MX CS-4 L 4-Inch Ceiling Speaker with LED Light User Manual

1. Produit terminéview

The MX CS-4 L is a 4-inch ceiling speaker designed for seamless integration into various environments, providing both audio output and ambient LED lighting. This speaker features a durable ABS frame and a high-compliance polymer cone for clear sound reproduction. It is suitable for a wide range of applications including homes, offices, and public address systems.

Caractéristiques principales :

• Excellent Frequency Response.
• Premium flush mount design with stylish grill.
• Lightweight and stiff polymer cones for damping and bass response.
• Integrated 5 Watt White LED Bulb.
• Bluetooth connectivity for wireless control.

2. Consignes de sécurité

Veuillez lire attentivement toutes les consignes de sécurité avant l'installation et l'utilisation. Le non-respect de ces consignes peut entraîner un choc électrique, un incendie ou d'autres dangers.

• Sécurité électrique : Ensure power is disconnected at the main circuit breaker before performing any installation or wiring. All wiring should be performed by a qualified electrician in accordance with local electrical codes.
• Emplacement d'installation: Install speakers in a location that can structurally support their weight. Avoid installing near heat sources, in direct sunlight, or in areas with excessive moisture.
• Ventilation: Ensure adequate ventilation around the speaker to prevent overheating.
• Manutention: Handle the speaker carefully to avoid damage to the cone or housing.

3. Contenu du colis

Vérifiez que tous les composants sont présents dans le package :

• MX CS-4 L Ceiling Speaker with LED Light (Quantity as per pack)
• Installation Cut-out Template

4. Configuration et installation

Follow these steps for proper installation of your MX CS-4 L ceiling speaker.

4.1 Pré-installation

• Determine the optimal location for your speaker, ensuring no obstructions (e.g., joists, electrical wires, plumbing) are present in the ceiling cavity.
• Ensure the ceiling material is suitable for mounting and can support the speaker's weight.
• Turn off power to the installation area at the main circuit breaker.

4.2 Creating the Ceiling Cut-out

1. Use the provided cut-out template to mark the desired opening on the ceiling.
2. Découpez soigneusement l'ouverture à l'aide d'un outil approprié (par exemple, une scie à cloisons sèches).

4.3 Connexions de câblage

The speaker requires connections for both audio and the integrated LED light. Refer to the back of the speaker for connection terminals.

Image 1: Arrière view of the MX CS-4 L ceiling speaker, illustrating the audio input terminals and the AC power connection for the LED light.

1. Connexion audio : Connectez votre amplifier, audio receiver, or public address system to the speaker's audio input terminals. Ensure correct polarity (+ to + and - to -) for optimal sound.
2. LED Power Connection: Connect the AC 220V, 50Hz power supply to the dedicated LED power terminals on the speaker.

4.4 Montage du haut-parleur

Image 2: Devant view of the MX CS-4 L ceiling speaker with the grill removed, highlighting the integrated LED light ring and the spring-loaded mounting clips.

1. Carefully insert the speaker into the cut-out opening.
2. The integrated screw-loaded clamps (or spring-loaded clips) will secure the speaker flush against the ceiling. Tighten screws if applicable, or ensure clips are fully engaged.
3. Attach the speaker grill by aligning it with the speaker frame and gently pushing until it snaps into place.

Image 3: Devant view of the MX CS-4 L ceiling speaker with the protective grill installed, showing its flush-mount design.

5. Fonctionnement

5.1 Lecture audio

Once connected to an audio source (amplifier, receiver, mixer), turn on your audio equipment and the speaker. Adjust the volume from your audio source. The speaker is designed to deliver clear and balanced sound for both speech and music.

5.2 Contrôle de la lumière LED

The integrated LED light can be controlled via an app or Bluetooth. Refer to the specific instructions for the control app or Bluetooth pairing process to manage the light's on/off state.

6. Entretien

Regular maintenance ensures optimal performance and longevity of your speaker.

• Nettoyage: Use a soft, dry cloth to wipe the speaker grill and frame. Do not use harsh chemicals, solvents, or abrasive cleaners.
• Élimination de la poussière : Periodically remove dust from the speaker surface to prevent accumulation that could affect sound quality or LED light output.
• Inspection: Occasionally inspect the speaker for any visible damage or loose connections.

7. Dépannage

If you encounter issues with your MX CS-4 L speaker, refer to the following troubleshooting guide:

8. Spécifications

Detailed technical specifications for the MX CS-4 L Ceiling Speaker with LED Light:

9. Informations sur la garantie

This MX product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary. Please retain your purchase receipt as proof of purchase for any warranty claims.

For details regarding extended warranty options, please refer to the information provided at the time of purchase or contact customer support.

10. Assistance clientèle

For technical assistance, troubleshooting, or warranty inquiries, please contact MX customer support:

• Fabricant: MX-MDR TECHNOLOGIES LIMITÉE
• Adresse: Plot 101 Sector 1 Gauraipada Vasai (East) Palghar - 401208 Mumbai INDE
• E-mail: info@mdrelectronics.com / dipesh@mdrelectronics.com
• No de contact: 9552529345 / 8805029016
• Website: www.mdrelectronics.com