LTS LXIP3C82WI-28SDL Pro-X 8MP IP Camera User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the LTS LXIP3C82WI-28SDL Pro-X 8MP IP Camera. This camera is designed for both indoor and outdoor surveillance, offering high-resolution video and advanced detection features. Please read this manual thoroughly before using the product to ensure proper setup and functionality.

2. Consignes de sécurité

• Ensure the power supply meets the camera's requirements (12V DC or PoE IEEE 802.3af).
• N’exposez pas l’appareil photo à des températures extrêmes, à l’humidité ou à des environnements corrosifs.
• Évitez de pointer l'objectif directement vers des sources de lumière intense pendant des périodes prolongées.
• Installation should be performed by qualified personnel and comply with local electrical codes.
• Keep the camera clean and free from dust to maintain optimal performance.

3. Contenu du colis

Vérifiez que tous les éléments sont présents dans le colis :

• LTS LXIP3C82WI-28SDL Pro-X 8MP IP Camera (1 unit)
• Matériel de montage (vis, chevilles)
• Guide de démarrage rapide

4. Produit terminéview et fonctionnalités

The LTS LXIP3C82WI-28SDL is an 8 Megapixel (3840 x 2160) IP camera designed for advanced surveillance. Key features include:

• Haute résolution: Captures video at up to 8 MP (3840 × 2160) at 30 frames per second.
• Objectif fixe : Equipped with a 2.8 mm fixed lens.
• Éclairage avancé : Features built-in IR LED and warm light LED illuminators, providing clear images up to 98 feet (30 meters) even in low light conditions, enabling 24/7 color imaging.
• X-Deterrence: Integrated siren and visual alerts (red and blue flashing lights) for active deterrence.
• Conversation bidirectionnelle : Built-in dual microphones and speaker facilitate two-way audio communication.
• Détection de mouvement 2.0 : Intelligent motion detection focusing on human and vehicle recognition to reduce false alarms.
• Large plage dynamique (WDR) : True WDR 120 dB for clear images in scenes with strong backlighting.
• Stockage: Supports MicroSD card storage up to 256 GB.
• Options d'alimentation : Can be powered via Power over Ethernet (PoE IEEE 802.3af) or 12V DC.
• Durabilité: IP67 rated for outdoor use, providing protection against dust and water.
• Compression: Utilizes Smart H.264 / H.265 compression for efficient storage and bandwidth usage.
• Conforme à la loi NDAA : This device adheres to NDAA compliance standards.

5. Installation

5.1 Câblage de la caméra

The LXIP3C82WI-28SDL camera uses a network cable for both video and Power over Ethernet (PoE). It is not compatible with traditional DC power and BNC video connections.

Image 1: Camera Wiring Compatibility. This diagram illustrates the correct wiring method using a network cable for both video and Power over Ethernet (PoE), marked as 'Compatible' with a green circle. It also shows traditional DC power and BNC video cables marked as 'Not Compatible' with a red cross, indicating they should not be used with this camera model.

• Connect a standard Ethernet network cable to the camera's network port.
• If using PoE, connect the other end of the network cable to a PoE-enabled switch or NVR.
• If not using PoE, connect the network cable to a standard network switch/router and provide 12V DC power to the camera's power input.

5.2 Montage

The camera is designed for ceiling mount installation.

1. Choose a suitable mounting location on the ceiling that provides the desired field of view.
2. Use the provided mounting template (if included) to mark the drill holes.
3. Drill pilot holes and insert anchors if necessary.
4. Fixez la base de la caméra au plafond à l'aide des vis fournies.
5. Ajustez l’angle de la caméra selon vos besoins pour une couverture optimale.

5.3 Connexion réseau et configuration initiale

After physical installation and wiring, connect the camera to your network. For best compatibility, pair this Pro-X series camera with a Pro-X NVR. It is not plug & play compatible with LTS Platinum NVRs.

• Ensure your network is properly configured for IP cameras.
• Use the manufacturer's provided software or a standard IP camera tool to discover the camera on your network.
• Accédez aux web interface using its IP address to perform initial configuration, including setting a strong password, network settings, and video parameters.

6. Fonctionnement

6.1 Surveillance vidéo

Access live video feeds through a compatible NVR, PC software, or mobile application. The camera supports 8MP resolution for detailed surveillance.

6.2 Détection de mouvement 2.0

Configure Motion Detection 2.0 settings via the camera's web interface or NVR. This feature distinguishes between human and vehicle movement, reducing false alarms from other sources.

• Define detection zones and sensitivity levels.
• Set up recording schedules and notification preferences (e.g., email alerts, push notifications).

6.3 X-Deterrence (Siren and Lights)

The X-Deterrence feature can be activated manually or triggered by motion detection events. When triggered, the camera will emit a siren sound and flash red and blue lights to deter intruders.

• Configure X-Deterrence actions within the camera's event settings.
• Adjust siren volume and light flashing patterns if available.

6.4 Audio bidirectionnel

Utilize the built-in microphone and speaker for two-way audio communication. This feature is accessible through compatible NVRs or client software.

• Ensure audio input/output settings are enabled in the camera's configuration.
• Use the talk button in your monitoring software to speak through the camera's speaker.

6.5 Local Storage (MicroSD)

The camera supports a MicroSD card up to 256 GB for local video storage. This provides a backup or primary recording solution.

• Insert a compatible MicroSD card into the designated slot (refer to the camera's physical diagram for location).
• Format the MicroSD card via the camera's web l'interface avant utilisation.
• Configure recording schedules and overwrite settings for the MicroSD card.

7. Entretien

7.1 Nettoyage

Nettoyez régulièrement l'objectif et le boîtier de l'appareil photo pour garantir une image nette et un bon fonctionnement.

• Utilisez un chiffon doux et sec pour essuyer le boîtier de l'appareil photo.
• Pour la lentille, utilisez une solution nettoyante pour lentilles et un chiffon en microfibre afin d'éviter les rayures.
• N'utilisez pas de produits chimiques agressifs ou de nettoyants abrasifs.

7.2 mises à jour du micrologiciel

Vérifiez périodiquement les instructions du fabricant. website for firmware updates. Firmware updates can improve performance, add new features, and enhance security.

• Download the correct firmware version for your camera model.
• Follow the update instructions provided by the manufacturer carefully to avoid damaging the device.

8. Dépannage

8.1 Pas d'alimentation

• Verify that the power source (PoE switch/injector or 12V DC adapter) is functioning correctly.
• Vérifiez que tous les câbles sont bien connectés.

8.2 Absence de flux vidéo

• Assurez-vous que la caméra est sous tension et connectée au réseau.
• Verify network connectivity by pinging the camera's IP address.
• Check firewall settings on your network and viewdispositif de verrouillage.
• Confirm that the NVR or viewing software is compatible and correctly configured.

8.3 Mauvaise qualité d'image

• Nettoyez l'objectif de l'appareil photo.
• Adjust video settings (resolution, bitrate, exposure) in the camera's web interface.
• Ensure adequate lighting in the surveillance area, especially at night.

8.4 La détection de mouvement ne fonctionne pas

• Verify that motion detection is enabled and configured correctly in the camera settings.
• Adjust detection zones and sensitivity.
• Assurez-vous qu'aucun obstacle ne bloque la caméra. view.

9. Spécifications

10. Garantie et assistance

For warranty information and technical support, please refer to the official LTS webConsultez notre site web ou contactez votre revendeur agréé. Conservez votre reçu d'achat pour toute réclamation au titre de la garantie.

• Fabricant: LTS
• Soutien: Refer to the manufacturer's official support channels for assistance with product issues, firmware updates, and advanced configurations.