UPHA B0DPMPLWDJ

UPHA 42-inch Round Propane Gas Fire Pit Table User Manual

Model: B0DPMPLWDJ

Marque : UPHA

1. Consignes de sécurité

Veuillez lire et comprendre toutes les consignes de sécurité avant d'assembler, d'utiliser ou d'entretenir cette table foyer. Le non-respect de ces instructions peut entraîner des dommages matériels, des blessures corporelles, voire la mort.

  • This appliance is for outdoor use only. Do not operate indoors.
  • Maintain proper clearance from combustible materials. Ensure at least 3 feet (0.9 meters) from the top and sides to any combustible surfaces.
  • Keep children and pets away from the fire pit table during operation and while it is cooling down.
  • Never leave the fire pit table unattended when in use.
  • N'utilisez pas cet appareil pour cuisiner.
  • Ensure the propane tank is placed outside the fire pit table and connected securely.
  • Always check for gas leaks before each use. Use a soapy water solution on connections; bubbles indicate a leak.
  • Ce produit est certifié CSA pour sa sécurité.
  • For natural gas usage, a conversion kit and professional installation are required. Do not attempt to convert without proper accessories and expertise.

2. Contenu du colis

Verify that all components are present and undamaged before proceeding with setup.

Diagram showing all included components: fire table, tank cover table, rain cover, tank holder ring, lava rocks, instruction manual, and navyblue fire glass.

Image: Included components for the UPHA fire pit table.

  • Concrete Fire Pit Table (1 pc)
  • Propane Tank Cover Table (1 pc)
  • Propane Tank Base Ring (1 pc)
  • Rain Cover (1 pc)
  • Propane Hose (1 pc)
  • Lava Rocks (1 bag)
  • Navyblue Fire Glass (1 bag)
  • Manuel d'utilisation (1 pièce)

3. Instructions de configuration

3.1 Déballage et placement

The fire pit table is shipped in two packages. Carefully remove all components from their packaging.

  • Place the fire pit table on a firm, level, non-combustible surface.
  • Utilize the adjustable balance feet on the fire pit table to ensure stability on various outdoor surfaces.
  • Position the propane tank cover table near the fire pit table, ensuring the propane tank (not included) is easily accessible for connection.
Diagram showing the dimensions of the round fire pit table and the square propane tank cover, with a note that the propane tank does not fit inside the fire table.

Image: Product dimensions and external propane tank placement.

3.2 Connexion du réservoir de propane

  1. Assurez-vous que le bouton de commande de la table foyer est en position « ARRÊT ».
  2. Place a standard 20-pound propane tank (not included) onto the propane tank base ring, then cover it with the propane tank cover table.
  3. Connect the propane hose from the fire pit table to the propane tank valve. Hand-tighten the connection securely. Do not use tools to overtighten.
  4. Perform a leak test: Mix a solution of soapy water (50% soap, 50% water). Apply the solution to all gas connections. Open the propane tank valve slowly. If bubbles appear, there is a leak. Close the tank valve immediately and re-tighten connections. Repeat the test. If leaks persist, do not operate the appliance and contact customer support.
Close-up of the fire pit table's control panel, a 9.8 ft gas hose, and a 304 stainless steel burner.

Image: Gas hose connection and burner detail.

3.3 Adding Lava Rocks and Fire Glass

  • Distribute the lava rocks evenly over the burner area.
  • Carefully place the navyblue fire glass on top of the lava rocks, ensuring the burner ports are not completely blocked. This allows for proper gas flow and flame distribution.
The UPHA fire pit table with flames, showing navyblue fire glass and an adjustable control knob. Text indicates 50000 BTU output and 8-10 hours of heat.

Image: Fire pit in operation, highlighting fire glass and control knob.

4. Mode d'emploi

4.1 Allumage électronique

  1. Assurez-vous que la vanne du réservoir de propane est complètement ouverte.
  2. Press and hold the electronic ignition button.
  3. While holding the ignition button, slowly rotate the control knob to the "LOW" position. Continue to hold the ignition button for at least 45 seconds to allow gas to flow and ignite.
  4. Une fois la flamme allumée, relâchez le bouton d'allumage.
  5. If the flame does not ignite, turn the control knob to "OFF", wait 5 minutes for gas to dissipate, and repeat the ignition process.

4.2 Réglage de la flamme

To adjust the flame height and heat output, rotate the control knob clockwise for a lower flame and counter-clockwise for a higher flame.

4.3 Arrêt

  1. Rotate the control knob to the "OFF" position.
  2. Fermez la vanne du réservoir de propane.
  3. Allow the fire pit table to cool completely before covering or moving.

5. Entretien

5.1 Nettoyage

  • Ensure the fire pit table is completely cool before cleaning.
  • Wipe any stains or dirt from the concrete surface with a soft, damp Chiffon. Évitez les nettoyants abrasifs qui pourraient endommager la finition.
  • The 304 stainless steel burner is designed for long-lasting performance. Clean any debris from the burner ports to ensure optimal flame.

5.2 Stockage et protection

For periods of non-use or during inclement weather, it is recommended to utilize the included oxford rain cover to protect the table and prolong its lifespan.

The UPHA fire pit table and a side table, with an inset showing the included rain cover protecting both items.

Image: Rain cover protecting the fire pit table and side table.

6. Dépannage

If you encounter issues with your UPHA fire pit table, refer to the following common problems and solutions:

ProblèmeCause possibleSolution
Burner does not ignite electronically.No gas flow, igniter not sparking, igniter electrode misaligned.Ensure propane tank valve is open. Check for gas leaks. Verify igniter is clicking. If igniter spark is not reaching the gas, a long lighter or gas match may be used to manually ignite.
Flame goes out unexpectedly after some time.Thermocouple issue, low gas pressure, wind.Ensure the thermocouple is clean and properly positioned in the flame. Check propane tank level. Re-ignite the unit. If the issue persists, contact customer support.
Flamme faible ou flamme irrégulière.Low gas pressure, partially closed tank valve, burner ports blocked.Ensure propane tank valve is fully open. Check propane tank level. Clean burner ports of any debris or fire glass.
Odeur de gaz détectée.Fuite de gaz.Immediately turn off the gas at the propane tank. Perform a leak test with soapy water. Do not operate if a leak is present. Contact emergency services if the odor is strong or persistent.

7. Spécifications

FonctionnalitéDétail
MarqueUPHA
Numéro de modèleB0DPMPLWDJ
Dimensions du produit42"P x 42"L x 13"H
MatérielArtificial Premium Concrete, Stainless Steel
CouleurGrey Texture
FormeRond
Poids de l'article99.2 livres
Capacité de poids de la table200 livres
Type de carburantGaz de pétrole liquéfié (propane)
Puissance calorifique50,000 XNUMX BTU
CertificationCertifié CSA
The UPHA 42-inch round propane gas fire pit table in a patio setting, showcasing its grey textured finish and active flame.

Image: UPHA 42-inch Round Propane Gas Fire Pit Table.

8. Informations sur la garantie

Specific warranty details for the UPHA 42-inch Round Propane Gas Fire Pit Table are not provided in this manual. For information regarding product warranty, please refer to the purchase documentation or contact UPHA customer support directly.

9. Assistance clientèle

For further assistance, technical support, or to inquire about replacement parts, please contact UPHA customer service through the retailer where the product was purchased or visit the official UPHA brand store online.

Boutique en ligne: UPHA Store on Amazon

© 2025 UPHA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.