EASYGUARD Smart Key System Instruction Manual

1. Produit terminéview

The EASYGUARD ESW309B-N-BE-B Smart Key System is designed to upgrade your Mercedes Benz vehicle with enhanced keyless entry and security features. This system is specifically compatible with 2014 and later Mercedes Benz FBS4 cars that feature a turn-key start ignition. It is not compatible with vehicles equipped with a factory OEM push-start button.

The system provides functions similar to your original car key, including remote lock/unlock and trunk release. It also supports power window up/down functionality if your original car key has this feature. A key security feature ensures the car cannot be started if the key is not detected inside the vehicle.

Figure 1: EASYGUARD ESW309B-N Smart Key System

Figure 2: Compatibility note for push start vehicles

2. Contenu du colis

Veuillez vérifier que tous les articles sont présents dans votre colis :

• Module de controle
• Key fobs (2 pieces)
• Faisceau de fils
• Alarm antenna
• Tampon éponge

Figure 3 : Accessoires inclus avec le produit

3. Compatibilité

This smart key system is designed for specific Mercedes Benz models and ignition types:

• Véhicules compatibles 2014+ Mercedes Benz FBS4 S Class W222, C Class W205, GLC X253.
• Type d'allumage: Turn Key Start only.
• Original Key Fob Style: Your car's factory key fobs should resemble the BE or BE4 styles shown in the product images.
• Incompatible: Not suitable for Mercedes Benz cars with factory OEM push start buttons.

Figure 4: Identifying FBS4 Turn Key Start Ignition

Figure 5: Compatible Original Key Fob Styles (BE and BE4)

4. Instructions d'installation

This system requires professional installation by a trained alarm installer. The installation is plug-and-play, meaning no soldering of the car ignition cylinder or the factory key's PCB is required. However, you will need to uninstall the ignition cylinder and disassemble your car's factory key.

4.1. Préparation du véhicule

1. Access the Trunk Module: Remove the trunk boards to access the KG module located on the left side of the trunk.
2. Connect to KG Module: Unplug the original KG module connector and connect it to the provided product harness. This is a plug-and-play connection, avoiding the need for cutting or welding wires.

3. Remove Rear Seat: Pull the buckle on the bottom of the rear seat to remove it.
4. Remove Door Sill Strip: Carefully remove the door sill strip to route wiring.

4.2. Acheminement des câbles

5. Route Adapter Cable: Thread the adapter cable for the connection module through the gap on the left side of the trunk. An iron wire can be used to assist in threading. Secure the plug onto the iron wire with adhesive tape for easier pulling.
6. Route Line to Driver's Cab: Route the line along the threshold to the driver's cab.

4.3. Installation de l'antenne

7. Front PKE Antenna: Install the front PKE antenna along the edge strip near the windshield in the driver's cab.
8. Rear PKE Antenna: Install the rear PKE antenna in the rear of the vehicle, routing its line to the driver's cab as well.
9. High-Frequency Antenna: Install the high-frequency antenna inside the triangle panel.

4.4. Key Fob PCB Installation

One working factory key's PCB is required to be placed in the control module during installation.

10. Disassemble Original Key Fob: Carefully take out the PCB from your original car key fob.
11. Install PCB into Module: Install the original car key PCB flat onto the card slot within the main control module. Ensure it is securely seated.
12. Reinstall Pressure Plate: Install the pressure plate back onto the module to secure the PCB.

4.5. Dernières étapes

13. Remove FBS4 Ignition Lock: This step is crucial for the system's functionality.

14. Secure Main Unit: After organizing the lines, ensure the main unit indicator light is facing up. The main unit should be glued to the steps under the seat near the armrest box.
15. Programmation: A new programming procedure is required after completing all wiring connections. Refer to the specific programming method provided with your product or consult a professional installer.

5. Mode d'emploi

The EASYGUARD Smart Key System provides convenient remote control over your vehicle's functions:

• Verrouillage/déverrouillage à distance : Use the dedicated buttons on the new key fobs to remotely lock or unlock your vehicle.
• Libération du coffre : Press the trunk release button on the key fob to open the vehicle's trunk.
• Power Window Control: If your original car key supports it, the new key fobs will also allow you to remotely roll up or down your power windows.
• Démarrage de la voiture : The car is started using the same turn-key method as with your factory OEM key fobs.
• Fonctionnalité de sécurité : The system incorporates a high-security feature where the car cannot be started if the key is not detected inside the vehicle.

Figure 6 : Fonctions de la télécommande

Figure 7: Remote Control Capabilities

The remote working range is approximately 20-30 meters, depending on environmental factors.

Figure 8 : Portée de la télécommande

6. Entretien

To ensure the longevity and optimal performance of your EASYGUARD Smart Key System, consider the following maintenance tips:

• Garder au sec : Protect key fobs and the control module from moisture and extreme temperatures.
• Remplacement de la batterie : If remote range decreases or buttons become unresponsive, the key fob battery may need replacement. Refer to the key fob's specific instructions for battery type and replacement procedure.
• Vérifications professionnelles : Periodically have the system checked by a professional installer to ensure all connections are secure and the system is functioning correctly.

7. Dépannage

If you encounter issues with your smart key system, try the following troubleshooting steps:

• La télécommande ne répond pas : Check the key fob battery. Ensure you are within the 20-30 meter operating range.
• Voiture ne démarre pas : Verify that the key fob is inside the vehicle. Ensure the original key's PCB is correctly installed in the control module. Check all wiring connections.
• Fonctionnalité intermittente : This could indicate loose connections or interference. Recheck all installed components and wiring.
• After Installation Issues: Ensure the required programming step has been completed correctly.

If problems persist after attempting these steps, please contact a professional installer or EASYGUARD customer support for assistance.

8. Spécifications

9. Garantie et assistance

The EASYGUARD Smart Key System comes with a Garantie de 1 ans from the manufacturer, ieasyguard.com.

For technical support, installation guidance, or warranty claims, please contact EASYGUARD customer service through their official channels or the retailer where the product was purchased.

It is highly recommended to have this product installed by a certified professional to ensure proper functionality and to maintain warranty validity.