Manuel d'utilisation du moniteur de qualité de l'air Inkbird

Introduction

Welcome to your new Inkbird Air Quality Monitor. This device is designed to provide comprehensive real-time monitoring of various air quality parameters in your environment. This manual will guide you through the setup, operation, and maintenance of your device, ensuring you get the most accurate and reliable readings.

Contenu du colis

Veuillez cocher la case correspondant aux éléments suivants :

• 1x Inkbird Air Quality Monitor
• 1x Manuel d'utilisation
• 1x câble de chargement USB Type-C

Image: Contents of the Inkbird Air Quality Monitor package, showing the device, user manual, and USB charging cable.

Produit terminéview

Familiarize yourself with the components of your air quality monitor:

Image : Avant view of the Inkbird Air Quality Monitor with key components labeled for easy identification.

• Detection Port: Located at the top, this is where air samples are drawn for analysis. Keep it clear of obstructions.
• Écran LCD : A 2.8-inch HD display showing all measurement data and menu options.
• Function Buttons (A, B, C, D): These buttons provide quick access to specific features like Real-time (RT), Record, Calibrate (Calib), and Settings (Set) as indicated on the display.
• Direction Buttons (<, ^, v, >): Used for navigating through menus and adjusting settings.
• Return Button (ESC): Used to go back to the previous screen or exit a menu.
• Bouton de confirmation (OK) : Permet de confirmer les sélections ou d'accéder aux sous-menus.

Installation

Charger l'appareil

The Inkbird Air Quality Monitor is equipped with a built-in 1200mAh lithium battery. For optimal performance, it is recommended to fully charge the device before its first use.

1. Repérez le port de chargement USB Type-C sur l'appareil.
2. Connect the provided USB Type-C cable to the device's charging port.
3. Connect the other end of the USB cable to a compatible USB power adapter (e.g., a phone charger, computer USB port) or a power bank.
4. L'appareil affichera l'état de charge à l'écran. Une charge complète prend généralement environ 3 heures.

The device can operate for 4 to 8 hours on a full charge, depending on usage. It can also be used continuously while connected to a power source.

Image: The Inkbird Air Quality Monitor being charged via its USB Type-C port, illustrating the connection and battery indicator.

Mode d'emploi

Marche/Arrêt

Pour allumer ou éteindre l'appareil :

• Locate the ON/OFF switch, typically found at the bottom or side of the device.
• Slide the switch to the "ON" position to power on the monitor.
• Slide the switch to the "OFF" position to power off the monitor.

Comprendre l'affichage

The 2.8-inch HD LCD screen provides a clear overview of current air quality. Key indicators include:

• HCHO (Formaldéhyde) : Measurement in mg/m³.
• COVT (Composés Organiques Volatils Totaux) : Measurement in mg/m³.
• PM2.5, PM1.0, PM10 (Particulate Matter): Measurements in µg/m³.
• Température: Current ambient temperature in °C.
• Humidité: Current relative humidity in %RH.
• Overall Air Pollution Level (AQI): A qualitative indicator with six levels: Fresh, Normal, Poor, Harmful, Serious, and Danger, often accompanied by a visual emoji for quick assessment.

Image : Une image détaillée view of the monitor's display, illustrating the various air quality parameters and their readings.

Navigation et paramètres

Use the control buttons to interact with the device:

• Utilisez le Boutons de direction (Up, Down, Left, Right) to move the cursor or scroll through options in menus.
• Appuyez sur le Bouton OK to confirm a selection, enter a sub-menu, or acknowledge a prompt.
• Appuyez sur le Bouton Echap to return to the previous screen or exit the current menu.
• Le Function Buttons (A, B, C, D) located below the screen may correspond to on-screen labels such as "RT" (Real-time), "Record", "Calib" (Calibrate), and "Set" (Settings), allowing direct access to these functions.

Caractéristiques principales

8-in-1 Air Quality Monitoring

The Inkbird Air Quality Monitor provides comprehensive environmental analysis by simultaneously detecting eight critical air quality parameters:

• HCHO (Formaldéhyde) : Range 0.000~1.999 mg/m³
• COVT (Composés Organiques Volatils Totaux) : Range 0.000~9.999 mg/m³
• PM2.5, PM1.0, PM10 (Particulate Matter): Range 0~999 µg/m³
• Température: Range 0°C ~ 50°C
• Humidité: Range 20~99% RH
• Overall Air Pollution Level (AQI): Categorized into Fresh, Normal, Poor, Harmful, Serious, and Danger.

Image: Visual representation of the eight air quality parameters monitored by the device.

Real-time Monitoring and Accuracy

The monitor utilizes a high-precision sensor and a built-in high-performance chip to accurately capture and process data. This ensures reliable, real-time readings, with data updates occurring every 5 seconds by default.

Image: The monitor in use, demonstrating its real-time display of air quality data.

Historical Data Record

The device features a historical data recording function, allowing you to track changes in air quality over time. This is useful for identifying trends and understanding environmental shifts.

• The data record interval can be adjusted to 5s, 10s, 20s, 30s, 45s, 60s, 90s, or 120s.
• The device can store up to 500 data points, which can be reviewed in graphical charts on the display.

Image: The monitor showing its historical data recording capability, useful for long-term monitoring.

Entretien

Nettoyage

To ensure the longevity and accuracy of your Inkbird Air Quality Monitor:

• Essuyez l'extérieur de l'appareil avec un chiffon doux et sec.
• Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the device's casing ou composants internes.
• Ensure the detection port at the top of the device remains clear of dust, lint, and other debris. Obstructions can lead to inaccurate readings.

Stockage

Lorsqu'il n'est pas utilisé pendant des périodes prolongées :

• Conservez l’appareil dans un endroit frais et sec.
• Avoid storing it in direct sunlight or environments with extreme temperatures or high humidity.

Dépannage

L'appareil ne s'allume pas

• Vérifiez l'interrupteur d'alimentation : Assurez-vous que l'interrupteur MARCHE/ARRÊT est en position « MARCHE ».
• Vérifier la batterie : The battery might be depleted. Connect the device to a power source using the USB Type-C cable and allow it to charge for at least 30 minutes before attempting to power it on again.

Lectures inexactes

• Detection Port Obstruction: Verify that the detection port at the top of the device is not blocked by dust, debris, or your hand.
• Facteurs environnementaux : Avoid using the device immediately after opening in environments with strong air currents, or near sources of high concentrations of pollutants (e.g., fresh paint, cleaning products, cooking fumes). These can temporarily skew readings.
• Temps de stabilisation: Allow the device to stabilize for a few minutes after powering on, especially when moving it to a new environment.
• Étalonnage: If available in the device settings, consider performing a calibration. Refer to the "Calib" option on the screen and follow the on-screen instructions.

Durée de vie de la batterie courte

• Charge complète : Ensure the device is fully charged. A complete charge takes approximately 3 hours.
• Modèles d'utilisation : Battery life can vary based on continuous usage and specific environmental conditions.
• Puissance continue : The device can be used while connected to a power source via the USB Type-C cable for extended operation.

Caractéristiques

Garantie et assistance

Inkbird provides official after-sales service exclusively for products purchased directly from authorized INKBIRD stores. This ensures you receive genuine products and dedicated support.

For any questions, technical assistance, or warranty claims, please refer to the contact information provided with your original purchase documentation or visit the official Inkbird website proposant les ressources d'assistance les plus récentes.