ACEZUK M06

ACEZUK M06 6000A Car Jump Starter with 150PSI Air Compressor User Manual

Modèle : M06 | Marque : ACEZUK

1. Produit terminéview

Caractéristiques principales

  • 6000A Jump Starter: Capable of reliably jump-starting 12V vehicles (all gasoline engines and up to 12.0L diesel engines) in seconds, even in temperatures ranging from -20°C to 60°C. Provides up to 70 jump starts on a single charge. Suitable for automobiles, trucks, motorcycles, boats, lawnmowers, yachts, pickups, and snowmobiles.
  • 150PSI Portable Air Compressor: Designed for rapid inflation of all tires from 0 PSI to 150 PSI. Features dual-cylinder technology for a fast inflation rate of 50 LPM (1.76 CFM).
  • Digital Pressure Gauge & Automatic Shut-off: Equipped with a real-time LED digital pressure gauge for accurate readings. Allows selection of preset modes (car, bicycle, motorcycle, ball) and automatically stops inflation once the desired PSI is reached.
  • Batterie externe 20 000 mAh : Functions as a power bank with Type-C input (5V/3A, 9V/2A) and dual USB outputs (5V/3A) to charge personal devices like cell phones and tablets. Recommended charging the jump starter with a 5V/2A adapter or higher.
  • Conception pratique: Features a unique 3.4-inch large LCD screen displaying operational status, battery level, and potential errors. Includes a 600 lumens LED light with 3 modes (constant light, strobe, SOS) for outdoor activities or emergencies. An additional small light is integrated for illuminating the inflation operation area.
  • Câbles de démarrage intelligents : Provides 8 types of protection, including protection against overheating, overcharge, over-discharge, over-voltage, short-circuit, reverse polarity, and anti-interference.

Contenu du colis

  • 1 x ACEZUK M06 Jump Starter with Air Compressor
  • 1 x câble de démarrage intelligent
  • 1 x tuyau de pompe à air
  • 4 x pistolets à gaz
  • Câble de charge 1 x USB-C
  • 1 x Manuel d'utilisation
  • 1 x étui de transport portable en EVA
Contents of the ACEZUK M06 package including the jump starter, cables, hose, nozzles, and carrying case.
Figure 1: Package Contents of the ACEZUK M06 Jump Starter and Air Compressor.

2. Consignes de sécurité

Veuillez lire et comprendre toutes les consignes de sécurité avant d'utiliser ce produit. Le non-respect de ces consignes peut entraîner un choc électrique, un incendie et/ou des blessures graves.

  • Do not operate the air pump continuously for extended periods. If the tire compressor becomes hot, allow it to cool down for several minutes before resuming inflation.
  • Avoid over-inflating tires, as this can cause damage. If a tire is over-inflated, gently press the tire valve to release excess air.
  • Always ensure correct polarity when connecting the jump cables to the vehicle battery terminals. Incorrect connection can cause sparks, damage the device, or harm the user.
  • Gardez l'appareil et ses accessoires hors de portée des enfants.
  • Do not attempt to disassemble, modify, or repair the device. This will void the warranty and may lead to hazards.
  • Rangez l'appareil dans un endroit frais et sec, à l'abri de la lumière directe du soleil, de l'humidité et des matériaux inflammables.
  • Use only the provided smart jump cables and accessories with this device.

3. Installation

Charger l'appareil

Before initial use, fully charge the ACEZUK M06. It is recommended to charge the device every 3-4 months to maintain optimal battery health, especially if not in regular use.

  1. Connect the provided USB-C charging cable to the device's Type-C input port.
  2. Connect the other end of the USB-C cable to a 5V/2A or higher USB power adapter (not included).
  3. The LCD screen will display the charging status and battery level. Charge until the battery indicator shows 100%.

Inspection initiale

Upon receiving your ACEZUK M06, perform a quick inspection:

  • Check the device and all accessories for any visible damage.
  • Vérifiez que tous les composants énumérés dans la section « Contenu de l'emballage » sont présents.

4. Mode d'emploi

4.1 Démarrage rapide d'un véhicule

Suivez ces étapes pour démarrer votre véhicule en toute sécurité :

  1. Assurez-vous que le contact du véhicule est coupé et que le frein de stationnement est serré.
  2. Insert the smart jump cable plug completely into the jump starter's designated port. The red and green lights on the clamp will flash alternately, indicating it's ready.
  3. Connectez le câble rougeamp à la borne positive (+) de la batterie du véhicule.
  4. Connectez le cl noiramp à la borne négative (-) de la batterie du véhicule.
  5. If the indicator light on the smart cable flashes red and green alternately, and the vehicle does not start, press and hold the forced start button on the smart cable for 3 seconds until the light turns solid green. This bypasses safety checks for severely discharged batteries.
  6. Start the vehicle's engine within 30 seconds of the indicator light turning solid green.
  7. Une fois le véhicule démarré, retirez immédiatement le clamps from the battery terminals within 30 seconds. First, remove the black clamp, puis le cl rougeamp.
ACEZUK M06 Jump Starter connected to a car battery with smart clamps.
Figure 2 : Connexion correcte du démarreur à la batterie du véhicule.
Smart jump cables with built-in safety features and indicator lights.
Figure 3: Smart jump cables providing multiple safety protections.

