High Pressure Washer Hose User Manual

1. Introduction

This manual provides essential information for the safe and effective use of your new high-pressure washer hose. Please read it thoroughly before initial use and retain it for future reference. This hose is designed for use with various compatible pressure washer models, offering a durable and efficient solution for your cleaning needs.

Figure 1: The 20-meter high pressure washer hose, neatly coiled, showcasing its overall length and black color.

2. Compatibilité

This high-pressure washer hose is designed to be compatible with a range of pressure washer brands and models. Please verify your pressure washer's connection type before purchase and installation.

• Compatible with INALSA Pressure Washer
• Compatible with RESQTECH Pressure Washer PW-101 ONLY
• Compatible with GERNI Pressure Washer
• Compatible with STIHL RE-80
• Compatible with LIFELONG Pressure Washer
• Compatible with BLACK DECKER Pressure Washer (Old Model)
• Compatible with HIKOKI Pressure Washer

3. Configuration et installation

Follow these steps to properly connect your high-pressure washer hose:

1. Inspecter les connexions : Before connecting, ensure both ends of the hose and the corresponding ports on your pressure washer and spray gun are clean and free of debris. Check for any damage to the threads or O-rings.
2. Raccordement au nettoyeur haute pression : Identify the threaded end of the hose. Screw this end securely onto the high-pressure outlet of your pressure washer. Hand-tighten first, then use a wrench if necessary, but do not overtighten to avoid damaging the threads.

Figure 2 : Détaillé view of the brass threaded connector for pressure washer attachment.
3. Connect to Spray Gun/Accessory: Identify the quick-connect style fitting on the other end of the hose. Insert this fitting into the inlet of your spray gun or other high-pressure accessory until it clicks securely into place. Pull gently to ensure it is locked.


Figure 3 : Détaillé view of the quick-connect style fitting for spray gun attachment.

4. Vérifiez les fuites : Once connected, turn on the water supply to the pressure washer and briefly activate the pressure washer to check for any leaks at the connection points. Tighten connections if necessary.

4. Mode d'emploi

To ensure safe and effective operation of your high-pressure washer hose, observe the following guidelines:

• Uncoil Completely: Always uncoil the hose completely before use to prevent kinks, tangles, and potential damage to the hose or reduction in water flow.
• Évitez les virages serrés : Do not bend the hose sharply or run it over sharp edges, as this can weaken the hose material and lead to leaks or bursts.
• Protect from Traffic: Keep the hose away from vehicle traffic or areas where it might be stepped on or run over, which could cause damage.
• Maintenir la distance : When operating the pressure washer, maintain a safe distance from the hose to avoid accidental contact with high-pressure water streams.
• Limites de pression: Do not exceed the maximum pressure rating of 220 Bars for this hose. Operating beyond this limit can cause hose failure and injury.

5. Entretien

Proper maintenance will extend the life of your high-pressure washer hose:

• Nettoyage: After each use, rinse the hose with clean water to remove any dirt, chemicals, or debris.
• Évacuation: Ensure all water is drained from the hose before storage, especially in freezing temperatures, to prevent ice formation and damage.
• Enroulement : Coil the hose neatly for storage. Avoid tight coiling or kinking.
• Stockage: Store the hose in a cool, dry place, away from direct sunlight, extreme temperatures, and corrosive chemicals.
• Inspection régulière : Periodically inspect the entire length of the hose for cuts, abrasions, bulges, or other signs of wear and tear. Check the connectors for corrosion or damage. Replace the hose immediately if any damage is found.

6. Dépannage

This section addresses common issues you might encounter with your high-pressure washer hose.

7. Spécifications

Key technical specifications for the High Pressure Washer Hose:

8. Informations sur la garantie

Specific warranty details for this product may vary. Please refer to the product packaging or contact the manufacturer directly for information regarding warranty coverage, terms, and conditions.

9. Assistance clientèle

For any questions, technical assistance, or support regarding your high-pressure washer hose, please contact the manufacturer:

Fabricant: Washers Hose INDIA

Numéro de contact : 7990846445