1. Accéder Web Interface de gestion : Ouvrir un web browser on a computer connected to the same network as the print server. Enter the print server's IP address (refer to your device's default IP or check your router's connected devices list) to access the web-based management interface. Follow the on-screen instructions to configure network settings, printer sharing, and security.
2. Install Printer Drivers: On each computer that will use the shared printer, install the appropriate drivers for your specific printer model. These drivers are usually provided by the printer manufacturer.
3. Add Network Printer: Use your operating system's 'Add a Printer' or 'Add a Device' function to locate and connect to the printer shared via the Jectse Wireless Print Server.

4. Mode d'emploi

Once configured, the Jectse Wireless Print Server allows multiple users on the network to send print jobs to the connected USB printer(s).

• Impression: From any computer with the printer drivers installed and connected to the network, select the shared printer from your application's print dialog box and send your print job as usual.
• Multi-Printer Support: The print server supports sharing up to four USB printers simultaneously. Ensure each printer is connected to a separate USB port (if using a USB hub, ensure it is powered).
• Compatibilité du système d'exploitation : The device is compatible with mainstream operating systems, including Windows 7, 8, 10, 11, XP, and OS X.

5. Entretien

To ensure optimal performance and longevity of your Jectse Wireless Print Server, follow these general maintenance guidelines:

• Nettoyage: Use a soft, dry cloth to clean the exterior of the device. Avoid using liquid cleaners or aerosols, which may damage the components.
• Ventilation: Veillez à placer l'appareil dans un endroit bien ventilé afin d'éviter toute surchauffe. Ne bloquez aucune ouverture de ventilation.
• Alimentation: Utilisez uniquement l'adaptateur secteur d'origine fourni avec l'appareil.
• Mises à jour du micrologiciel : Vérifiez périodiquement les instructions du fabricant. website pour toute mise à jour du firmware disponible afin d'améliorer les performances et la sécurité.

6. Dépannage

If you encounter issues with your Jectse Wireless Print Server, refer to the following common troubleshooting steps:

• Imprimante introuvable :
  • Ensure the print server is powered on and all cables (power, USB, Ethernet) are securely connected.
  • Verify that the printer is powered on and functioning correctly when connected directly to a computer.
  • Check the LED indicators on the print server. The SYS, WLAN/LAN, and BRIDGE LEDs should indicate active connections.
  • Confirm that the printer drivers are correctly installed on the client computer.
• Problèmes de connexion réseau :
  • For wired connections, ensure the Ethernet cable is working and connected to a functional port on your router/switch.
  • For wireless connections, verify that the WPS pairing process was successful and the WLAN LED is steady. Ensure the print server is within range of your wireless router.
  • Check your router's settings to ensure the print server is assigned an IP address and is not blocked by a firewall.
• Impossible d'accéder Web Interface de gestion :
  • Ensure your computer is on the same network segment as the print server.
  • Verify the print server's IP address. If unsure, you might need to use a network scanning tool or check your router's DHCP client list.
• Réinitialisation de l'appareil : If issues persist, you can perform a factory reset. Press and hold the Bouton de réinitialisation for 6 seconds until the LED indicators flash, then release. This will revert all settings to their default values. You will need to reconfigure the device after a reset.

7. Spécifications