Informations importantes sur la sécurité
Please read these instructions carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer. The manufacturer is not liable for damage or injury caused by incorrect assembly or use.
- Capacité de poids : Do not exceed the maximum weight capacity specified for your model. Overloading can result in serious injury or property damage.
- Structure du mur : The wall mount must be securely attached to a suitable wall structure. Do not install on drywall alone. Ensure the mounting surface can safely support the combined weight of the mount and the television.
- Compatibilité VESA : Verify your TV's VESA mounting pattern (hole spacing) is compatible with this mount.
- Enfants: Tenir les enfants éloignés de la zone d'installation. Les petites pièces peuvent présenter un risque d'étouffement.
- Outils: Utilisez les outils appropriés pour l'installation.
Compatibilité des produits
This instruction manual covers two models of PERLESMITH Full Motion TV Wall Mounts, PSMFK7 and PSMFK1. Please identify your model and confirm your television's specifications before proceeding with installation.
Model PSMFK7
- Compatibilité de la taille de l'écran : La plupart des téléviseurs de 26 à 55 pouces.
- Capacité de poids : Jusqu'à 70 lb (31.7 kg).
- Normes VESA : 100x100mm to 400x400mm.
Figure 1: PSMFK7 Model Compatibility Overview. This image illustrates the supported screen sizes (26-55 inches), maximum weight capacity (70 lbs), and VESA mounting patterns (100x100mm to 400x400mm) for the PSMFK7 TV wall mount.
Model PSMFK1
- Compatibilité de la taille de l'écran : La plupart des téléviseurs de 26 à 60 pouces.
- Capacité de poids : Jusqu'à 77 lb (35 kg).
- Normes VESA : Up to 400x400mm (16x16 inches).
Figure 2: PSMFK1 Model Compatibility and Wall Types. This image details the wide compatibility of the PSMFK1 model, supporting TVs up to 60 inches and various VESA patterns. It also indicates suitability for single wood stud, brick, and concrete walls.
Confirm Before Purchase
Avant l'achatasing or installing, ensure your TV meets the following criteria:
- Poids du téléviseur : Your TV's weight is within the mount's capacity (70 lbs for PSMFK7, 77 lbs for PSMFK1).
- Taille du téléviseur: Your TV's screen size is within the recommended range (26-55" for PSMFK7, 26-60" for PSMFK1).
- Modèle VESA : Your TV's VESA mounting holes match one of the supported patterns.
- Type de mur : Your wall is suitable for installation (single wood stud, concrete, or brick).
- Cable Blockage: Ensure the mounting holes on your TV do not block any cables or inputs.
Figure 3: Pre-Purchase Confirmation Checklist. This image provides a visual summary of essential checks to perform before installing the TV mount, including TV weight, size, VESA, wall type, and potential cable interference.
Ce qui est inclus
Carefully unpack the box and ensure all parts are present and undamaged. If any parts are missing or damaged, do not attempt to install. Contact customer service for assistance.
Figure 4: Package Contents. This image displays the main components of the PERLESMITH full motion TV wall mount kit, including the mount assembly, a bubble level for installation, and cable ties for cable management.
Contenu typique de l'emballage :
- Assemblage du support mural TV à mouvement complet
- Supports TV (x2)
- Kit de quincaillerie de montage (vis, rondelles, entretoises, chevilles diverses)
- Niveau à bulle
- Attaches de câble (x3)
- Manuel d'instructions
Configuration et installation
Proper installation is crucial for the safety and stability of your TV. Follow these steps carefully.
Avant de commencer
- Gather all necessary tools (e.g., drill, stud finder, level, screwdriver, tape measure).
- Ensure you have a clear, safe workspace.
- Confirm your TV and wall meet the compatibility requirements.
Wall Type Considerations
Ce support est conçu pour être installé sur :
- Single Wood Stud: Locate the center of the wood stud using a stud finder.
- Solid Concrete Wall: Requires a masonry drill bit and concrete anchors.
- Mur de briques: Requires a masonry drill bit and brick anchors.
AVERTISSEMENT: Do not install this TV mount on drywall alone. Drywall cannot support the weight of the mount and TV.
Étapes générales d'installation
- Fixez les supports de télévision au téléviseur : Secure the vertical TV brackets to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and level.
- Déterminer la position de la plaque murale : Maintenez la plaque murale contre le mur à la hauteur souhaitée. viewing height. Use the included bubble level to ensure it is perfectly horizontal. Mark the drilling locations.
- Percer des trous pilotes : Drill pilot holes at the marked locations. For wood studs, drill directly. For concrete or brick, use a masonry bit and insert concrete/brick anchors.
