Manuel d'utilisation du babyphone vidéo Simyke

1. Introduction

The Simyke BME28-2 Video Baby Monitor system provides comprehensive monitoring of your child with two cameras, a 2.8-inch display, and app connectivity. It features night vision, two-way audio communication, VOX auto wake-up mode for power saving, feeding clock reminders, and temperature detection. With an extended range of up to 1200ft, this portable and wireless system ensures you stay connected to your baby at all times, whether at home or on the go.

2. Contenu de la boîte

• 1x Parent Unit (Display)
• 2x Baby Cameras
• 3x adaptateurs d'alimentation
• 1x Manuel d'utilisation

Figure 2.1: All components included in the Simyke BME28-2 Video Baby Monitor package.

3. Instructions de configuration

The Simyke BME28-2 Baby Monitor is designed for easy plug-and-play setup. Devices are factory paired for immediate use.

3.1 Mise sous tension et connexion initiales

1. Connect each baby camera to a power outlet using one of the provided power adapters. A blue light on the camera indicates successful power connection.
2. Connect the parent unit (display) to a power outlet using another provided power adapter.
3. Turn on the parent unit. The cameras and monitor are factory-paired and should connect automatically.

3.2 Placement et montage de la caméra

Place the baby cameras in desired locations within range (up to 1200ft). The cameras feature a movable base for flexible positioning. They can be placed on a flat surface or optionally mounted to a wall using the provided mounting points on the base. For optimal viewing, ensure the camera has a clear line of sight to the monitoring area.

Figure 3.1 : Example of two cameras in use, monitoring different areas.

3.3 Connectivité de l'application (facultatif)

Pour télécommande viewing and additional features, download the Simyke app. The app requires a 2.4GHz Wi-Fi connection (5G Wi-Fi is not supported). Follow the in-app instructions to connect your cameras to the Wi-Fi network and link them to your account.

Figure 3.2: Illustrates both local monitor viewapplication de contrôle et de contrôle à distance viewoptions de

4. Mode d'emploi

4.1 Audio bidirectionnel

The monitor and app support two-way audio. Press and hold the talk button on the parent unit or use the microphone icon in the app to communicate with your baby.

Figure 4.1: Demonstrates the two-way audio communication feature.

4.2 Night Vision and Lullabies

The baby cameras feature automatic night vision for clear viewing in low-light conditions. The monitor also includes 5 pre-set lullabies and white noise options to help soothe your baby to sleep. Access these features through the menu on the parent unit.

Figure 4.2: Night vision and lullaby features in use.

4.3 VOX Auto Wake-up Mode

In VOX mode, the parent unit's screen will automatically turn off to conserve battery when no sound is detected below 60dB. When sound is detected, the screen will light up to alert you. You can adjust the VOX sensitivity level or disable the feature via the monitor's menu.

Figure 4.3: VOX Auto Wake-up Mode functionality.

4.4 Temperature Detection and Feeding Clock

The monitor displays the room temperature where the camera is located, ensuring your baby's comfort. A feeding clock feature can be set to remind you of feeding times.

4.5 Caméra multiple Viewing

The system supports up to 4 cameras, allowing you to monitor multiple rooms simultaneously. You can switch between camera feeds manually or use the scan mode to cycle through them automatically.

5. Entretien

• Nettoyage: Utilisez un chiffon doux et sec pour nettoyer l'écran et la caméra. N'utilisez pas de produits abrasifs ni de solvants.
• Stockage: Lorsqu'il n'est pas utilisé pendant une période prolongée, rangez l'appareil dans un endroit frais et sec, à l'abri de la lumière directe du soleil.
• Entretien de la batterie: To prolong battery life, avoid extreme temperatures and fully charge the parent unit regularly.
• Gestion des câbles: Ensure power cables are not tangled or placed where they can be tripped over or damaged.

6. Dépannage

6.1 Monitor Not Working Normally or Performing Erratically

• Alimentation: Confirm proper installation and that the power supply is securely plugged in. Only use the Simyke power supply provided. Ensure the electrical outlet is working and not controlled by a wall switch.
• Units On: Make sure both the parent unit and baby camera are turned on. Verify that the blue light on the back of the camera is illuminated.
• Range/Interference: The parent unit may be too far from the baby unit, or other equipment (e.g., Wi-Fi devices like laptops, smartphones, routers, tablets) may be affecting the connection. Try placing the parent unit at least 3 feet away from Wi-Fi devices. Move the parent unit closer to the baby unit or away from Wi-Fi devices to find better reception. Units should not be closer than 3 feet apart.
• Remise à zéro: Try resetting both the parent and baby units:
  1. Disconnect power to both units.
  2. Attendez environ 15 secondes.
  3. Reconnect adapters to both units.
  4. Wait one minute for the devices to reconnect.
• Noise/Static: Noise static and erratic performance may be caused by nearby electronic equipment and other cordless devices using the same frequency. Separate your baby monitor from these devices as much as possible.

6.2 Unable to Scan QR Code to Connect to Network (for App View(en)

• Puissance de la caméra : Check if the baby camera is properly plugged in and turned on.
• Mode d'appariement: Verify if the baby camera has entered network pairing mode normally.
• QR Code: Ensure the app can normally generate the correct QR code screenshot.
• Confirmation de numérisation : Check if the camera prompts successful code scanning.
• Message d'erreur : Note any specific error messages if the QR code cannot be read or connection fails.
• Bande Wi-Fi : Confirm that your router is operating on a 2.4G frequency band (currently only supports 2.4G Wi-Fi).
• Connection Timeout: If the camera scans the code normally but prompts a network connection timeout, reconfirm your router is 2.4G and the phone's QR code is correct. Try restarting the baby camera and re-entering pairing mode to scan the code.

7. Spécifications

8. Garantie et assistance

For any product inquiries, technical support, or warranty claims, please contact Simyke Direct customer service. Refer to the contact information provided in your product packaging or visit the official Simyke website d'assistance.

Vendeur: Simyke Direct