Phneems QP003
Phneems Automatic Foaming Soap Dispenser Model QP003 User Manual
Introduction
Thank you for choosing the Phneems Automatic Foaming Soap Dispenser. This manual provides essential information for the safe and efficient use of your new device. Please read it thoroughly before operation and retain it for future reference.
Image: The Phneems Automatic Foaming Soap Dispenser in black acrylic, dispensing rich foam into a hand.
Consignes de sécurité
- Ne plongez pas le distributeur dans l'eau ou tout autre liquide.
- Gardez l'appareil à l'abri de la lumière directe du soleil et des sources de chaleur.
- Use only foaming soap or diluted liquid soap as specified. Undiluted gel soap may cause clogging.
- Ce produit est destiné à un usage intérieur uniquement.
- Tenir hors de portée des enfants, sauf sous surveillance.
- N’essayez pas de démonter ou de réparer l’appareil vous-même. Contactez le service client pour obtenir de l’aide.
Contenu du colis
- 1 x Phneems Automatic Foaming Soap Dispenser (Model QP003)
- Câble de charge 1 x USB-C
- 1 x Manuel d'utilisation
Produit terminéview
The Phneems Automatic Foaming Soap Dispenser features a modern ribbed design with a transparent acrylic body and a matte black pump. It is designed for touchless operation, providing convenience and hygiene.
Image: The Phneems Automatic Foaming Soap Dispenser showing its dimensions (16cm/6.29in height, 7.0cm/2.75in diameter) and the location of the one-touch power button.
Composants clés :
- Sensor Nozzle: Détecte les mouvements de la main pour la distribution automatique.
- Bouton d'alimentation : Located on top for turning the device on/off.
- Soap Reservoir: Transparent acrylic body to hold soap.
- Port de chargement USB-C : Pour recharger la batterie interne.
Installation
1. Charge initiale
Before first use, fully charge the dispenser. Connect the provided USB-C cable to the charging port on the dispenser and to a compatible USB power adapter (not included). A full charge typically takes 3-4 hours and provides over 100 days of operation (based on 10+ uses/day).
Image: Acceptable USB-C charging methods (wall adapter, multi-port charger, wall outlet with USB-C) and an unacceptable DC charger.
2. Remplissage du distributeur
The dispenser has a 260ml (9oz) capacity. It is designed for foaming soap. If using liquid gel soap, it must be diluted to create foam.
- Remove the top pump assembly by twisting it counter-clockwise and lifting it off.
- Pour foaming soap directly into the reservoir.
- If using liquid gel soap, mix it with water in the following ratio:
- Rapport de mélange recommandé : 10%-30% Gel/Liquid Soap, 70%-90% Water.
- Carefully replace the pump assembly, ensuring it is securely twisted clockwise.
Image: The Phneems dispenser with its top removed, showing the wide opening for easy filling of soap.
Image: A visual guide for mixing liquid gel soap with water to achieve the correct foaming consistency.
Opération
1. Marche/Arrêt
Press the power button located on the top of the dispenser once to turn it on. Press it again to turn it off.
2. Distribution de mousse
Once powered on, place your hand under the sensor nozzle. The dispenser will automatically release foam within 0.25 seconds. For a larger volume of foam, wave your hand under the sensor twice.
Image: The Phneems dispenser being used in different settings, including handwashing, dishwashing, and facial cleansing.
Entretien
- Nettoyage: Essuyez l'extérieur du distributeur avec un chiffon doux et sec.amp Chiffon. N’utilisez pas de nettoyants abrasifs et n’immergez pas l’appareil dans l’eau.
- Remplissage : Refill the soap reservoir as needed, following the instructions in the "Filling the Dispenser" section.
- Stockage à long terme : If not using the dispenser for an extended period, empty the soap reservoir, clean the unit, and ensure it is fully charged before storing in a cool, dry place.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Le distributeur ne s'allume pas. | Batterie faible ou pas de charge. | Charge the dispenser fully using the provided USB-C cable. |
| No foam dispensed. |
|
|
| Foam is weak or inconsistent. | Incorrect soap dilution or type. | Adjust the soap-to-water ratio for liquid gel soap. Ensure you are using foaming soap or properly diluted gel soap. |
| Le distributeur fuit. | Pump assembly not securely attached. | Ensure the pump assembly is twisted clockwise and securely fastened to the reservoir. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | QP003 |
| Matériel | Plastique (acrylique) |
| Dimensions (L x l x H) | 2.75 po x 2.75 po x 6.29 po (7 cm x 7 cm x 16 cm) |
| Capacité de volume de liquide | 260 ml (9 oz) |
| Port de chargement | USB-C |
| Autonomie de la batterie | 100+ days on a single charge (approx. 10+ uses/day) |
| Vitesse de distribution | 0.25 secondes |
| Code UPC | 639394509273 |
Garantie et assistance
This Phneems Automatic Foaming Soap Dispenser comes with a Garantie de 1 ans from the date of purchase. If you encounter any issues or have questions regarding your product, please contact Phneems customer support directly through your Amazon order page. Provide your order number for faster service.
For more information or to contact support, visit the Phneems Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.