keepLiNK 5-Port Industrial Unmanaged Ethernet Switch 10/100Mbps

1. Introduction

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your keepLiNK 5-Port Industrial Unmanaged Ethernet Switch. This device is designed for reliable network connectivity in harsh industrial environments, offering robust performance and ease of use.

2. Produit terminéview

2.1 Principales caractéristiques

5 x 10/100Mbps Fast Ethernet Ports.
1Gbps Switching Capacity.
IP40 Rated Protection: Resistant to dust and solid objects larger than 1mm.
Anti-vibration and Anti-static Interference design.
4KV Lightning Protection.
Wide Operating Temperature Range: -30°C to 75°C (-22°F to 167°F).
Dual Power Inputs (DC12V-58V) for redundant power with overload current protection.
DIN-Rail Mountable for easy installation.
Durable Aluminum Housing.

2.2 Contenu du paquet

Commutateur Ethernet industriel x 1
Manuel du produit x 1

Note: The power supply for this DIN-rail Ethernet Switch is sold separately.

2.3 Produit View

Devant view of the keepLiNK 5-Port Industrial Ethernet Switch showing the five RJ45 ports and power indicator LEDs. — Figure 1 : Face avant view of the keepLiNK 5-Port Industrial Ethernet Switch. This image displays the five 10/100Mbps Ethernet ports, labeled 1 through 5, along with the P1 and P2 power indicator LEDs. The device features a robust black aluminum housing.

Côté view of the keepLiNK 5-Port Industrial Ethernet Switch showing dimensions and IP40 rating. — Figure 2 : Côté view of the keepLiNK 5-Port Industrial Ethernet Switch. This image highlights the compact dimensions of the switch (3.74 inches length, 3.58 inches width, 1.22 inches height) and mentions its IP40 protection level and aluminum housing.

3. Installation

3.1 Connexion d'alimentation

The switch supports dual redundant power inputs (PWR1 and PWR2) with a DC voltage range of 12V to 58V. Connect your external power supply to the terminal block on the side of the switch. Ensure correct polarity (P1+ and P1- for PWR1, P2+ and P2- for PWR2). The power supply is not included and must be purchased separately.

Arrière view of the keepLiNK 5-Port Industrial Ethernet Switch showing power input terminals. — Figure 3 : Arrière view of the keepLiNK 5-Port Industrial Ethernet Switch. This image shows the power input terminal block, labeled PWR1/PWR2: DC12V-58V, and the enclosure grounding screw. The terminal block allows for dual redundant power connections.

Connexion réseau 3.2

Connect your Ethernet devices (e.g., computers, cameras, routers) to any of the five 10/100Mbps RJ45 ports using standard Ethernet cables. The switch is unmanaged, meaning no configuration is required for basic network operation.

3.3 Montage sur rail DIN

The switch is designed for easy installation on a standard DIN-rail. Simply attach the integrated clip on the back of the switch to the DIN-rail until it clicks securely into place.

Image showing the keepLiNK 5-Port Industrial Ethernet Switch mounted on a DIN-rail. — Figure 4: The keepLiNK 5-Port Industrial Ethernet Switch mounted on a DIN-rail. This image demonstrates the secure attachment mechanism for industrial panel installations.

4. Mode d'emploi

4.1 indicateurs d'alimentation

P1/P2 LEDs: These indicators illuminate when power is supplied to the corresponding PWR1 or PWR2 input. If both are lit, both power sources are active.

4.2 Ethernet Port Indicators

Each Ethernet port has two LEDs: a yellow/orange light and a green light.
Yellow/Orange & Green Light ON: Indicates a 100Mbps connection.
Only Green Light ON: Indicates a 10Mbps connection.
Lumières clignotantes: Indique une activité de données sur le port.

Diagram explaining LED indicators on the keepLiNK 5-Port Industrial Ethernet Switch. — Figure 5: Diagram illustrating the LED indicators on the keepLiNK 5-Port Industrial Ethernet Switch. This image clarifies that both yellow/orange and green lights indicate a 100Mbps connection, while only the green light indicates a 10Mbps connection.

4.3 Unmanaged Operation

The keepLiNK Industrial Ethernet Switch is an unmanaged device. This means it operates automatically without requiring any software configuration. Simply connect your devices, and the switch will handle data forwarding.

5. Entretien

To ensure optimal performance and longevity of your industrial Ethernet switch, follow these maintenance guidelines:

Nettoyage: Nettoyez régulièrement l'extérieur de l'interrupteur avec un chiffon doux et sec. N'utilisez pas de nettoyants liquides ni en aérosol.
Conditions environnementales : Ensure the switch operates within its specified temperature range of -30°C to 75°C (-22°F to 167°F). While IP40 rated, avoid exposing the device to excessive moisture or direct water spray.
Gestion des câbles: Keep network cables organized and free from kinks or excessive tension to prevent damage and ensure reliable connections.
Vérification de l'alimentation électrique : Regularly inspect power connections for secure fit and any signs of wear or damage.

6. Dépannage

If you encounter issues with your keepLiNK Industrial Ethernet Switch, refer to the following common troubleshooting steps:

Pas d'alimentation : Check if the power supply is correctly connected and providing the required DC12V-58V. Verify that the P1/P2 LEDs on the switch are illuminated.
Aucun lien sur le port : Ensure the Ethernet cable is securely connected to both the switch port and the connected device. Check the cable for damage. Verify the connected device is powered on and functioning correctly.
Vitesse de connexion lente : Observe the port LEDs. If only the green light is on, the connection is 10Mbps. If both yellow/orange and green lights are on, it's 100Mbps. Ensure your connected device supports 100Mbps and that the cable is not faulty.
Connectivité intermittente : Check for loose cable connections. Ensure the operating environment is within the specified temperature range and free from excessive electromagnetic interference.

7. Spécifications

Fonctionnalité	Description
Numéro de modèle	5 Port Industrial
Ports Ethernet	5 port RJ45 10/100 Mbps
Capacité de commutation	1 Gbit/s
Taux de transfert de données	100 mégaoctets par seconde
Puissance d'entrée	DC 12V-58V (Dual Redundant)
Indice de protection	IP40
Température de fonctionnement	-30°C à 75°C (-22°F à 167°F)
Matériau du boîtier	Aluminium
Dimensions du produit	3.74"L x 3.58"l x 1.22"H
Poids de l'article	0.3 kilogrammes (10.6 onces)
Montage	DIN-Rail

8. Informations complémentaires

8.1 Vidéo du produit

Vidéo 1 : Un overview of the keepLiNK 5-Port Industrial Ethernet Switch, showcasing its design and features. This video provides a visual demonstration of the product.

9. Garantie et assistance

keepLiNK is committed to providing high-quality products and customer satisfaction. While specific warranty details are not provided in this document, we offer 24/7 customer service to assist you with any questions or concerns regarding your network switch. Please contact us for support, and we will provide a satisfactory solution within 24 hours.