Freedompro SW0901-E Smart Mini Wi-Fi Dry Contact Relay Module

1. Introduction

The Freedompro SW0901-E is a compact Wi-Fi enabled dry contact relay module designed to integrate and automate various devices within your smart home ecosystem. This module allows for remote control and smart functionality of appliances or systems that utilize a dry contact input, such as gates, garage doors, alarm systems, boilers, and irrigation systems. It is compatible with leading smart home platforms including Matter, Apple HomeKit, Amazon Alexa, and Google Home, providing versatile control options without the need for an additional hub.

2. Consignes de sécurité

AVERTISSEMENT: Installation must be performed by a qualified electrician in accordance with all local electrical codes and regulations. Disconnect power at the circuit breaker before installation, maintenance, or removal of the device. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Ensure the power supply is completely disconnected before handling the device.
• N'exposez pas l'appareil à l'humidité ou à des températures extrêmes.
• Verify correct wiring connections as per the provided diagrams to prevent damage to the device or connected appliances.
• This device is designed for indoor use only within a flush-mounted box.

3. Contenu du colis

Veuillez vérifier que le colis contient les éléments suivants :

• Freedompro SW0901-E Smart Mini Wi-Fi Dry Contact Relay Module
• QR Code for app pairing
• Livret d'instructions (ce manuel)

4. Spécifications

5. Installation

5.1 Installation physique

1. Débrancher l'alimentation : Avant d'entreprendre tout travail électrique, assurez-vous que l'alimentation principale du circuit est coupée au niveau du disjoncteur.
2. Prepare Installation Location: The SW0901-E module is designed to be installed in a standard flush-mounted box (e.g., 502/503 type) behind existing switches or buttons.
3. Câblage : Refer to the wiring diagram below for proper connection. Connect the module according to your specific application (e.g., gate opener, boiler control). Ensure all connections are secure using the screw terminals. The module supports cables up to 2.5 mm².

The module is designed for discreet installation behind your existing wall switches or within a suitable electrical box.

4. Sécurisez le module : Once wired, carefully place the module inside the flush-mounted box, ensuring no wires are pinched.
5. Restaurer l'alimentation : After installation is complete and all connections are verified, restore power at the circuit breaker.

5.2 App Integration and Pairing

1. Download the Freedompro Home App: Download the official Freedompro Home app from the Apple App Store (for iOS) or Google Play Store (for Android).
2. Créer un compte: Ouvrez l'application et suivez les instructions à l'écran pour créer un nouveau compte ou vous connecter à un compte existant.
3. Ajouter un appareil : In the app, select the option to add a new device. You will typically be prompted to scan a QR code. Use the QR code provided with your module to initiate the pairing process.
4. Suivez les instructions à l'écran : The app will guide you through connecting the module to your Wi-Fi network and integrating it with your chosen smart home ecosystem (e.g., Apple HomeKit, Alexa, Google Home).

6. Fonctionnement

6.1 Remote Control via Freedompro Home App

Once successfully paired, you can control your connected dry contact device directly from the Freedompro Home app:

• Contrôle marche / arrêt: Tap the corresponding button in the app to activate or deactivate the dry contact, controlling your connected device (e.g., opening/closing a gate).
• Programmation: Set up schedules for automatic activation or deactivation of your devices at specific times or on certain days.
• Scénarios : Create custom scenarios to automate multiple actions with a single command or based on specific conditions (e.g., "Good Morning" scenario to open blinds and turn on a boiler).

6.2 Commande vocale

The Freedompro SW0901-E module is compatible with major voice assistants. Once integrated with your preferred smart home platform, you can use voice commands:

• Apple HomeKit : "Hey Siri, open the garage door."
• Amazon Alexa : "Alexa, turn on the irrigation."
• Google Home : "Hey Google, activate the boiler."

7. Entretien

The Freedompro SW0901-E module is designed for durability and requires minimal maintenance.

• Nettoyage: Si nécessaire, essuyez délicatement l'extérieur du module avec un chiffon doux et sec. N'utilisez pas de nettoyants liquides ni de solvants.
• Mises à jour du micrologiciel : Ensure your Freedompro Home app is up to date to receive notifications for any available firmware updates for the module. Regular updates can improve performance and security.
• Inspection: Periodically inspect the wiring connections for any signs of wear or loosening, especially during other electrical maintenance.

8. Dépannage

If you encounter issues with your Freedompro SW0901-E module, refer to the following common troubleshooting steps:

• L'appareil ne répond pas :
  • Vérifiez si le module est alimenté.
  • Vérifiez que votre réseau Wi-Fi est actif et que le module se trouve à portée.
  • Redémarrez votre routeur Wi-Fi.
  • Ensure the module's firmware is up to date via the Freedompro Home app.
• Impossible de jumeler avec l'application :
  • Assurez-vous que votre smartphone est connecté à un réseau Wi-Fi 2.4 GHz pendant le processus d'appairage.
  • Check that the QR code is clean and clearly visible for scanning.
  • Try resetting the module (refer to the Freedompro Home app or manufacturer's website pour les procédures de réinitialisation spécifiques).
• Integration with Smart Home Platform (e.g., HomeKit, Alexa, Google Home) Issues:
  • Ensure the Freedompro Home app is successfully connected to the respective smart home platform.
  • Verify that the module is visible and enabled within the Freedompro Home app.
  • For HomeKit, ensure your Home Hub (e.g., Apple TV, HomePod, iPad) is online and updated.
  • For Alexa/Google Home, ensure the Freedompro skill/service is enabled in their respective apps.
• Câblage incorrect : If the device is not functioning as expected after installation, double-check all wiring connections against the diagram in Section 5.1. Incorrect wiring can prevent operation or cause damage.

9. Garantie et assistance

For warranty information and technical support, please contact Freedompro directly. As the manufacturer and seller, Freedompro provides assistance for their products.

• Fabricant: Libertépro
• Soutien: Refer to the Freedompro official website or the Freedompro Home app for contact details and support resources.