Video 1: Demonstration of how to force start a car using a jump starter.

Video 2: Step-by-step guide on how to jump start a car.

4.2 Utilisation du compresseur d'air

To inflate tires or other inflatables:

  1. Appuyez sur le bouton ON/OFF pour allumer l'appareil.
  2. Briefly press the air pump button (usually indicated by a tire icon) to enter inflation mode. The screen will display the current pressure.
  3. Press the 'M' (Mode) button to cycle through and select the appropriate inflation mode (e.g., car, bicycle, motorcycle, ball).
  4. Use the '+' and '-' buttons to adjust the desired target air pressure. You can also change the unit of measurement (PSI, BAR, KPA) if available.
  5. Connect the air pump hose securely to the tire valve or the appropriate gas nozzle for other inflatables.
  6. Press and hold the air pump button for 3 seconds to begin inflation.
  7. Le compresseur s'arrêtera automatiquement une fois la pression préréglée atteinte.
  8. Briefly press the air pump button again to exit inflation mode.
ACEZUK M06 Air Compressor inflating a car tire.
Figure 4: The air compressor in use, inflating a car tire.
Digital display of the ACEZUK M06 showing real-time tire pressure.
Figure 5: The large LCD screen displays real-time tire pressure and battery level.

Video 3: Instructions on how to inflate a tire using the device.

4.3 Utilisation comme batterie externe

The ACEZUK M06 can charge your electronic devices:

  1. Connect your mobile phone, tablet, or other USB-powered device to one of the dual USB output ports (5V/3A) on the jump starter.
  2. L'appareil commencera automatiquement à charger votre appareil connecté.
ACEZUK M06 acting as a power bank, charging multiple devices.
Figure 6: The device charging a smartphone and a smartwatch.

4.4 Utilisation de la lumière LED

The integrated LED light provides illumination for various situations:

  1. Press the light button (usually indicated by a light bulb icon) to turn on the LED light.
  2. Press the button repeatedly to cycle through the 3 modes: constant light, strobe, and SOS signal.
  3. An additional small light is located on the bottom of the product to specifically illuminate the area around the tire valve during inflation.
Various uses of the ACEZUK M06 LED light, including night repair, outdoor emergencies, night reading, and camping.
Figure 7: The 600 lumens LED light offers multiple modes for different scenarios.

5. Entretien

Proper maintenance ensures the longevity and optimal performance of your ACEZUK M06:

  • Stockage: Store the device in its portable EVA carrying case in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
  • Rechargement : If the device is not used regularly, recharge it every 3-4 months to prevent deep discharge and maintain battery health.
  • Nettoyage: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals, solvents, or abrasive cleaners. Ensure all ports are free from dust and debris.
  • Entretien des câbles : Inspect the smart jump cables and air pump hose regularly for any signs of wear or damage. Replace if necessary.

6. Dépannage

If you encounter issues with your ACEZUK M06, refer to the table below for common problems and their solutions:

ProblèmeCause possibleSolution
L'appareil ne s'allume pas.Batterie faible ou pas de charge.Charge the device fully using the provided USB-C cable and a suitable adapter.
Vehicle not starting.Incorrect cable connection, severely discharged battery, or vehicle issue.Assurez-vous que clamps are connected correctly (red to +, black to -). Check if the smart cable indicator light is solid green. If not, use the forced start function. If the issue persists, the vehicle battery might be beyond jump-starting or there's another vehicle problem.
Le compresseur d'air ne gonfle pas.Hose not securely connected, incorrect pressure setting, or low device battery.Verify the air pump hose is tightly connected to the tire valve. Ensure a target pressure is set. Check the device's battery level and recharge if necessary.
Air compressor overheats.Continuous operation without cooling.Stop the inflation process and allow the compressor to cool down for several minutes before resuming. Avoid prolonged continuous use.
Lecture de pression inexacte.Incorrect unit of measurement selected.Press the 'U' (Unit) button to cycle through and select the correct pressure unit (PSI, BAR, KPA).

7. Spécifications

  • Marque: ACEZUK
  • Modèle: M06
  • Courant de pointe: 6000 Ampil y a
  • Capacité de la batterie : 21800 mAh (lithium-ion)
  • Type de service de véhicule : Automotive (All Gas, up to 12.0L Diesel)
  • Voltage: 12 volts
  • Pression du compresseur d'air : 0-150 PSI
  • Débit d'air: 50 LPM (1.76 CFM)
  • Entrée Type-C : 5 V/3 A, 9 V/2 A
  • Sorties USB : Dual 5V/3A
  • Lumière LED : 600 Lumens (3 modes: Light/Strobe/SOS)
  • Température de fonctionnement : -20°C à 60°C
  • Poids du produit : 1.57 kg
  • Dimensions du colis : 21.1 x 17.3 x 14.4 cm

8. Garantie et assistance

ACEZUK s'engage à fournir des produits de haute qualité et un excellent service client.

  • Garantie: This product comes with a 2-year FREE warranty from the date of purchase.
  • Support technique : Lifetime technical support is available for all ACEZUK M06 users.
  • Service client: Notre service clientèle est disponible 24h/24 et 7j/7 pour répondre à toutes vos questions et préoccupations.

For warranty claims, technical assistance, or general inquiries, please refer to the contact information provided with your purchase or visit the official ACEZUK website de ressources d'assistance.