Amewi DDF-350 10-Channel Remote Control System User Manual

1. Produit terminéview

The Amewi DDF-350 is a sophisticated 10-channel 2.4 GHz digital proportional radio control system designed for various RC models, including cars, crawlers, commercial vehicles, tanks, and boats. This system provides precise control and extensive programming options through its intuitive interface and high-contrast color display.

Figure 1.1 : The Amewi DDF-350 10-channel remote control (transmitter) and its accompanying 10-channel receiver unit.

Caractéristiques principales :

• 10 Programmable Channels: Offers extensive control for various functions and accessories.
• Technologie 2.4 GHz : Assure une communication fiable et sans interférences.
• High-Contrast Color Display: Provides clear visibility of settings and telemetry data.
• Menu multilingue : User-friendly interface with support for multiple languages, including German.
• Application polyvalente : Suitable for a wide range of RC models.

2. Installation

2.1 Déballage et inspection

Carefully unpack all components. Verify that the package contains the DDF-350 transmitter and the 10-channel receiver. Inspect all items for any signs of damage. If any components are missing or damaged, contact your retailer immediately.

2.2 Installation de la batterie de l'émetteur

The DDF-350 transmitter typically requires 4 AA batteries (not included). Locate the battery compartment on the underside of the transmitter. Open the cover, insert the batteries according to the polarity indicators (+/-), and securely close the compartment.

Figure 2.1 : Arrière view of the DDF-350 transmitter, showing the location of the battery compartment (typically on the underside, not visible in this specific angle but implied by the overall design).

2.3 Connexion du récepteur

The 10-channel receiver unit is designed to connect to various components of your RC model. Refer to the diagram below for typical connections:

Figure 2.2 : The Amewi 10-channel receiver unit. Channels 1-10 are available for connecting servos, ESCs, and other accessories. The BIND port is used for pairing with the transmitter, and the B-B+ port is for power input (4.8-10VDC).

• Canal 1 (CH1) : Typically for Steering Servo.
• Canal 2 (CH2) : Typically for Throttle/ESC.
• Channels 3-10 (CH3-CH10): For auxiliary functions such as lights, winches, sound modules, gear shifting, or other programmable features.
• B-B+ Port: Connect your model's power source (e.g., battery via ESC's BEC or a separate receiver battery) to this port. Ensure the voltage est dans la plage spécifiée (4.8-10VDC).
• Port BIND : Used for the binding procedure.

2.4 Liaison de l'émetteur et du récepteur

Binding is the process of linking the transmitter to the receiver, establishing a unique communication link. Follow these steps:

1. Assurez-vous que l'émetteur est hors tension.
2. Insert the bind plug (usually included with the receiver) into the BIND port on the receiver.
3. Connect power to the receiver (e.g., turn on the ESC connected to CH2, or connect a receiver battery). The receiver's LED should flash rapidly, indicating it is in binding mode.
4. While holding down the BIND button on the transmitter (refer to your transmitter for exact button location, often near the power button or on the display panel), power on the transmitter.
5. The transmitter's display will show a binding progress or confirmation. The receiver's LED should turn solid, indicating successful binding.
6. Release the BIND button on the transmitter, then power off both the transmitter and receiver.
7. Retirez la prise d'affectation du récepteur.
8. Power on the transmitter first, then the receiver. The receiver's LED should illuminate solid, confirming a successful connection. Test all controls before operating your model.

3. Mode d'emploi

3.1 Contrôles de base

The DDF-350 transmitter features standard pistol-grip controls:

• Volant: Controls the steering (Channel 1). Turn left or right to steer your model.
• Gâchette d'accélérateur : Controls forward/reverse movement and braking (Channel 2). Pull the trigger for forward, push for reverse/brake.

Figure 3.1 : Haut view of the DDF-350 transmitter, highlighting the steering wheel and various auxiliary control buttons and dials.

Figure 3.2 : Détaillé view of the DDF-350 steering wheel, which provides precise control over Channel 1 (steering).

3.2 Display Navigation and Programming

The DDF-350 features a color display for accessing and adjusting various settings. Use the navigation buttons and dials to move through the menu options.

Figure 3.3 : The DDF-350's color display, showing real-time telemetry data such as battery voltage, RSSI, and channel status. The menu allows for extensive programming.

• Bouton d'alimentation : Located on the top left, press and hold to power on/off.
• Navigation Dials/Buttons: Use these to scroll through menu options and adjust values.
• Boutons CH3/CH4 : Dedicated buttons for auxiliary channels 3 and 4.
• Boutons CH9/CH10 : Dedicated buttons for auxiliary channels 9 and 10, often located on the grip for easy access.

Figure 3.4 : Auxiliary channel buttons CH9 and CH10, conveniently placed on the grip for quick access to additional functions.

3.3 Options de programmation avancées

The DDF-350 offers numerous programming options to customize your model's behavior. Access these through the main menu on the color display.

• Endpoint Adjustment (EPA/ATV): Réglez la course maximale de chaque servomoteur.
• Double taux (D/R) : Réglez la sensibilité de la direction et de l'accélérateur.
• Exponentielle (EXP) : Fine-tune the response curve around the center of the stick/wheel.
• Sous-garniture : Make small adjustments to the servo's neutral position.
• Mixage des canaux : Combine the control of two or more channels for complex functions (e.g., 4-wheel steering).
• Mémoire du modèle : Store settings for multiple models.
• Télémétrie: Monitor real-time data such as receiver battery voltage and signal strength (RSSI).

Refer to the on-screen menu for detailed instructions on each programming function. The menu is available in several languages, including German, making programming intuitive.

4. Entretien

4.1 Nettoyage

• Essuyez l'émetteur et le récepteur avec un chiffon doux et sec.
• Pour les saletés tenaces, appliquez légèrementampNettoyez le chiffon avec de l'eau ou une solution nettoyante douce. Évitez les produits chimiques agressifs.
• Do not immerse the transmitter or receiver in water.

4.2 Stockage

• Conservez le système dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes.
• Retirez les piles de l'émetteur si vous prévoyez de le stocker pendant une période prolongée afin d'éviter les fuites.
• Keep the system away from dust and moisture.

4.3 Entretien de la batterie

• Always use fresh, high-quality batteries for the transmitter.
• If using rechargeable batteries, follow the manufacturer's charging instructions.
• Ensure the receiver's power source (model battery or dedicated receiver battery) is adequately charged before each use.

5. Dépannage

If you encounter issues with your Amewi DDF-350 system, refer to the following common problems and solutions:

6. Spécifications

7. Garantie et assistance

7.1 Informations sur la garantie

Amewi products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Amewi webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.

7.2 Assistance clientèle

If you require technical assistance, have questions about product operation, or need to report a defect, please contact Amewi customer support. Contact information can typically be found on the Amewi website ou sur l'emballage du produit.

For further information and updates, please visit the official Amewi website: www.amewi.com