- Plaque murale sécurisée : Fixez la plaque murale au mur à l'aide des tire-fonds et des rondelles. Serrez fermement, mais sans excès.
- Fixez le téléviseur à la plaque murale : Carefully lift the TV (with brackets attached) and hook the brackets onto the wall plate. Ensure the TV is securely seated.
- Fixez le téléviseur au support : Use the safety screws or locking mechanisms on the TV brackets to secure the TV to the wall mount, preventing accidental dislodgement.
Figure 5: Centering Your TV. This image demonstrates a TV mounted centrally on a wall, providing a visual guide for optimal placement above a feature like a fireplace.
Figure 6: Corner Mounting Example. This image illustrates how the full motion design allows for effective TV placement in a room corner, maximizing viewangles d'inclinaison.
Ajustements d'exploitation
The full motion design allows for flexible viewing angles. Adjustments can be made after installation.
- Inclinaison: The TV can be tilted +5° upwards to -15° downwards to reduce glare or optimize viewing from different heights. Loosen the tilt knobs on the TV brackets, adjust to the desired angle, and re-tighten.
- Pivot: The articulating arm allows the TV to swivel up to +/-90° (180° total range) left or right, depending on TV size and wall distance. Gently push or pull the TV to the desired angle.
- Extension/Rétraction : The mount can extend the TV up to 19.17 inches (48.7 cm) from the wall for optimal viewing or retract it back to 3.2 inches (8.1 cm) for a low-profile regarder.
- Mise à niveau : After installation, the TV can be leveled +/-3° to correct any minor misalignments. Loosen the leveling screws, adjust, and re-tighten.
Figure 7: Full Motion Adjustments. This image visually explains the tilt, extension, swivel, and leveling features of the TV mount, demonstrating the range of motion available for optimal viewing.
Entretien
Un entretien régulier garantit la longévité et le fonctionnement sûr de votre support mural pour téléviseur.
- Nettoyage: Essuyez le support avec un chiffon doux et sec pour enlever la poussière. Évitez les nettoyants abrasifs et les solvants.
- Vérifier les connexions : Vérifiez régulièrement le serrage et la fixation de toutes les vis et connexions. Resserrer si nécessaire.
- Inspecter les dommages : Inspectez régulièrement le support afin de détecter tout signe d'usure, de corrosion ou de dommage. En cas de problème, cessez immédiatement l'utilisation et contactez le service client.
Dépannage
Si vous rencontrez des problèmes pendant ou après l'installation, reportez-vous à la section suivante consacrée aux problèmes courants et à leurs solutions.
| Problème | Cause possible | Solution |
|---|---|---|
| Le téléviseur n'est pas de niveau après l'installation. | Léger défaut d'alignement lors de l'installation. | Use the +/-3° leveling adjustment feature. Loosen leveling screws, adjust, and re-tighten. |
| Le support semble lâche ou instable. | Screws not fully tightened; incorrect wall anchors used; wall structure insufficient. | Ensure all mounting screws are securely tightened. Verify correct anchors for your wall type. If the wall is insufficient, consult a professional. |
| Difficulté à régler l'inclinaison ou la rotation. | Adjustment knobs/bolts are too tight. | Loosen the relevant adjustment knobs or bolts slightly, make the adjustment, then re-tighten to hold the position. |
| Le téléviseur ne convient pas au support. | Incorrect TV size, weight, or VESA pattern for the mount model. | Verify your TV's specifications against the mount's compatibility (refer to Product Compatibility section). |
Spécifications du produit
| Fonctionnalité | PSMFK7 Model | PSMFK1 Model |
|---|---|---|
| Type de montage | Support mural | |
| Type de mouvement | Articulé, pivotant, inclinable | |
| Tailles d'écran compatibles | 26 - 55 pouces | 26 - 60 pouces |
| Capacité de poids maximale | 70 livres (31.7 kg) | 77 livres (35 kg) |
| Compatibilité VESA | 100x100mm à 400x400mm | Jusqu'à 400x400mm |
| Angle d'inclinaison | +5° / -15° | |
| Angle de pivotement | +/-90° (up to 180° total, depending on TV size) | |
| Réglage de mise à niveau | +/-3° | |
| Extension du mur | 3.2 pouces (rétracté) à 19.17 pouces (déployé) | |
| Matériel | Acier allié | |
| Types de murs compatibles | Single Wood Stud, Solid Concrete, Brick Wall | |
Garantie et assistance
For warranty information or technical support, please refer to the product packaging or contact PERLESMITH customer service directly. Keep your purchase receipt for warranty claims.
If you have any questions or require assistance with installation or operation, please do not hesitate to reach out to our support team.