JACKYLED Floor Lamp with Table and 2 Drawers (Model JKFL0323205801A) User Manual

1. Introduction

Thank you for choosing the JACKYLED Floor Lamp with Table and 2 Drawers. This versatile product combines a floor lamp, an end table, and a charging station into one compact unit, designed to enhance convenience and ambiance in your living space. It features adjustable light color temperatures and ample storage, making it ideal for bedrooms, living rooms, or study areas.

Image 1.1: The JACKYLED Floor Lamp with integrated table and drawers, demonstrating its three adjustable light color temperatures.

2. Précautions de sécurité

• Turn off power switch or unplug the power cord when installing or uninstalling bulbs.
• DO NOT plug high-power appliances into the 2-prong AC outlet.
• DO NOT place any ornaments or anything else on the lamp tête.
• Place on flat floor to prevent it from toppling over.
• Avoid prolonged exposure to direct sunlight, extreme moisture, or direct sunlight.
• Gardez le lamp away from flammable materials or substances.

3. Contenu du colis

Veuillez vérifier le contenu du colis afin de vous assurer que tous les composants sont présents et en bon état. Si des pièces sont manquantes ou endommagées, veuillez contacter le service client.

• Upper Boards (A, B)
• Upper Frames (C)
• Lower Left Frame (F)
• Lower Right Frame (G)
• Middle Board (I)
• Square Bars (K)
• Upper Drawer (M)
• Lower Drawer (N)
• Drawer Bottoms (O)
• Shade (W)
• Shade Rings (X, Y)
• Lamp Pole and Head
• Borne de Recharge
• Ampoule LED
• Hardware (Long Bolts D, Short Bolts H, Wood Screws J, Drawer Handles P, Drawer Washers Q, Drawer Screws R, Bases L, Wrench U, Cable Clips V)

Image 3.1 : Vue éclatée view du lamp components and included hardware.

4. Installation et assemblage

Follow these steps to assemble your JACKYLED Floor Lamp. All necessary tools are included.

4.1 Guide vidéo d'assemblage

4.2 instructions d'assemblage étape par étape

1. Assemble Upper Boards and Charging Station:
   • Use two Upper Frames (C) and eight Long Bolts (D) to fasten the two Upper Boards (A and B) together. Ensure the arrows on the frames face outwards.
   • Fix the Charging Station to Upper Board A using two Short Bolts (H).
   

   Image 4.2: Detail of the integrated charging station.

2. Install Middle Board:
   • Attach the Middle Board (I) to the Upper Frames using four Wood Screws (J).
3. Install Lower Frames and Base:
   • Connect the Lower Left Frame (F) and Lower Right Frame (G) to the Middle Frames using four Short Bolts (H). Ensure the grooves face inwards and stoppers are away from the charging station.
   • Install two Square Bars (K) to the Lower Left Frame (F) and Lower Right Frame (G) using four Long Bolts (D).
   • Screw the four Bases (L) into the bottom of the assembled frame.
4. Assembler les tiroirs :
   • Unfold the Upper Drawer (M) and Lower Drawer (N). Insert the Drawer Bottoms (O) into each drawer.
   • Attach the Drawer Handles (P) to the front of each drawer using the Drawer Washers (Q) and Drawer Screws (R).
   • Glissez les tiroirs assemblés dans leurs emplacements respectifs du cadre.
   

   Image 4.3: The two large drawers provide convenient storage.
5. Assembler Lamp Pole and Shade:
   • Carefully feed the lamp cord through the hole in the Upper Board B.
   • Connectez le lamp pole to the top of the table structure by twisting it tight from top down, then secure it with the washer and nut from underneath.
   • Assembler le lampshade: Roll the Shade (W) around the Shade Rings (X and Y) and secure the fastener.
   • Remove the shade fitter from the lamp socket. Place the assembled lampombre sur le lamp socket, then re-attach the shade fitter to secure it.
   • Install the included LED bulb into the lamp douille.
   

   Image 4.4 : Le lampshade can be adjusted for optimal lighting.

6. Connect Power and Organize Cables:
   • Splice the wire connector from the lamp pole to the charging station.
   • Use the provided Cable Clips (V) to organize the power cords neatly.
   • Plug the 2-prong power cord into a wall outlet.

5. Mode d'emploi

5.1 Lamp Opération

Le lamp features an integrated 9W LED bulb with three color temperature options: warm white (3000K), natural white (4000K), and cool white (5000K).

• Pour tourner le lamp ON/OFF, use the power switch located on the charging station.
• To cycle through the three color temperatures, simply turn the lamp OFF and then ON again quickly. Each toggle will switch to the next color temperature.

Image 5.1: Visual representation of the three available light color temperatures.

5.2 Utilisation de la borne de recharge

The integrated charging station provides convenient power for your electronic devices.

• The charging station includes one USB-A port, one USB-C port, and one 2-prong AC outlet.
• Simply plug your compatible devices into the appropriate port to begin charging.
• Assurez-vous que le lamp's main power switch is ON for the charging station to function.
• Refer to the "Safety Precautions" section regarding the use of the AC outlet.

Image 5.2: The charging station with various ports for electronic devices.

6. Entretien et maintenance

• Débranchez toujours le lamp de la source d'alimentation avant le nettoyage.
• Utilisez un chiffon doux et sec pour nettoyer le lamp. Avoid using harsh chemicals or abrasive materials that may damage the surface.
• Periodically check all connections to ensure they are tight and secure.
• Lorsque vous n'utilisez pas le lamp for an extended period of time, unplug the power cord and store the lamp dans un endroit frais et sec.

7. Dépannage

8. Spécifications

9. Garantie et assistance

9.1 Informations sur la garantie

JACKYLED products come with a free 1-year limited warranty. This warranty covers manufacturing defects and quality issues with the product purchased under normal use. Please contact us within the warranty period for a solution. Note that accidental damage or intentional damage is not included in the warranty coverage.

9.2 Assistance clientèle

For any questions, problems, or assistance, please contact our customer service team. We are committed to providing prompt and helpful support.

• E-mail: service@ulights.com
• We provide considerate service, treating every customer with care and providing services online 24 hours a day.

Image 9.1: JACKYLED customer support is available to assist you.