WORKPRO LED Work Light (Model W130016A) Instruction Manual

Introduction

Thank you for choosing the WORKPRO LED Work Light (Model W130016A). This versatile and durable work light is designed to provide bright, reliable illumination for a wide range of tasks and environments. Featuring multiple light modes, a rotatable stand, strong magnetic base, and power bank functionality, it is an essential tool for professionals and DIY enthusiasts alike. Please read this manual carefully before use to ensure proper operation and maintenance.

Figure 1: WORKPRO LED Work Light (Model W130016A)

Caractéristiques du produit

• Quatre modes d'éclairage : High, Medium, Low, and Flashing modes to suit various lighting requirements.
• Support rotatif à 180° : Adjustable stand with 7 locking positions allows for precise light angle adjustment.
• Fonction de batterie rechargeable et de banque d'alimentation : Equipped with two built-in 3.7V, 2000mAh batteries. Features a Type-C input for charging the light and a USB-A output to function as a power bank for other devices.
• Base magnétique puissante : Four N42 magnets on the back allow secure attachment to metal surfaces, providing hands-free operation.
• Construction durable : Made from Acrylonitrile Butadiene Styrene (ABS) and metal with TPR soft rubber for corrosion, wear, and impact resistance.
• Étanche et résistant aux chocs : Designed to withstand challenging environments, passing high and low temperature tests.

Figure 2 : Principales caractéristiquesview

Configuration et chargement

Charge initiale

Before first use, fully charge the WORKPRO LED Work Light. Connect the provided Type-C charging cable to the light's input port and to a compatible USB power adapter (not included). The charging indicator light will show red during charging and turn green when fully charged. A full charge typically takes approximately 3 hours.

Fonction Power Bank

To use the work light as a power bank, open the protective cover on the back of the light. Connect your device's charging cable to the USB-A output port on the work light. The output indicator light will show blue when charging an external device.

Figure 3: Charging Ports and Power Bank Function

Figure 4: Power Bank in Use

Mode d'emploi

Mise sous/hors tension et sélection du mode

Locate the power button on the back of the work light. Press the button once to turn the light on to the High brightness mode. Subsequent presses will cycle through the modes in the following order: High > Medium > Low > Flashing. To turn the light off, press and hold the power button for 2 seconds, or cycle through all modes until the light turns off.

Figure 5: Light Modes and Operation

Adjusting the Stand and Magnetic Mounting

The integrated stand can be rotated 180° and features 7 adjustable locking positions. Adjust the stand to direct the light as needed. For hands-free use, utilize the four N42 magnets on the back of the light to attach it securely to any metal surface.

Figure 6 : Support réglable

Figure 7: Magnetic Mounting in Use

Entretien

• Nettoyage: Essuyez la lumière avec un chiffon doux.amp chiffon. N'utilisez pas de nettoyants abrasifs ou de solvants.
• Stockage: Store the light in a cool, dry place away from direct sunlight when not in use for extended periods. Ensure the protective cover for the charging ports is securely closed.
• Entretien de la batterie: To prolong battery life, avoid fully discharging the battery frequently. Recharge the light regularly, even if not in active use.

Dépannage

Si les problèmes persistent, veuillez contacter le service client.

Caractéristiques

• Modèle: W130016A
• Source de lumière : LED COB
• Luminosité: Jusqu'à 2000 lumens (mode élevé)
• Modes d'éclairage : High, Medium, Low, Flashing
• Batterie: 2 x 3.7V, 2000mAh Lithium-Ion (4000mAh total)
• Port de charge d'entrée : Type-C (5V, 2A)
• Port de charge de sortie : USB-A (5V, 1A)
• Horaires d'ouverture: High: 2 hours, Medium: 3 hours, Low: 8 hours
• Matériel: Acrylonitrile butadiène styrène (ABS), métal
• Caractéristiques spéciales : 180° Rotatable Stand, 4 N42 Magnets, Waterproof, Shockproof
• Fabricant: HANGZHOU GREATSTAR INDUSTRIAL CO.LTD
• Code à barres : 820909691396

Vidéo officielle du produit

Garantie et assistance

For warranty information or technical support, please refer to the product packaging or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.