BEHORSE F22 Raptor RC Plane User Manual

Introduction

This user manual provides essential information for the safe and effective operation of your BEHORSE F22 Raptor RC Plane. Designed for beginners, this fully assembled fighter plane offers an easy-to-master flying experience. Please read this manual thoroughly before first use to ensure proper setup, operation, and maintenance.

Contenu du colis

Vérifiez que tous les éléments énumérés ci-dessous sont inclus dans votre colis :

• 1 x RC Plane (F22 Raptor Model)
• 1 x télécommande
• 3 piles au lithium 3.7 V 150 XNUMX mAh.
• 2 x Forward Propellers
• 2 x Reverse Propellers
• 1 x câble de chargement USB
• 2 x Landing Gear Sets
• 1 x Double Wing Lamp Belt (LED light strip)
• 1 x Anglais Manuel d'instructions

Figure 1 : All components included in the BEHORSE F22 Raptor RC Plane package, including the plane, remote control, batteries, propellers, USB charging cable, landing gear, and LED light strip.

Caractéristiques

Installation

1. Chargement de la batterie de l'avion

1. Connect the 3.7V 150mAh Li-po battery to the included 1S USB charger.
2. Branchez le chargeur USB à une source d'alimentation USB standard (par exemple, un port USB d'ordinateur, un adaptateur secteur USB).
3. The charging indicator light on the USB charger will typically show the charging status (refer to charger's specific indicator behavior if available).
4. Charging takes approximately 40 minutes. Do not overcharge the battery.
5. Une fois la batterie chargée, débranchez-la du chargeur.

Important: Always charge the battery before use. Remove batteries from the aircraft and remote control when not in use.

2. Installation des piles de la télécommande

1. Localisez le compartiment à piles à l'arrière de la télécommande.
2. Ouvrez le couvercle du compartiment à piles.
3. Insérez 3 piles AA de 1.5 V (non incluses) dans le compartiment, en veillant à respecter la polarité (+/-).
4. Fermez soigneusement le couvercle du compartiment à piles.

Figure 2 : The F22 Raptor RC plane and its remote control, illustrating the components involved in the setup process.

Mode d'emploi

1. Pairing the Aircraft and Remote Control

1. Ensure both the aircraft battery is charged and installed, and the remote control has fresh batteries.
2. Turn on the aircraft first, then turn on the remote control.
3. The remote control and aircraft will automatically pair. A successful pairing is usually indicated by a solid light on the aircraft or a specific sound.

2. Commandes de vol

The F22 Raptor RC Plane features a 2-channel control system, making it easy for beginners to learn.

• Accélérateur (Haut/Bas) : Controls the aircraft's altitude (climb/descend).
• Direction (Left/Right): Controls the aircraft's turning using motor differential.
• Vers l'avant: The plane is designed to move forward when throttle is applied.

Figure 3 : The 2.4GHz 2-channel remote control system in action, demonstrating ease of flight for beginners.

3. Takeoff Methods

Your F22 Raptor RC Plane supports two takeoff methods:

• Hand Throwing Off: Hold the plane firmly and gently throw it forward while simultaneously applying throttle.
• Sliding Off (with Landing Gear): Attach the landing gear. Place the plane on a smooth, flat surface. Apply throttle and allow the plane to gain speed and lift off.

4. Vol de nuit avec lumières LED

The included double wing lamp belt allows for dazzling and colorful night navigation. Attach the light strip to the designated areas on the wings for enhanced visibility and fun during evening flights.

Figure 4 : The F22 Raptor RC plane equipped with its LED light strip, making it suitable for night flights and improving visibility.

Entretien

• Entretien de la mousse EPP : The aircraft is made of EPP foam, which is highly impact-resistant and flexible. While durable, avoid excessive bending or sharp impacts to maintain its structural integrity.
• Stockage de la batterie : When not in use, store the lithium batteries in a cool, dry place. Do not leave them fully charged or fully discharged for extended periods. Remove batteries from the aircraft and remote control after each use.
• Nettoyage: Wipe the aircraft and remote control with a soft, dry cloth. Do not use harsh chemicals or solvents.
• Inspection de l'hélice : Regularly check propellers for any damage (cracks, bends). Replace damaged propellers immediately to ensure optimal flight performance and safety.

Figure 5 : The durable and flexible EPP foam material used in the F22 Raptor RC plane, designed for impact resistance.

Figure 6 : Design features contributing to the plane's durability and ease of use, including the anti-collision nose and flexible EPP material.

Dépannage

Précautions de sécurité

• Surveillance par un adulte : Children's first operation requires adult guidance and supervision.
• Environnement de vol : Play the plane in an open area. Do not fly near tall trees, buildings, power lines, or crowds.
• Conditions de vent : The plane is lightweight and cannot fly in wind speeds over 3 m/s (approximately 6.7 mph). Do not fly when wind speed exceeds 5 meters per second (approximately 11.2 mph).
• Sécurité des batteries :
  • Utilisez uniquement le chargeur fourni.
  • Do not puncture, short-circuit, or disassemble batteries.
  • N'exposez pas les batteries à des températures extrêmes ou à la lumière directe du soleil.
  • If batteries swell or leak, discontinue use immediately and dispose of them properly.
• Sécurité de l'hélice : Gardez les doigts, les cheveux et les vêtements amples loin des hélices en rotation.
• Pratique: Practice is essential for beginners to control the plane well. Start with gentle movements in a safe, open space.

Figure 7 : The F22 Raptor RC plane is an excellent choice for a child's first RC airplane, suitable for open outdoor spaces.

Garantie et assistance

BEHORSE is committed to providing quality products and customer satisfaction. If you encounter any problems when operating your RC aircraft, please do not hesitate to contact our customer service for assistance. We are dedicated to resolving almost all your issues.

Please refer to your purchase documentation or the seller's contact information for specific warranty details and support channels.