arboleaf Electric Head and Scalp Massager CM11B User Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your arboleaf Electric Head and Scalp Massager, model CM11B. Please read this manual thoroughly before operating the device and retain it for future reference.

Avertissements de sécurité

• Do not place hands or fingers into the massage heads while the device is operating.
• While the device is IPX7 waterproof and suitable for shower use, avoid prolonged immersion in water.
• Tenir hors de portée des enfants.
• Ne pas utiliser si l'appareil ou le câble de chargement est endommagé.
• Consult a physician before use if you have any medical conditions, especially on the scalp or head.
• N'essayez pas de démonter ou de réparer l'appareil vous-même. Contactez le service client pour obtenir de l’aide.

Contenu du colis

Vérifiez que tous les éléments sont présents dans le colis :

• 1 x arboleaf Scalp Massager (CM11B)
• 8 x Massage Heads (pre-installed or separate)
• 1 x câble de chargement USB
• 1 x Manuel d'utilisation (ce document)
• 1 x boîte d'emballage

Image: The arboleaf Scalp Massager CM11B and its complete package contents.

Installation

1. Chargement de l'appareil

Before first use, fully charge the massager. Connect the provided USB charging cable to the device's charging port and to a compatible USB power adapter (not included). The charging indicator light will show the charging status. A full charge takes approximately 2 hours and provides up to 80 minutes of use.

2. Attaching/Changing Massage Heads

The massager comes with 8 soft silicone massage heads. These are designed for easy attachment and removal. Ensure they are securely fastened before use. The shallow-profile design helps prevent hair tangling.

Image: Illustration of the hair-friendly design of the arboleaf massage heads compared to other types.

Mode d'emploi

1. Marche/Arrêt

Pour tourner l'appareil ON or DÉSACTIVÉ, appuyez et maintenez le bouton d'alimentation pendant 2 secondes.

2. Sélection des modes de massage

Once powered on, short press the power button to cycle through the three available massage modes:

• Mode 1 (Purple Light): Soothing/Slow mode.
• Mode 2 (Blue Light): Power/Fast mode.
• Mode 3 (Yellow Light): Smart mode, automatically switches between fast and slow speeds.

3. Mode lumière rouge

The device features a red light mode designed for deep scalp nourishment and to stimulate scalp viability. To disable the red light mode, double-click the power button when the device is on.

Image: Diagram illustrating the one-button control and different massage modes indicated by light colors.

Image: The red light function of the massager for scalp care and nourishment.

4. Application

Gently place the massage heads on your scalp or other desired body areas. Move the massager slowly to cover the entire area. The 360° kneading massage provides a deep and relaxing experience. The device will automatically shut off after ten minutes of continuous operation to prevent overuse and conserve battery.

Image: The arboleaf massager being used in the shower, highlighting its IPX7 waterproof feature.

Image: Demonstrating the versatility of the massager for use on different body parts and even pets.

Entretien

Nettoyage de l'appareil

Due to its IPX7 waterproof rating, the massager can be easily cleaned. After each use, especially if used with shampoo or conditioner, rinse the massage heads and the main body under running water. Use a soft cloth to wipe the device dry. Ensure the charging port cover is securely closed during cleaning. Do not use abrasive cleaners or immerse the device in water for extended periods.

Dépannage

• L'appareil ne s'allume pas : Assurez-vous que l'appareil est complètement chargé. Branchez-le au câble de chargement USB et laissez-le charger pendant au moins 30 minutes avant de tenter de le rallumer.
• Les têtes de massage cessent de tourner : Check if the battery is low. Recharge the device. If the issue persists, ensure no hair or debris is obstructing the massage heads.
• Le voyant rouge ne s'active pas : Double-check the operating instructions for activating/deactivating the red light mode. Ensure the device is powered on.
• L'appareil s'éteint de manière inattendue : The device has an automatic shut-off feature after 10 minutes of continuous use. This is normal operation. If it shuts off before 10 minutes, check the battery level.

If you encounter any issues not listed here, please refer to the Support section for assistance.

Caractéristiques

Garantie et assistance

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official arboleaf website. You may also contact arboleaf customer service directly for assistance.

arboleaf Official Website: www.arboleaf.com